Hardened Steel Washers

EN14399-6 Zinc plated/HDG Washer/ Hardened Steel Washer M12-M36 Description:The EN 14399-6 washer, also known as a hardened steel washer, is a type of washer that conforms to the EN 14399-6 standard. It is commonly used in structural steel applications where high-strength fasteners are employed.EN 14399-6 hardened steel washers are essential components in applications where high load-bearing capacity, durability, and reliability are crucial. Their hardened steel construction,

EN14399-6 Hardened Steel Washer, M12-M36, Plain/Dacromet for Structural Engineering​Description: EN 14399-6 hardened steel washers are high-strength washers that conform to the European standard EN 14399-6, which specifies the requirements for washers used with high-strength structural bolts. These washers are specifically designed to provide enhanced load-bearing capabilities and durability in critical applications.EN 14399-6 washers adhere to the dimensional requirements

Standard:DIN125A Description: DIN125A Washer, is a common fastener fitting. It is usually made of steel and is available in different sizes and coatings. The washer complies with DIN 125A, a German industry standard that specifies the size and performance requirements for washers. It is suitable for a variety of mechanical and structural applications and is mainly used to provide a uniform pressure distribution between bolts and nuts, preventing parts from loosening and

Standard:DIN125A Description: DIN125A Washer, is a common fastener fitting. It is usually made of steel and is available in different sizes and coatings. The washer complies with DIN 125A, a German industry standard that specifies the size and performance requirements for washers. It is suitable for a variety of mechanical and structural applications and is mainly used to provide a uniform pressure distribution between bolts and nuts, preventing parts from loosening and

Standard:DIN125A Description: DIN125A Washer, is a common fastener fitting. It is usually made of steel and is available in different sizes and coatings. The washer complies with DIN 125A, a German industry standard that specifies the size and performance requirements for washers. It is suitable for a variety of mechanical and structural applications and is mainly used to provide a uniform pressure distribution between bolts and nuts, preventing parts from loosening and

Standard:F436M Description: The F436M washer, also known as a hardened steel washer, is a specific type of washer designed for use with high-strength metric structural bolts. It conforms to the specifications outlined by the ASTM F436M standard. Here are the details regarding the F436M washer with zinc plated or hot-dip galvanized (HDG) finish: Size range: The F436M washer is available in a metric size range, typically specified in millimeters. The common size range for these

Standard:DIN9021 Description: DIN 9021 washers, also known as hardened steel washers, are available with a black oxide finish. The black oxide coating is a conversion coating that provides several benefits, including enhanced corrosion resistance and improved lubricity. Here are some additional details about DIN 9021 washers with a black oxide finish: 1.Material: DIN 9021 washers with a black oxide finish are made from hardened steel. Hardened steel offers excellent strength

Standard:USS Description: The USS washer, also known as a hardened steel washer, is a type of washer commonly used in the United States. It conforms to the USS (United States Standard) sizing system. The USS washer is made from hardened steel, which provides enhanced strength and durability. It is available in various sizes ranging from 1/4" to 3" in diameter. The size is specified in inches and refers to the nominal diameter of the fastener it is designed to be used with. In

Standard:EN14399-6 Description: The EN 14399-6 washer, also known as a hardened steel washer, is a type of washer that conforms to the EN 14399-6 standard. It is commonly used in structural steel applications where high-strength fasteners are employed. The EN 14399-6 washer is made from hardened steel, which imparts increased strength and durability to the washer. It is available in various sizes ranging from M12 to M36, with the "M" indicating the metric thread size and the

Standard:USS Description: The USS washer, also known as a hardened steel washer, is a type of washer commonly used in the United States. It conforms to the USS (United States Standard) sizing system. The USS washer is made from hardened steel, which provides enhanced strength and durability. It is available in various sizes ranging from 1/4" to 3" in diameter. The size is specified in inches and refers to the nominal diameter of the fastener it is designed to be used with. In

Standard:DIN6340 Description: The DIN 6340 washer, also known as a hardened steel washer, is a type of washer that conforms to the DIN 6340 standard. It is commonly used in various industrial applications to distribute the load of a threaded fastener, such as a bolt or a nut, over a larger surface area. The DIN 6340 washer is made from hardened steel, which provides enhanced strength and durability. It is available in various sizes ranging from M6 to M30, indicating the

Standard:DIN6340 Description: If you are referring to hardened steel washers in the size range of M12 to M36 with zinc plating or hot-dip galvanizing (HDG), here is some general information about these options: 1.Zinc Plated: Zinc plating involves applying a thin layer of zinc to the surface of the washer. This coating provides some degree of corrosion resistance and helps protect the underlying steel from rusting. Zinc-plated washers are commonly used in indoor or low

Standard:DIN6340 Description: If you are referring to hardened steel washers in the size range of M6 to M30 with a black oxide finish, here is some general information: 1.Material: Hardened steel washers are made from steel that has undergone a hardening process to increase its strength and durability. 2.Black Oxide Finish: The black oxide coating is a conversion coating applied to the surface of the washer. It provides several benefits, including improved corrosion

Standard:DIN9021 Description: DIN 9021 washers, also known as hardened steel washers, are available with different surface finishes, including plain and Dacromet coatings. Let's explore each of these options: 1.Plain Finish: Plain finish refers to an uncoated washer. It does not have any additional protective coating or treatment on its surface. Plain finish washers are commonly used in applications where corrosion resistance is not a significant concern. They are suitable

Standard:DIN9021 Description: The DIN 9021 washer, also known as a hardened steel washer, is another type of washer that conforms to the German Industrial Standard (DIN) 9021 specification. It is used in various applications to provide load distribution and prevent damage to the surface being fastened. Here are some details about DIN 9021 washers: 1.Material: DIN 9021 washers are made from hardened steel, which offers high strength and durability. 2.Sizes: These washers are

Standard:DIN6916 Description: The DIN 6916 washer, or hardened steel washer, is typically available with different surface coatings, including zinc plating and hot-dip galvanizing (HDG). 1.Zinc Plated: Zinc plating involves applying a thin layer of zinc to the surface of the washer. This coating provides some level of corrosion resistance and helps protect the underlying steel from rusting. Zinc-plated washers are commonly used in indoor applications or environments where

Standard:DIN6916 Description: The DIN 6916 washer, also known as a hardened steel washer, is available in different finishes, including plain and Dacromet coatings. Let's look at each of these options: 1.Plain Finish: The plain finish refers to an uncoated washer. It does not have any additional protective coating or treatment on its surface. Plain finish washers are typically used in applications where corrosion resistance is not a significant concern. They are suitable for

Standard:DIN6916 Description: The DIN 6916 washer, also known as a hardened steel washer, is a type of washer that conforms to the German Industrial Standard (DIN) 6916 specification. It is commonly used in structural applications where high-strength connections are required. Here are some key features of the DIN 6916 washer: 1.Material: The washer is made from hardened steel, which provides excellent strength and durability. 2.Sizes: The DIN 6916 washer is available in a

Standard:F436M Description: The F436M Washer, also known as a hardened steel washer, is designed for use with fasteners that have nominal thread diameters ranging from M12 to M100. These washers are specifically manufactured to meet the requirements outlined in the ASTM F436/F436M standard. They are commonly used in various industrial applications where high-strength fastening is required. Key features of the F436M Washer include: 1.Material Grade: The washers are made from