Flash Memory IC Chip
DS90UB913QSQ/NOPB FPD-Link III Serializer 10/12 Bit 100 MHz Automotive Grade
Automotive-grade FPD-Link III serializer supporting 10-100 MHz pixel clock and 10/12-bit data payload. Features bidirectional I2C control, 2:1 input mux, and drives up to 25m cable. AEC-Q100 qualified, ESD compliant, ideal for camera and surround-view systems.
DS90C385AMTX/NOPB LVDS Transmitter IC 28bit 87.5MHz TSSOP56 Flat Panel Display
High-speed LVDS transmitter converts 28-bit LVCMOS/LVTTL data into 4 LVDS streams. Supports up to 87.5MHz clock, 2.45Gbps throughput, and spread spectrum clocking. Ideal for VGA to UXGA displays. Low power, narrow bus, TIA/EIA-644 compliant.
DS80PCI810NJYR 8 Channel PCIe Gen3 Signal Repeater Redriver 54 WQFN -40 to 85C
Ultra-low power 70 mW/channel repeater for PCIe Gen1-3 up to 8 Gbps. Features programmable CTLE, linear output driver, and SMBus/EEPROM control. Supports hot-plug with 4 kV HBM ESD. Ideal for extending board trace and cable reach.
TUSB9261IPVP USB 3.0 to SATA Bridge Controller 64-Pin HTQFP
ARM Cortex M3 based USB 3.0 to SATA bridge supporting UASP and BOT protocols. Enables high-speed data transfer for external HDD/SSD and optical drives. Features integrated transceiver, adaptive equalizer, and SPI interface. RoHS compliant.
TUSB8020BIPHPR Two Port USB 3.0 Hub IC 48 Pin HTQFP Multi Transaction Translator
The TUSB8020B is a two-port USB 3.0 compliant hub IC supporting SuperSpeed and high-speed connections. Features Multi-Transaction Translator (MTT), battery charging CDP/DCP modes, per port power switching, and OTP/EEPROM/I2C configuration. Ideal for computer systems, docking stations, and monitors.
TLV320AIC3104IRHBR Low Power Stereo Audio CODEC 32-Pin QFN 5mm x 5mm
Low-power stereo audio codec with 102-dBA SNR DAC and 92-dBA SNR ADC. Supports 8 kHz to 96 kHz sample rates, I2C control, and flexible power modes. Ideal for portable audio and telephony applications.
SN65HVD1785DR RS-485 Transceiver IC 70V Fault Protection UART Interface 8-SOIC
70V fault-protected RS-485 transceiver with ±16kV HBM ESD protection. Supports up to 256 nodes, wide common-mode range, and failsafe receiver. Ideal for industrial networks. Operating temp -40°C to 105°C.
SN65HVD232DR CAN Transceiver 3.3V 1Mbps ISO 11898-2 SOIC-8
The SN65HVD232DR is a 3.3V CAN transceiver compliant with ISO 11898-2, supporting data rates up to 1 Mbps. Features thermal shutdown, ±16 kV HBM ESD protection, and supports up to 120 nodes. Ideal for industrial automation, motor control, and HVAC systems.
SN65HVD230DR CAN Transceiver 3.3V 1 Mbps Standby Mode SOIC-8
ISO 11898-2 compliant CAN transceiver with 3.3V supply, 1 Mbps data rate, and standby mode. Features ±16 kV HBM ESD protection, up to 120 nodes, thermal shutdown, and glitch-free hot plugging. Ideal for industrial automation, motor control, and HVAC systems.
SN65HVD22DR RS-485 Transceiver IC Extended Common Mode -20V to 25V 5V SOIC-8
Extended common-mode transceiver for harsh industrial environments. Supports up to 256 nodes, 16-kV HBM ESD protection, and failsafe receiver. Ideal for long cable runs in factory automation and motor control.
