Flash Memory IC Chip

JEDEC SSTL-18 compliant linear regulator for DDR-II memory termination. Delivers 500mA continuous and 900mA peak current with low output offset. Features thermal shutdown, STR functionality, and no external resistors required. Available in SOIC-8 and SO PowerPAD-8 packages.

JEDEC SSTL-2 compliant DDR termination regulator supporting VDDQ down to 1.35V. Delivers 1.5A continuous current with 3A transient peaks. Features low output offset, thermal shutdown, and Suspend to RAM (STR) functionality. Ideal for FPGA, industrial/medical PC, and HSTL termination applications.

Precision supervisory circuit monitors 5V/3.3V/3V supplies with 4.63V threshold. Features 140ms min reset pulse, 15μA low current, and active-low RESET output. Ideal for factory automation, PLC, and portable equipment. Drop-in upgrade to MAX809.

Low-noise LDO regulator delivering 250mA output with 6.5μVRMS noise and 82dB PSRR. Features 12μA quiescent current, 120mV dropout, and thermal protection. Ideal for RF, analog, and battery-powered devices. Available in DSBGA, SOT-23, and X2SON packages.

Fixed-output LDO regulator with 0.75% tolerance (A grade), 200mV dropout at 100mA, and 600μA quiescent current. Features overcurrent/thermal protection, shutdown mode (0.01μA), and -40°C to 125°C range. Ideal for smart meters, motor control, and portable devices.

High-precision 3V shunt voltage reference IC in SOT-23 package. Offers ±0.1% accuracy, 60μA to 15mA operating range, and no external capacitor needed. Ideal for portable, automotive, and industrial applications. AEC-Q100 qualified options available.

Low dropout regulator delivering 500mA output with 300mV dropout and 30μA quiescent current. Features ultra-low noise of 20μVRMS, reverse battery protection, and stable with ceramic capacitors. Ideal for battery-powered and noise-sensitive systems.

The LT1021DCS8-5 is a precision 5V voltage reference IC featuring ultralow drift of 5ppm/°C max and very low noise below 1ppm P-P. It offers high ripple rejection over 100dB, operates in series or shunt mode, and sources/sinks up to 10mA. Ideal for AD/DA converters, precision regulators, and portable reference standards.

Ultralow noise 1.2μV p-p XFET voltage reference with 5ppm/°C drift. Supports 3V-18V input, 500mV dropout. Sources 10mA, sinks 5mA. Ideal for precision data acquisition, military, and avionics. AQEC qualified, -55°C to +125°C.

Precision 4.096V band gap voltage reference with ultralow 5 μV p-p noise and 9 ppm/°C drift. Features 300 mV dropout, 140 μA supply current, and no external capacitor needed. Ideal for battery-powered instrumentation and industrial controls. Automotive grade available.

High-accuracy 3V voltage reference with ±0.1% initial accuracy and 8 ppm/°C temp coefficient. Low dropout, 100 µA quiescent current, and low noise. Ideal for precision data acquisition, industrial, and battery-powered devices. Available in SOT-23 package.

Complete standalone dual output power supply delivering 26A single or 13A dual output. Wide input range 4.5V to 16V, output 0.6V to 2.5V. Features multiphase current sharing up to 100A, overvoltage/overcurrent protection, and RoHS compliant finish. Ideal for telecom, networking, and industrial equipment.

Complete dual 8A per channel step-down DC/DC regulator system in a compact 15mm LGA/BGA package. Input range 2.7V-5.5V, output 0.6V-5V. Features overcurrent/thermal protection, frequency synchronization, and RoHS options. Ideal for telecom, networking, and industrial equipment.

High efficiency buck-boost module regulator with 4.5V to 36V input range and 0.8V to 24V adjustable output. Delivers 5A continuous (10A buck mode) with up to 98% efficiency. Features current mode control, power good signal, and fault protection. Compact 15mm LGA package. Pb-free and RoHS compliant.

High accuracy multicell battery stack monitor measuring up to 12 cells with 1.2mV max error. Features isoSPI interface for 1Mb isolated communication over 100m, 290μs measurement time, and passive cell balancing. Ideal for EVs and energy storage.

The LTC6804 is a 3rd generation multicell battery stack monitor measuring up to 12 cells with 1.2mV max error. Features isoSPI interface, 290μs measurement, passive balancing, and ISO26262 compliance. Ideal for EVs, backup systems, and grid storage.

The LTC6803 is a complete battery monitoring IC measuring up to 12 cells in series with 0.25% max error. Features stackable architecture, passive cell balancing, 1MHz serial interface with PEC, and 12μA standby. Ideal for EVs, backup systems, and high power portable equipment.

The LTC4415 integrates two 50mΩ monolithic ideal diodes for efficient power path management. Supports 1.7V to 5.5V operation, adjustable 0.5A to 4A current limit per channel, low reverse leakage, and thermal protection. Ideal for high-current ORing, battery sharing, and supercapacitor applications.

High efficiency 17V 1A synchronous step-down regulator with 1MHz fixed frequency. Features ultralow quiescent current below 3.5μA, 95% max efficiency, and wide 2.7V to 17V input range. Ideal for portable, industrial, and automotive applications.

High efficiency dual step down DC/DC converter with up to 95% efficiency and 40μA quiescent current. Operates from 2.5V to 5.5V input, adjustable output from 0.6V to 5V. Internal 0.35Ω switches eliminate Schottky diodes. Ideal for portable devices.