Flash Memory IC Chip

Adjustable 3-terminal positive voltage regulator delivering 1.5A output over 1.25V to 57V range. Features overload protection, 80dB ripple rejection, and wide operating temperature. Ideal for industrial power supplies and automation systems.

LM317A adjustable 3-terminal positive voltage regulator delivers 1.5A output over 1.25V to 37V range with 1% accuracy. Features overload protection, 80dB ripple rejection, and wide -40°C to 125°C operation. Ideal for automotive LED lighting, battery chargers, and post-regulation.

The LM3150MHX/NOPB is a 42V synchronous step-down controller delivering up to 12A. Features wide 6V-42V input, adjustable output down to 0.6V, programmable 1MHz frequency, and no loop compensation. Ideal for telecom, networking, and power modules.

Positive voltage regulator IC delivering 1A output with typical 0.5V dropout. Features reverse battery protection, short circuit limit, and thermal overload. Ideal for post regulators, logic supplies, and industrial instrumentation. Available in multiple packages.

Micropower 3-terminal adjustable band-gap voltage reference diode. Features 1.24V to 5.30V output, 10μA to 20mA operating current, 1Ω dynamic impedance, and low temperature coefficient. Ideal for portable meters, regulators, and general analog circuits.

High-efficiency PWM step-down regulator with 3.0A output, 56mΩ PMOS switch, and 3.0MHz switching frequency. Features enable pin, internal soft-start, cycle-by-cycle current limit, and thermal shutdown. Ideal for compact designs in set-top boxes, HDDs, and USB devices.

The LM2775DSGR is a regulated switched-capacitor voltage doubler delivering a fixed 5V output at up to 200mA. It operates from 2.7V to 5.5V input, requires only three ceramic capacitors, and features PFM mode for light-load efficiency. Ideal for USB OTG, HDMI power, and portable electronics.

High frequency PWM step down DC DC converter in thin SOT 6 package. Supports 1A output, 3V to 20V input range, and up to 90% efficiency. Features internal soft start, thermal shutdown, and 30nA shutdown current. Ideal for point of load regulation and battery powered devices.

High-efficiency current-mode boost converter with 1.6 MHz fixed frequency and 30V internal DMOS switch. Supports 2.7V to 14V input, up to 800mA switch current. AEC-Q100 qualified option available. Ideal for LED drivers, portable devices, and GPS.

High-efficiency buck regulator IC with up to 94% efficiency, 150-mΩ DMOS switch, and 260-kHz oscillator. Supports 3.3V, 5V, 12V fixed or 1.2V-37V adjustable output. Features thermal shutdown, current limiting, and low 50-μA standby. Ideal for battery chargers and system preregulators.

High-efficiency buck regulator IC delivering up to 96% efficiency and 1A output. Features 260kHz fixed frequency, wide 8V-40V input range, and requires only 5 external components. Available in SOIC-8, PDIP-8, and WSON-16 packages with thermal shutdown and current limit protection.

The LM2664M6X is a CMOS charge-pump voltage converter that inverts 1.8V to 5.5V input to -1.8V to -5.5V output. Delivers up to 40mA with 91% efficiency and 1µA shutdown current. Ideal for battery-powered systems, cellular phones, and handheld instruments. Available in 6-pin SOT-23 package.

High-efficiency step-up DC-DC regulator for battery-powered systems. Features up to 90% efficiency, 2-MHz switching frequency, and 0.17-Ω internal MOSFET. Supports 1-4 cell alkaline or Li-ion systems. Available in small VSSOP and WSON packages.

The LM2585T-12/NOPB is a monolithic switching regulator IC for flyback, boost, and forward converters. It features a 3A NPN switch, 100kHz fixed frequency, wide 4V to 40V input, and ±4% output tolerance. Built-in soft-start, current limit, and thermal shutdown ensure reliable operation with minimal external components.

High-efficiency 3A step-down voltage regulator IC with wide 40V-60V input range. Features adjustable output from 1.23V to 57V, fixed 5V option, thermal shutdown, and current limit protection. Ideal for buck converters and on-card regulators.

Integrated 42V 170mΩ N-channel MOSFET, adjustable output from 1.225V, 50kHz-1MHz frequency, emulated current mode control. Ideal for industrial power supplies with robust protection and WEBENCH support.

Wide input range synchronous buck controller with emulated peak current mode control. Features 1.5% precision reference, programmable frequency up to 750 kHz, adaptive dead-time, and hiccup mode protection. Ideal for automotive and industrial DC-DC applications.

High voltage non-synchronous buck controller with 4.5V to 42V input range. Features emulated current mode control, programmable frequency up to 1 MHz, spread spectrum EMI reduction, and thermal shutdown. Ideal for automotive and industrial DC-DC applications.

The LM25056PSQ/NOPB is a high-performance power measurement IC with 3V-17V input range, I2C/SMBus PMBus interface, and 12-bit resolution. It monitors VIN, IIN, PIN, and VAUX in real time with 1 kHz sampling. Features remote temperature sensing, programmable thresholds, and black box fault capture. Ideal for server backplanes and base station power systems. ±1.5% current accuracy over -40°C to +85°C.

High-efficiency 42V 3A buck regulator with 500kHz switching frequency. Features internal compensation, low ESR ceramic capacitor stability, and precision enable. Ideal for industrial control and telecom systems. Offers fixed 5V or adjustable output.