SN65HVD1781DR RS-485 Interface IC 70V Fault Protected 10Mbps SOIC-8
Robust RS-485 transceiver with ±70V fault protection on bus pins. Supports 3.3V to 5V supply, up to 10Mbps signaling, and 320 nodes. Features ±16kV HBM ESD protection, failsafe receiver, and low power consumption. Ideal for HVAC, building automation, and industrial networks.
SN65HVD1780DR RS-485 Transceiver 70V Fault Protection 3.3V-5V 115kbps-10Mbps SOIC-8
The SN65HVD1780DR is a robust RS-485 transceiver with ±70V fault protection on bus pins, ±16kV HBM ESD protection, and ultra-low 1μA standby current. Supports 3.3V to 5V supply, up to 320 nodes, and signaling rates up to 10 Mbps. Ideal for HVAC, building automation, and industrial networks.
SN65HVD251DR CAN Transceiver IC 1 Mbps Standby Mode SOIC-8 Industrial
High-input impedance CAN transceiver supporting up to 120 nodes at 1 Mbps. Features ±36 V bus-fault protection, low-current standby mode (200 µA), and ISO 11898 compliance. Ideal for industrial automation and SAE J1939 networks.
ADC104S021CIMM/NOPB 10-Bit ADC 4-Channel 50-200ksps Serial Interface IC
Low-power 10-bit ADC with 4 input channels and 50-200ksps sample rate. Features 2.7V-5.25V supply, 1.94mW typ power, and AEC-Q100 automotive grade option. Ideal for portable systems, data acquisition, and instrumentation.
ADC102S051CIMM 10-Bit 2-Channel ADC 200-500 ksps A/D Converter 8-VSSOP
Low-power CMOS 10-bit ADC with 2 input channels, 200-500 ksps sample rate, and SPI-compatible serial interface. Operates on 2.7V-5.25V supply with power-down mode. Ideal for portable systems and remote data acquisition. Industrial temp range -40°C to +85°C.
ADC102S021CIMM/NOPB 10-Bit ADC 2-Ch 50-200ksps Low-Power A/D Converter IC
Low-power 10-bit ADC with 2 input channels, 50-200ksps sample rate, and 2.7V-5.25V supply. Features ±0.13 LSB DNL/INL, 61.8 dB SNR, and power-down mode. Ideal for portable systems and remote data acquisition. Available in 8-lead VSSOP package.
AD9862BSTZRL Mixed Signal Front End Processor 12-Bit ADC 14-Bit DAC 128MSPS
The AD9862BSTZRL is a versatile mixed-signal front-end processor with dual 12-bit 64MSPS ADCs and dual 14-bit 128MSPS DACs. Features programmable gain, digital filters, and DLL clock multiplier. Ideal for broadband wireless and wireline systems. Available in 128-lead LQFP.
AD8138ARZ-R7 Differential Amplifier IC 320MHz Low Distortion ADC Driver
High-performance differential amplifier IC with 320MHz bandwidth and ultra-low harmonic distortion. Ideal ADC driver for 10-16 bit converters. Features adjustable output common-mode voltage, fast 16ns settling, and 90mW low power. Supports extended temp range -55°C to +105°C for defense/aerospace.
ADC122S051CIMMX 12-Bit 2-Channel ADC 200-500 ksps SPI Serial Interface IC
Low-power 12-bit ADC with 2 input channels, 200-500 ksps sample rate, and SPI-compatible serial interface. Operates on 2.7V-5.25V supply with variable power management. AEC-Q100 qualified for automotive use. Ideal for portable systems and data acquisition.
DRV8837DSGR H-Bridge Motor Driver 1.8A Low Voltage 0-11V for Cameras Robotics
DRV8837DSGR is a low-voltage H-bridge motor driver delivering up to 1.8A with 280mΩ on-resistance. Supports PWM or PH-EN interface, operates from 0-11V motor supply, and includes overcurrent and thermal protection. Ideal for cameras, robotics, and medical devices.