Flash Memory IC Chip

High-gain dual op amp with wide 3V to 36V supply range, 1.2MHz bandwidth, and low 300µA quiescent current. Features internal EMI/RF filters, low offset voltage, and ESD protection. Ideal for power supplies, motor control, and industrial applications.

High frequency NPN transistor with 200 MHz transition frequency and 180V collector-emitter voltage. Ideal for power amplifier and driver stage applications. Complementary to 2SA1930. Reliable performance for industrial audio systems.

High performance 3.5 digit A/D converter with LCD display driver. Features auto zero, low power

High-voltage, high-current Darlington array with 7 open-collector outputs rated at 500mA per channel. Includes integrated suppression diodes for inductive loads. Compatible with 5V TTL/CMOS logic. Ideal for driving relays, solenoids, LEDs, and DC motors. Available in SOIC-16 package.

High voltage half-bridge gate driver IC for MOSFETs and IGBTs. Features 600V floating channel, 10-20V gate drive, UVLO, and cross-conduction prevention. Compatible with 3.3V logic. Ideal for robust industrial power applications.

TB6612FNG dual DC motor driver IC in SSOP-24 package. Controls two motors with 1.2A continuous (3.2A peak) per channel, 15V max motor supply. Supports CW/CCW, short-brake, stop modes via two input signals. Includes standby, thermal shutdown, and low-voltage detection. Ideal for precise motor control in industrial automation and robotics.

The A4988 is a complete microstepping motor driver IC with built-in translator, supporting full to 1/16 step modes. Features low Rds(on) outputs, automatic decay mode selection, and mixed decay for reduced noise and power dissipation. Ideal for bipolar stepper motors up to 35V and ±2A.

The A4950ELJTR-T is a DMOS full-bridge motor driver IC in a SOIC-8 package, supporting up to 40V and ±3.5A peak output. Features include low RDS(on), overcurrent protection, synchronous rectification, and adjustable PWM current limit. Ideal for DC motor control in industrial and automotive applications.

High-voltage, high-current 8-channel NPN Darlington driver with 500mA output and 50V sustaining voltage. Features integral clamp diodes for inductive loads, ideal for relay, LED, and display drivers. Available in SOP-18 package.

Compact serial interface driver for up to 8-digit common-cathode LED displays. Features 10MHz SPI, BCD decoder, 150µA shutdown, and analog/digital brightness control. Ideal for bar graphs, panel meters, and industrial controllers.

The MAX7221CWG+ drives up to 8 digits of common-cathode LED displays via a 4-wire serial interface. Features 10MHz SPI/QSPI/MICROWIRE compatibility, 150µA shutdown, and slew-rate limited drivers for reduced EMI. Ideal for industrial controllers and panel meters.

High stability shunt regulator with adjustable output from 2.5V to 36V. Features 0.5% reference tolerance, low 0.2Ω output impedance, and 1mA to 100mA sink current. Ideal for power supplies and voltage regulation. Operating temp -40°C to 125°C.

High precision 3.3V fixed output LDO voltage regulator with 200mA max output current and ultra-low 1μA power consumption. Features ±2% accuracy, 250mV dropout at 100mA, and built-in current limit protection. RoHS compliant, compatible with low ESR ceramic capacitors. Ideal for portable electronics.

The MP1540 is a 1.3MHz current mode step-up converter in a TSOT23-5 package. It operates from 2.5V input, delivers 12V at 200mA from 5V, and includes UVLO, thermal shutdown, and internal current limit for reliable performance.

The TPS54331DR is a 28V, 3A non-synchronous buck converter with integrated 80mΩ MOSFET. Features pulse-skipping Eco-mode for high light-load efficiency, adjustable output down to 0.8V, 570kHz switching, and comprehensive protection. Available in SOIC-8 and PowerPAD packages. Ideal for battery-powered and portable applications.

Monolithic synchronous buck regulator delivering 3A continuous load current from 4.7V to 28V input. Features integrated MOSFETs, up to 95% efficiency, fixed 360kHz frequency, and programmable soft-start. Ideal for distributed power systems and notebook computers.

The L78M05CDT-TR is a 5V fixed output linear voltage regulator delivering up to 500mA. Features include thermal overload protection, short circuit protection, and output transition SOA protection. Ideal for on-card regulation in power management applications. Available in TO252 package.

TL494CDR integrates complete PWM control circuitry in a compact SOP16 package. Features 200mA sink/source outputs, variable dead time, and 5V reference. Ideal for smoke detectors, power supplies, and inverters. Reliable and customizable.

Energy-efficient off-line switcher IC integrating 700V MOSFET and control. Replaces linear supplies with lower component count. Ideal for appliances, LED drivers, and industrial controls. Supports buck and flyback topologies.

Fixed 5V output linear regulator delivering up to 100mA in SOT-89-3 package. Features internal current limiting, thermal shutdown, and short-circuit protection. Ideal for on-card regulation with no external components required. Available in ±4% tolerance.