Flash Memory IC Chip

OPT8320NBP HVAC Temperature Sensors Image Sensors 3D time-of-flight (ToF) sensor and controller 56-COG 0 to 70 1 Features Imaging Array: – 80 × 60 Array – 1/6” Sensor Format – Pixel Pitch: 30 μm – Frame Rate: Scalable Up to 1000-FPS Depth Output Rate with an Internal Raw Rate of 4000 FPS Optical Properties: – Responsivity: 0.35 A/W at 850 nm – Demodulation Contrast: 70% at 50 MHz – Demodulation Frequency: 10 MHz to 100 MHz Output Interface: – Digital Video Port (DVP): 8 Data

OPT301M HVAC Temperature Sensors Light To Frequency & Light To Voltage Integr Photodiode and Amp FEATURES ● PHOTODIODE SIZE: 0.090 x 0.090 inch (2.29 x 2.29mm) ● 1MΩ FEEDBACK RESISTOR ● HIGH RESPONSIVITY: 0.47A/W (650nm) ● IMPROVED UV RESPONSE ● LOW DARK ERRORS: 2mV ● BANDWIDTH: 4kHz ● WIDE SUPPLY RANGE: ±2.25 to ±18V ● LOW QUIESCENT CURRENT: 400μA ● HERMETIC TO-99 APPLICATIONS ● MEDICAL INSTRUMENTATION ● LABORATORY INSTRUMENTATION ● POSITION AND PROXIMITY SENSORS ●

OPT3001DNPR HVAC Temperature Sensors Ambient Light Sensors Ambient Light Sensor -USON -40 to 85 1 Features Precision Optical Filtering to Match Human Eye: – Rejects > 99% (typ) of IR Automatic Full-Scale Setting Feature Simplifies Software and Ensures Proper Configuration Measurements: 0.01 lux to 83 k lux 23-Bit Effective Dynamic Range With Automatic Gain Ranging 12 Binary-Weighted Full-Scale Range Settings: < 0.2% (typ) Matching Between Ranges Low Operating Current: 1.8 μA

LM82CIMQAX/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors Remote Diode and Local Digital Temperatu FEATURES Accurately Senses Die Temperature of Remote ICs, or Diode Junctions On-board Local Temperature Sensing SMBus and I2C Compatible Interface, Supports SMBus 1.1 TIMEOUT Two Interrupt Outputs: INT and T_CRIT_A Register Readback Capability 7 bit Plus Sign Temperature Data Format, 1°C Resolution 2 Address Select Pins Allow Connection of 9 LM82s on a Single Bus

LM73CIMK-0/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors Digital Ts W/Smbus Interface 1 Features Single Address Pin Offers Choice of Three Selectable Addresses Per Version for a Total of Six Possible Addresses. SMBus and I2C-compatible Two-Wire Interface Supports 400-Khz Operation Shutdown Mode With One-shot Feature Available for Very Low Average Power Consumption Programmable Digital Temperature Resolution From 11 Bits to 14 Bits Fast Conversion Rate Ideal

LM70CILD-3/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors SPI/10-Bit plus Sign Digital Temperature FEATURES 0.25°C Temperature Resolution. Shutdown Mode Conserves Power Between Temperature Reading SPI and MICROWIRE Bus Interface VSSOP-8 and WSON-8 Packages Save Space UL Recognized Component APPLICATIONS System Thermal Management Personal Computers Disk Drives Office Electronics Electronic Test Equipment KEY SPECIFICATIONS Supply Voltage 2.65V to 5.5V Supply

ADM3053BRWZ-REEL7 UART Interface IC CAN Interface IC Sgnl & Pwr Iso Tncvr w/ Intg Iso DC/DC FEATURES 2.5 kV rms signal and power isolated CAN transceiver isoPower integrated isolated dc-to-dc converter 5 V operation on VCC 5 V or 3.3 V operation on VIO Complies with ISO 11898 standard High speed data rates of up to 1 Mbps Unpowered nodes do not disturb the bus Connect 110 or more nodes on the bus Slope control for reduced EMI Thermal shutdown protection High common-mode

AM26C31IDR AM26C31MWB UART Interface IC RS-422 Interface IC Quad Diff Line Drvr 1 Features Meets or Exceeds the Requirements of TIA/EIA- 422-B and ITU Recommendation V.11 Low Power, ICC = 100 μA Typical Operates From a Single 5-V Supply High Speed, tPLH = tPHL = 7 ns Typical Low Pulse Distortion, tsk(p) = 0.5 ns Typical High Output Impedance in Power-Off Conditions Improved Replacement for AM26LS31 Device Available in Q-Temp Automotive – High-Reliability Automotive Applicatio

LTC6820HMS#PBF UART Interface IC Specialized isoSPI Iso Communications Int FEATURES n AEC-Q100 Qualified for Automotive Applications n 1Mbps Isolated SPI Data Communications n Simple Galvanic Isolation Using Standard Transformers n Bidirectional Interface Over a Single Twisted Pair n Supports Cable LeCM GROUPhs Up to 100 Meters n Very Low EMI Susceptibility and Emissions n Configurable for High Noise Immunity or Low Power n Engineered for ISO26262 Compliant Systems n Requires No

LTC2852IDD#TRPBF UART Interface IC RS-232 Interface IC 1x 5V RS232/RS485 Multiprotocol Tran FEATURES n 3.3V Supply Voltage n 20Mbps Maximum Data Rate n No Damage or Latchup Up to ±15kV HBM n High Input Impedance Supports 256 Nodes (C-, I-Grade) n Operation Up to 125°C (H-Grade) n Guaranteed Failsafe Receiver Operation Over the Entire Common Mode Range n Current Limited Drivers and Thermal Shutdown n Delayed Micropower Shutdown: 5μA Maximum (C-, I-Grade) n Power Up/Down Glitch

