Flash Memory IC Chip

High efficiency synchronous buck-boost converter with 95% efficiency and 500mA output. Operates above, below or equal to output voltage. Features programmable 300kHz-2MHz oscillator, Burst Mode operation, and output disconnect. Ideal for portable devices.

The LTC3530EMS is a high-efficiency buck-boost DC/DC converter supporting 1.8V to 5.5V input and 600mA output. Features synchronous rectification up to 96% efficiency, programmable frequency to 2MHz, and automatic Burst Mode operation. Ideal for portable devices.

High efficiency synchronous step-up DC/DC converter with up to 95% efficiency. Delivers 60mA at 3.3V from 1V input. Features output disconnect, inrush current limit, and ultralow 7μA quiescent current. Ideal for portable instruments and battery-powered devices. Available in tiny 6-Lead SC70 package.

High-efficiency synchronous buck converter with up to 96% efficiency and 4MHz operation. Features low RDS(ON) switches, Burst Mode for low quiescent current, and supports tiny capacitors. Ideal for portable devices and board-mounted power supplies.

High voltage monolithic synchronous buck-boost DC/DC converter with 2.7V to 40V input/output range. Delivers up to 2A output, 95% efficiency, programmable frequency to 2MHz, and low noise PWM. Ideal for automotive, industrial, and telecom applications.

The LTC1144 is a monolithic CMOS switched-capacitor voltage converter converting 2V to 18V input to complementary -2V to -18V output. Features 99.9% voltage conversion efficiency, 93% power efficiency, low 120Ω output resistance, and power shutdown to 8μA. Ideal for data acquisition, automotive, and battery systems.

High efficiency synchronous step-down regulator with 3A continuous output, 42V input range, and ultralow 2.5µA quiescent current. Features Burst Mode for low ripple, spread spectrum for low EMI, and compact MSOP package. Ideal for GSM and general step-down applications.

The LT4363-2 surge stopper protects loads from high voltage transients up to 100V. Features adjustable output clamp, fast overcurrent limit under 5μs, reverse input protection to -60V, and auto-retry after faults. Ideal for automotive, avionic, and industrial surge protection.

Ultralow quiescent current 2.7μA step-down regulator with wide 4.3V to 60V input range. Delivers up to 3A output with low ripple Burst Mode operation. Features adjustable frequency up to 2MHz, power good flag, and soft-start. Ideal for automotive and industrial supplies.

Wide input range 3.6V to 58V, 2A output, adjustable 100kHz to 2.4MHz switching frequency. Low ripple Burst Mode, overvoltage lockout to 80V, thermal protection, and soft-start. Ideal for automotive and industrial supplies.

High-performance DC/DC LED driver controller with 3000:1 True Color PWM dimming, 75V output, and 4.5V-40V input. Supports boost, buck, buck-boost, SEPIC, and flyback topologies. Features constant-current/voltage regulation, adjustable frequency up to 1MHz, and open LED protection. Ideal for high-power LED lighting and battery chargers.

Wide 4V-60V input range, 200kHz fixed frequency, drives N-channel MOSFET. Features Burst Mode for

Wide input range 3.6V to 36V, 3.5A output, adjustable 200kHz to 2.4MHz switching frequency. Features low shutdown current under 1μA, integrated boost diode, power good flag, and thermal protection. Ideal for automotive, industrial, and portable power regulation.

The LT3684 is a 36V/2A monolithic buck regulator with adjustable 300kHz to 2.8MHz frequency. Features 0.18Ω switch, integrated boost diode, power good flag, and soft-start. Ideal for automotive, industrial, and portable power supplies. Available in thermally enhanced MSOP-10 and DFN packages.

The LT3682 is a 1A monolithic buck regulator with 3.6V to 36V input range and 60V transient protection. Features low ripple Burst Mode, adjustable 250kHz-2.2MHz frequency, soft-start, and power good flag. Ideal for automotive and industrial supplies. Available in a 12-pin 3mm × 3mm DFN package.

High-efficiency monolithic buck regulator with 3.6V to 36V input, 3.5A output, and adjustable 200kHz to 2.4MHz frequency. Features low ripple Burst Mode, integrated boost diode, power good flag, and thermal protection. Ideal for automotive, industrial, and portable power applications.

High-efficiency PWM DC/DC converter with 2A internal switch, adjustable 200kHz-2.5MHz frequency, and wide 2.5V-32V input. Configurable as boost, SEPIC, or inverting converter. Ideal for VFD, TFT-LCD, and GPS bias supplies. Available in compact 3mm × 3mm DFN package.

The LT3501EFE is a dual current mode PWM step-down DC/DC converter with two internal 3.5A switches. It features independent inputs, soft-start, and power good pins for complex tracking. With 250kHz to 1.5MHz adjustable frequency and antiphase switching, it reduces ripple and component size. Ideal for DSP, disc drives, and distributed power regulation.

Original TI DRV603PWR 3-VRMS line driver with adjustable gain in TSSOP-14 package. Features DirectPath technology for superior audio performance. Ideal for clock timer applications. In stock, fast shipping.

Integrated RTC/calendar with I2C bus and EEPROM in SOIC-8 package. Features backup battery switching for reliable timekeeping. Ideal for utility meters, HVAC, networking, and industrial equipment. New original stock.