Flash Memory IC Chip

Low dropout voltage regulator with 1.2V dropout at 800mA. Adjustable output from 1.25V to 13.8V. Features current limiting, thermal shutdown, and ±1% accuracy. Ideal for post-regulation, battery chargers, and portable instrumentation.

The LM317DCYR is a three-terminal adjustable positive voltage regulator delivering over 1.5A from 1.25V to 37V. Features include current limiting, thermal overload protection, and 0.01% line regulation. Ideal for power management in industrial and consumer electronics.

Highly integrated linear charger with dynamic power-path management for portable devices. Supports 25-500mA charge current, 28V input with OVP, and USB-IF compliance. Ideal for Bluetooth and low-power handheld applications.

CMOS low power high voltage regulator with 30V max input, ±3% accuracy, and low dropout. Ideal for battery checkers, power failure detectors, and microcomputer reset. Available in SOT89, TO92, and SOT23 packages.

Single-channel op amp with 430 µA supply current and 1 MHz gain-bandwidth. Stable with high capacitive loads, wide 3V to 32V range. Ideal for chargers, power supplies, and industrial controls. Available in SOT-23-5 package.

The AD694ARZ-REEL is a precision mono current transmitter for 4-20mA loops, ideal for industrial process control. Features precalibrated 0-2V/0-10V inputs, wide 4.5V-36V supply, open-loop alarm, and 0.002% nonlinearity. Available in SOIC-16, supports -40°C to +85°C operation.

Low drift, low power, high accuracy instrumentation amplifier. Gain set from 1 to 10000 with one external resistor. Features 1.3 mA max supply current, 50 µV max offset voltage, and 0.6 µV/°C drift. Ideal for precision data acquisition, medical ECG, and battery-powered industrial applications.

Low cost, high accuracy instrumentation amplifier with 1.3 mA max supply current. Features 50 μV max offset voltage, 0.6 μV/°C drift, and 120 kHz bandwidth. Ideal for weigh scales, ECG, and transducer interfaces. Available in 8-lead PDIP and SOIC packages.

The AD8552ARZ is a dual zero-drift amplifier with rail-to-rail I/O, 1 μV offset, and 0.005 μV/°C drift. Ideal for precision sensors and medical instruments. Operates from 2.7V to 5V. No external capacitors needed. Extended temp range -40°C to +125°C.

Low power dual operational amplifier IC in SOP8 package. Operates from 3V to 32V single supply. Features short circuit protection, true differential input, and low input bias current. Ideal for industrial and automotive applications. Pb-free and NCV options available.

Industry-standard dual op amp with wide 3V to 36V supply range, low 300 µA quiescent current, and 1.2 MHz bandwidth. Features low offset voltage, EMI filtering, and high ESD for rugged applications. Ideal for power supplies, motor control, and industrial systems.

High precision instrumentation amplifier with programmable gain from 1 to 1000. Features 80dB min CMRR at 10kHz, low offset drift, and wide ±2.3V to ±18V supply range. Ideal for weigh scales, medical instrumentation, and industrial process controls.

JFET-input op amp with low noise 18 nV/√Hz, low THD 0.003%, and high slew rate 13 V/μs. Ideal for motor drives, UPS, and audio pre-amplifiers. Available in multiple packages with custom options.

ADI original ADM3485EARZ-REEL7 half-duplex transceiver IC with ±15 kV ESD protection. Supports 12 Mbps data rate, 3.3 V operation, and up to 32 nodes. Ideal for power/energy metering, industrial control, and EMI-sensitive systems. Available in stock.

The SN74HC08DR is a quadruple 2-input Positive-AND Gate IC in SOIC-14 package. Operates from 2V to 6V with low power consumption (20µA max ICC) and fast 8ns typical propagation delay. Drives up to 10 LSTTL loads. Green product, RoHS compliant, ideal for industrial logic applications.

High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads. Low power consumption 80µA max ICC, 12ns typical propagation delay. Green product, no Sb/Br. Ideal for industrial automation, signal processing, and communications.

The UTC CD4069 is a CMOS IC featuring six inverter circuits with wide supply voltage range (3V-15V) and high noise immunity (0.45 VDD typ). Ideal for low power consumption, ESD protection, and TTL compatibility. Available in DIP-14 and SOP-14 packages.

The CD4013BM96 is a dual-channel D-type flip-flop IC in SOIC-14 package. Features asynchronous set-reset, static operation, and 16 MHz typical clock toggle rate at 10 V. Ideal for shift registers, counters, and toggle applications. RoHS compliant.

The 74HCT245D is an 8-bit transceiver with 3-state outputs, featuring output enable and direction control. Compliant with JEDEC JESD7A, it offers ESD protection up to 2000V HBM. Ideal for bidirectional bus interfaces, it operates from -40°C to +125°C with multiple package options.

The NE555P precision timer IC operates from 5V to 15V, offering adjustable duty cycle and timing from microseconds to hours. Supports astable or monostable modes with TTL-compatible output sinking or sourcing up to 200 mA. Ideal for precision timing and oscillation circuits.