LTC1485IS8#TRPBF UART Interface IC RS-232 Interface IC 1x 5V RS232/RS485 Multiprotocol Tran FEATURES n ESD Protection Over ±10kV n Low Power: ICC = 1.8mA Typ n 28ns Typical Driver Propagation Delays with 4ns Skew n Designed for RS485 or RS422 Applications n Single 5V Supply n −7V to 12V Bus Common-Mode Range Permits ±7V Ground Difference Between Devices on the Bus n Thermal Shutdown Protection n Power-Up/Down Glitch-Free Driver Outputs n Driver Maintains High Impedance in

LTC1387CG#PBF UART Interface IC RS-232 Interface IC 1x 5V RS232/RS485 Multiprotocol Tran FEATURES Two RS232 Transceivers or One RS485 Transceiver Operates from a Single 5V Supply Guaranteed Receiver Output with Inputs Floating or Shorted to Ground Logic Selectable Fast/Slow RS485 Driver Slew Rate Low Supply Current: 7mA Typical 5μA Supply Current in Shutdown Self-Testing Capability in Loopback Mode Separate Driver and Receiver Enable Controls Driver Maintains High Impedance

ADUM7441ARQZ-RL7 UART Interface IC Digital Isolators 1kV RMS Quad-CH Digital FEATURES Small, 16-lead QSOP 1000 V rms isolation rating Safety and regulatory approvals UL recognition UL 1577: 1000 V rms for 1 minute Low power operation 5 V operation 2.25 mA per channel maximum at 0 Mbps to 1 Mbps 11.5 mA per channel maximum at 25 Mbps 3.3 V operation 1.5 mA per channel maximum at 0 Mbps to 1 Mbps 8.25 mA per channel maximum at 25 Mbps Bidirectional communication Up to 25 Mbps

ADUM5402WCRWZ-1 UART Interface IC Digital Isolators 4.5-5.5 V DC 10 Mbit/s4chnl w/isopwr FEATURES Power integrated, isolated dc-to-dc converter Regulated 3.3 V or 5.0 V output Up to 500 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component

ADUM1401ARWZ-RL ADUM1401BRWZ-RL ADUM1401WSRWZ ADUM1402ARWZ-RL UART Interface IC Digital Isolators Digital Quad-CH FEATURES Qualified for automotive applications Low power operation 5 V operation 1.0 mA per channel maximum at 0 Mbps to 2 Mbps 3.5 mA per channel maximum at 10 Mbps 31 mA per channel maximum at 90 Mbps 3 V operation 0.7 mA per channel maximum at 0 Mbps to 2 Mbps 2.1 mA per channel maximum at 10 Mbps 20 mA per channel maximum at 90 Mbps Bidirectional communication

ISO7341CDWR UART Interface IC Digital Isolators Quad-Channel 3/1 Dig Safe High 16-SOIC 1 Features Signaling Rate: 25 Mbps Integrated Noise Filter on the Inputs Default Output High and Low Options Low Power Consumption, Typical ICC per Channel at 1 Mbps: – ISO7340x: 0.9 mA (5-V Supplies), 0.7 mA (3.3-V Supplies) – ISO7341x: 1.2 mA (5-V Supplies), 0.9 mA (3.3-V Supplies) – ISO7342x: 1.3 mA (5-V Supplies), 0.9 mA (3.3-V Supplies) Low Propagation Delay: 31 ns Typical (5-V

ISO7240CDWR UART Interface IC Digital Isolators Quad Ch 4/0 25Mbps Dig Iso 1 Features 25 and 150-Mbps Signaling Rate Options – Low Channel-to-Channel Output Skew; 1 ns Maximum – Low Pulse-Width Distortion (PWD); 2 ns Maximum – Low Jitter Content; 1 ns Typ at 150 Mbps Selectable Default Output (ISO7240CF) > 25-Year Life at Rated Working Voltage 4-kV ESD Protection Operates With 3.3-V or 5-V Supplies High Electromagnetic Immunity (see ISO72x Digital Isolator Magnetic-Field

ISOW7844FDWER UART Interface IC Reinforced Digital Isolator With Integrated Power 16-SOIC -40 to 125 1 Features 100 Mbps data rate Robust isolation barrier: – >100-Year projected lifetime at 1 kVRMS working voltage – Up to 5000 VRMS isolation rating – Up to 10 kVPK surge capability – ±100 kV/μs minimum CMTI Integrated high-efficiency DC-DC converter with on-chip transformer 3-V to 5.5-V Wide input supply range Regulated 5-V or 3.3-V output Up to 0.65-W output power 5Vto5V

GD75232DBR UART Interface IC RS-232 Interface IC Mult RS232 Driver description/ordering information The GD65232 and GD75232 combine threedrivers and five receivers from theTexas Instruments trade-standard SN75188 andSN75189 bipolar quadruple drivers and receivers, respectively. The pinout matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required, and allow easy interconnection of the UART and serial-port connector of an IBM

DS90UB914QSQ/NOPB UART Interface IC Display Interface IC 10/12-Bit FPD-Link III SER/DES 1 Features 10-MHz to 100-MHz Input Pixel Clock Support Single Differential Pair Interconnect Programmable Data Payload: – 10-bit Payload up to 100 MHz – 12-bit Payload up to 75 MHz Continuous Low Latency Bidirectional Control Interface Channel With I2C Support at 400 kHz 2:1 Multiplexer to Choose Between Two Input Imagers Embedded Clock With DC-Balanced Coding to Support AC-Coupled