Flash Memory IC Chip

BiCMOS dual bidirectional I2C buffer with voltage-level translation from 0.8V to 5.5V. Supports standard, fast, and FM+ modes up to 1 MHz. Extends bus capacitance to 550 pF. Lockup-free operation with ESD protection. Ideal for servers, routers, and industrial equipment.

2-bit bidirectional voltage-level translator for I2C/SMBus, UART, and GPIO. Supports 1.65V to 5.5V with no direction pin. Features internal 10-kΩ pullups, VCC isolation, and ESD protection up to 8-kV HBM. Ideal for interfacing 1.8V, 2.5V, 3.3V, and 5V logic levels.

Single bus buffer gate with 3-state output, supports 1.65V to 5.5V input. Low power consumption (10μA max ICC), ±24mA output drive at 3.3V. Available in SOT-23 package. Ideal for high-speed data acquisition and motor controls.

Single bus buffer gate with 3-state output, supports 1.65V to 5.5V VCC operation. Features ±24-mA output drive, low 10-μA ICC, and Ioff back-drive protection. Available in ultra-small 0.64-mm² package. Ideal for high-speed data acquisition and motor control.

Single retriggerable monostable multivibrator with Schmitt-trigger inputs. Supports 1.65V to 5.5V operation, 5.5V tolerant inputs, and pulse duration control via external RC. Ideal for AV receivers, PCs, and SSDs. ESD protected, latch-up performance exceeds 100mA.

The SN74LVC1G11DCKR is a single 3-input positive-AND gate from Texas Instruments. It supports 1.65V to 5.5V VCC, offers 4.1ns max tpd at 3.3V, and features Ioff partial-power-down mode. Available in a compact SC70-6 package, it provides ESD protection and low power consumption, ideal for portable and industrial applications.

8-bit non-inverting voltage level translator with dual configurable power rails. Supports 1.2V to 5.5V translation, up to 110 Mbps push-pull. No direction control needed. ESD protected. Ideal for handsets, tablets, and PCs.

Two-bit non-inverting bidirectional voltage-level translator with no direction control needed. Supports 1.65V to 5.5V operation, 24Mbps push-pull data rate, and VCC isolation. Ideal for I2C, UART, and GPIO mixed-voltage systems.

High-performance octal bus transceiver for 1.65V to 3.6V operation. Supports 5V mixed-mode, live insertion, and back-drive protection. ESD rated 2000V HBM. Ideal for servers, switches, and LED displays.

EPC1PC8 is a 1Mb 8MHz serial configuration memory IC for Altera SRAM-based FPGAs. Features low 50uA supply current, near-zero standby, and easy four-pin interface. Supports ACEX 1K, APEX 20K, Cyclone, Stratix series. Available in PDIP, PLCC, TQFP packages.

The CD4069UBPWR is a hex inverter IC in a compact 14-pin TSSOP package. Features standardized symmetrical output, 30ns typical propagation delay, and ultra-low input current. Ideal for logic inversion, pulse shaping, and oscillators. 100% tested at 20V. JEDEC compliant.

High-speed Si-gate CMOS 2-input AND gate with wide supply range 2V to 5.5V. Features symmetrical output impedance, low power dissipation, and ESD protection up to 2000V. Specified from -40 to +125°C. Available in SOT753 package.

4-bit non-inverting voltage-level translator with dual configurable power rails. Supports 1.65V to 5.5V operation, 24 Mbps push-pull data rate, and robust ESD protection up to ±8kV contact discharge. Ideal for handsets, tablets, and PCs.

Two-bit non-inverting bidirectional voltage-level translator with no direction control needed. Supports 24 Mbps push-pull and 2 Mbps open drain data rates. Features VCC isolation, partial-power-down mode, and latch-up performance exceeding 100 mA. Ideal for I2C, SMBus, UART, and GPIO applications.

This one-bit bidirectional voltage-level translator supports 1.65V to 5.5V operation with no direction-control signal needed. Features 24 Mbps push-pull data rate, ESD protection up to 8 kV, and latch-up performance exceeding 100 mA. Ideal for handsets, tablets, and PCs. Available in SC70-6 package.

This 4-bit non-inverting voltage level translator supports bidirectional auto-direction sensing with dual supply rails from 0.9V to 3.6V. Features low power consumption (5μA max), ESD protection, and partial-power-down mode. Ideal for industrial, telecom, and personal electronics applications.

TXB0104RUTR 4-bit noninverting voltage-level translator with dual configurable power rails (1.2V-3.6V A port, 1.65V-5.5V B port). Supports bidirectional translation between 1.2V, 1.8V, 2.5V, 3.3V, and 5V nodes. Features low power consumption (5-μA max ICC), I OFF partial power-down, and latch-up performance exceeding 100 mA. Ideal for headsets, smartphones, and tablets.

The TXB0104PWR is a 4-bit bidirectional voltage-level translator supporting 1.2V to 5.5V operation. Features low 5μA max ICC, VCC isolation, and partial power-down mode. Ideal for tablets, smartphones, and desktop PCs. Available in TSSOP-14 package.

Single positive-edge-triggered D-type flip-flop for 1.65V to 5.5V operation. Features low power consumption (10μA max ICC), ±24mA output drive, and Ioff back-drive protection. Supports live insertion and partial-power-down. Ideal for servers, LED displays, and telecom infrastructure.

Texas Instruments SN74LVC2G241 dual buffer and line driver supports 1.65V to 5.5V VCC operation. Features 24-mA output drive, low 10-μA ICC, and Ioff for partial-power-down. Ideal for AV receivers, PCs, and portable devices. Available in NanoFree package.