Argon Recovery Unit

Product Description: Compressor, Purification Skid, Equipment Overview,Cold Box, Circulating Water Pump, Air Cabinet, Raw Material Filter An argon recovery unit is a system of equipment used to recover argon gas. It usually consists of several components, including an argon compressor, a condenser, a dryer, a filter and so on. Working principle: Argon gas is compressed and transported to the condenser through the argon compressor to condense the moisture and impurities in the

Filter Filter,Filtering Apparatus,Strainer,Argon Recovery ,Hydraulic Oil Filter,Stainless Steel Is an indispensable device on the pipeline of conveying media, usually installed in the pressure reducing valve, pressure relief valve, water level valve, square work filter other equipment at the inlet end of the device. The filter consists of a cylinder, stainless steel screen, drainage part, transmission device and electrical control part. After the water to be treated passes

Product Details Candle Filter,Argon Recovery Unit Candle filter is a new type of pulse blowback filter, which has the outstanding features of airtight operation, large filtration area, high dirt-holding capacity, easy pulse blowback of filter cake, and high degree of automation, etc. The filter can be used for direct filtration, pre-coating filtration, slurry thickening, cake recycling, and cake washing, and it is widely used in a wide range of special filtration conditions,

Product Description Microporous Filter, Filter,PE/PA Microporous Filter Tubes,Filter Recycling Technology The vacuum sampler collects air samples in a pre-vacuumed sampling canister, which can be used for both instantaneous and averaged samples. Instantaneous samples are collected simply by opening the valve of the sampling canister and using the vacuum inside the canister to draw the air sample into the canister for a short period of time (usually less than 5 seconds). The

Cooler,Cold Box,Reefer Container,Argon Recovery,SS304 Cold box - the role of this system is to remove nitrogen, hydrogen, carbon monoxide and other impurities in argon gas 1. plate heat exchanger: the product argon and exhaust gas after low temperature distillation through the heat exchanger for cold recovery And make the crude argon temperature from room temperature down to the temperature required by the working condition (-157 ℃); 2. the main column of the distillation

Pneumatic Butterfly Valve,Butterfly Valve,Control Unit,Valves,Nitrogen Recovery System Mew block Mew block Mew block is the equipment fixed in the structural frame or containerized frame, and the whole combination of pipes, valves, pumps containers, instruments, etc. are installed in it. According to the process flow, spatial direction, and spatial arrangement of the module, the process equipment, process piping, high structure, or containerized frame inside the pew block are

Automatic self-cleaning filter present Full-automatic cleaning filter is mainly composed of body, screen, differential pressure controller, discharge valve, motor or hydraulic piston, stainless steel brush or suction. It has the advantages of simple structure, obvious effect of decontamination, automatic sewage discharge, constant flow during sewage discharge, etc. It is very widely used in industrial sewage treatment. Fully automatic from the control of cleaning can be

Product Details Pressure Transmitter,Gas Recycling System,Argon Recovery Unit Closed plate filter is a kind of high-efficiency, energy-saving, closed operation precision clarification filtration equipment, which is widely used in petrochemical, grease, paint, food and beverage, biological medicine and other industries. It has unique structure, small volume, high filtration efficiency, high transparency and good fineness of filtrate, no material loss, no consumption of filter

Products Pneumatic Butterfly Valve,Butterfly Valve,Control Unit,Valves,Nitrogen Recovery System The double membrane gas cabinet has a 3/4 sphere shape and is fixed by steel rails on the cement base or anaerobic tank roof. The main body is made of specially processed polyester material (the main components are red mud soft body composite membrane and red mud soft body sandwich mesh), and the tank consists of outer membrane, inner membrane, bottom membrane (above ground cabinet

Low temperature distillation process Pre-treatment of raw gas: The gas mixture containing argon is first preliminarily treated to remove solid impurities and moisture, etc., so as to prevent these impurities from freezing in the subsequent low-temperature environment, which will affect the operation of the equipment. Compression and cooling: the gas is compressed after pretreatment to increase the gas pressure, and then the temperature is lowered through the cooling system to