Flash Memory IC Chip

High efficiency synchronous step-down regulator with 24 µA quiescent current. Supports 3.5V to 60V input, 1A output. Features adjustable frequency up to 2.2 MHz, integrated sync rectification, and meets EN55022 EMI standards. Ideal for industrial and telecom power supplies.

The LM3671 is a 2MHz, 600mA step-down DC-DC converter optimized for single Li-Ion cells. Features automatic PFM/PWM switching, 16μA quiescent current, and internal sync rectification for high efficiency. Ideal for mobile phones, portable instruments, and automotive applications.

Low-noise LDO regulator delivering 500mA output with 12μVRMS noise and 75dB PSRR. Features low 30μA quiescent current, reverse current protection, and operates from 1.6V to 6.5V input. Ideal for RF, sensors, and audio applications.

Low-noise LDO regulator delivering 300mA output with 12μVRMS noise and 75dB PSRR. Features low 12μA quiescent current, 120mV dropout, reverse current protection, and thermal overload protection. Ideal for RF, analog, and battery-powered applications.

High-performance LDO regulator delivering 150mA output with ultra-low 6.5μVRMS noise and 75dB PSRR. No bypass capacitor needed. Stable with 0.47μF ceramic caps. Thermal protection, ±2% tolerance, and -40°C to 125°C operation. Ideal for RF and analog circuits.

Low dropout CMOS voltage regulator with 60mV dropout at 150mA load. Features active shutdown, fast turnon/turnoff, thermal protection, and stable with 1μF ceramic capacitors. Ideal for portable battery-powered RF and analog devices. Operating temperature -40 to +125°C.

Ultra-low noise LDO regulator with 150mA output, 100mV dropout, and 1.5μA shutdown current. Stable with ceramic capacitors. Ideal for battery-powered wireless devices. Operating temp -40°C to 125°C.

LP3982 low-dropout CMOS linear regulator delivers 300mA output with 120mV typical dropout. Features 90μA quiescent current, 1nA shutdown mode, and stable with ceramic capacitors. Ideal for battery-powered devices and wireless handsets. ±2% accuracy with overcurrent protection.

Ultra-low-noise, low-dropout regulator optimized for battery-powered systems. Delivers 300mA output from 2.5V to 6V input with 132mV dropout. Features 60dB PSRR,

High-performance LDO regulator delivering 800mA output with ultra-low 5µVRMS noise and 90dB PSRR at 10kHz. Wide 3V-20V input range, 200mV dropout. Stable with ceramic capacitors. Ideal for RF, telecom, and precision instrumentation. ±1% accuracy.

High-performance 800mA adjustable LDO voltage regulator with 2.5V to 16V input range. Features ultra-low noise (18µV), low ground pin current, and 1% output accuracy. Ideal for ASIC, DSP, and FPGA power supplies. Includes overcurrent and overtemperature protection.

Low dropout CMOS linear regulator with 450 mV dropout at 1 A, 2.5% output accuracy, and wide 2.7 V to 10 V input range. Features thermal protection, foldback current limiting, and enable pin. Ideal for hard drives, notebooks, and battery devices.

LP38691QSD-ADJ/NOPB is a low-dropout CMOS linear regulator with 2% precision reference voltage and 250 mV dropout at 500 mA. Supports 1.25V to 9V adjustable output, operates from -40°C to +125°C, and features thermal overload protection and foldback current limiting. Ideal for battery-powered devices and portable instrumentation.

Texas Instruments FlexCap LDO regulator delivers 3A output with 2.7V to 5.5V input range. Adjustable output from 0.6V to 5V. Stable with ceramic, tantalum, or aluminum capacitors. Features ±1.5% accuracy, overcurrent protection, and -40°C to +125°C operation. Ideal for ASIC, DSP, and FPGA power supplies.

Micropower voltage regulator with ultra-low 75µA quiescent current and 380mV dropout at 100mA. Features high accuracy, tight regulation, and low temperature coefficient. Ideal for battery-powered systems. Available in multiple output voltages and packages.

High-efficiency step-down DC-DC power module delivering up to 10A output. Features integrated shielded inductor, 92% efficiency, and wide 6V-20V input range. Requires only 7 external components. Includes thermal shutdown, short-circuit protection, and frequency synchronization. Ideal for 12V rail point-of-load applications.

The LMR62014 is a 1.6 MHz current-mode boost converter with 2.7V to 14V input and up to 20V output. Its 1.4A internal switch and tiny SOT-23 package enable high power density. Features cycle-by-cycle current limiting, thermal shutdown, and internal compensation for easy design. Ideal for space-constrained embedded systems, LCD displays, and LED applications.

Wide input 4V-60V step-down regulator with 600mA output. Ultra-low 28μA standby current, fixed 0.7MHz/2.1MHz frequency, internal compensation and soft start. Ideal for industrial and automotive power systems. Over-current and thermal protection. SOT-6L package.

High-efficiency 40V buck regulator with 2A continuous output, ultra-low 40μA quiescent current, and adjustable 200kHz to 2.5MHz switching frequency. Features integrated high-side MOSFET, internal compensation, and robust protection. Ideal for automotive, industrial, and telecom applications.

The REG104GA-3.3 is a low-noise LDO voltage regulator featuring DMOS topology for ultra low dropout of 230mV at 1A. No output capacitor required for stability. High accuracy ±2%, low noise 33μVRMS, and thermal protection. Ideal for portable and battery-powered equipment.