Flash Memory IC Chip

Low-power 256Kbit I2C serial EEPROM with 1M erase/write cycles, 64-byte page write, and 5ms max write cycle. Ideal for data acquisition and personal communications. Available in multiple packages with up to 8 devices on same bus.

Low-voltage serial EEPROM with 1K memory, 2 MHz clock rate, and self-timed write cycle. Supports 1 million write cycles and 100-year data retention. Ideal for industrial and commercial applications. Available in multiple package options.

High-speed 128K x 8 CMOS static RAM with 10ns access time, operating at 3.3V. Low power consumption, TTL compatible, and lead-free. Ideal for industrial memory applications. Reliable supply from China.

High-reliability 256Kb F-RAM with 100 trillion read/write endurance and 10-year data retention. No-delay writes at bus speed. SPI interface up to 40 MHz. Low power 2.0-3.6V operation. Industrial temp -40°C to +85°C. RoHS compliant. Ideal for industrial controls and data logging.

High-density 4M SRAM organized as 512Kx8-bit. Features 5V ±10% supply, 70ns access time, low power standby (4µW). CMOS 6T cell technology ensures reliability. Ideal for battery backup systems. Available in 32-pin SOP/TSOP II.

High-speed photocoupler with GaAlAs IR LED and integrated photo IC in SO6 package. Features ±0.6A peak output, 3750Vrms isolation, and ±20kV/µs common-mode transient immunity. Ideal for IGBT/MOSFET gate drivers and inverters.

High dynamic range cascadable gain block for 50 or 75 ohm systems. Features 3.6 dB noise figure, surface mount plastic package, and tape-and-reel option. Ideal for narrow and broadband linear amplifiers in commercial and industrial applications.

RoHS compliant and halogen free resettable overcurrent protection device. Compact microSMD footprint saves board space. Rated 0.10A hold current with 60V max voltage. Ideal for portable electronics, automotive, and telecom applications. UL, CSA, TÜV recognized.

Broadband GaAs MMIC amplifier covering 0.1-6 GHz with 17.3 dBm P1dB, 13.2 dB gain, and 2.2 dB noise figure. Single +3V supply, 50-ohm matched, ultra-miniature SOT-363 package. Ideal for PCS, ISM, and SATCOM applications.

16Mbit page-erasable serial flash memory with 75MHz SPI bus, 256-byte page size, and 2.7V-3.6V supply. Features subsector/sector/bulk erase, software/hardware write protection, over 100K write cycles, and 20-year data retention. RoHS compliant.

High-performance CMOS static RAM with 45ns speed and ultra low power consumption. Features 2.20V-3.60V wide voltage range, automatic power-down, and easy memory expansion. Ideal for portable applications. Available in Pb-free TSOP I package.

The IL300EF linear optocoupler features high gain stability of ±0.05%/°C and wide bandwidth >200 kHz, with 5300 VRMS isolation. Ideal for power supply feedback, medical sensor isolation, and audio signal interfacing. RoHS compliant and UL/VDE approved.

High-performance 256K (32K x 8) CMOS static RAM with 55ns access speed and 4.5V-5.5V operation. Features low power consumption, automatic power-down, and TTL compatibility. Ideal for industrial and automotive applications. Available in multiple package options.

HCMOS/LSTTL/TTL compatible 10 MBd optocoupler with 1000 V/µs min CMR. Features low 3 mA input current, open collector output, and UL/CSA/VDE safety approvals. Ideal for isolated line receivers, digital isolation, and power supply applications.

High-performance CMOS 8-bit MCU with 2KB reprogrammable Flash, 128B RAM, 15 I/O lines, and 24MHz static operation. Features UART, analog comparator, and low-power modes. Ideal for embedded control. Green packaging.

High accuracy 4-bit digital attenuator with 2-dB steps to 30 dB. Features low DC power consumption (50 µW), +50 dBm IP3, and temperature stability ±0.15 dB from -40°C to +85°C. Ideal for wireless, GPS, and gain control circuits.

Industry standard 6-pin DIP optocoupler with 100% min CTR and 5300 VRMS isolation. Interfaces with common logic families. UL recognized and VDE approved. Ideal for AC mains detection, SMPS feedback, and logic isolation.

High-efficiency integrated off-line switcher with 132kHz switching frequency, frequency jittering for low EMI, and no heatsink required up to 34W. Features line sensing, external current limit, and EcoSmart energy saving. Ideal for compact power supply designs.

The MPU-9250 is a compact 9-axis MEMS sensor integrating gyroscope, accelerometer, and magnetometer in a 3x3mm QFN package. Features low power consumption (9.3µA), user-programmable ranges, and self-test. Ideal for wearables, motion control, and IoT applications.

The LSM6DS3TR is a system-in-package 6D MEMS sensor with 3D digital accelerometer and gyroscope. Features low power consumption (0.9 mA normal, 1.25 mA high-performance), smart FIFO up to 8 kbyte, ±2 to ±16 g full scale, and ±125 to ±2000 dps. ECOPACK, RoHS compliant. Ideal for pedometers, IoT, and vibration monitoring.