Redundant Power Supply Module

3BSE013228R1 ABB DP820 Pulse Counter RS-422 Power Supply Module Description of DP820 3BSE013228R1 DP820 is an two-channel pulse counting module for incremental pulse transmitters up to 1.5 MHz. Each channel contains counters and registers for position/length and speed/frequency measurement. Each channel provides three balanced inputs for connection of a pulse transmitter, one digital input and one digital output. Pulse transmitters with RS422, +5 V, +12 V, +24 V and 13 mA

ABB 3BSE028926R1 Incremental Pulse Counter Module DP840 Description of DP840 3BSE028926R1 The DP840 module consists of 8 identical independent channels. Each channel can be used for pulse count or frequency (speed) measurement, maximum 20 kHz. The inputs can also be read as DI signals. Each channel has a configurable input filter. The module perform self-diagnostics cyclically. With advanced diagnostics, for single or redundant applications. Interface for NAMUR, 12 V and 24 V

3BSC690074R1 ABB DO890 Digital Output 4x1 ch Power Supply Module Description of DO890 3BSC690074R1 The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel can drive a nominal current of 40 mA into a 300 ohm field load such as an Ex certified solenoid valve, alarm sounder unit or indicator lamp. Open and short circuit detection can be

ABB DO840 3BSE020838R1 Digital Output Module Redundant Power Supply Module Description of DO840 3BSE020838R1 This module has 16 digital outputs. The maximum continuous output current per channel is 0.5 A. The outputs are current limited and protected against over temperature. The outputs are divided into two groups with eight output channels and one voltage supervision input in each group. Each output channel consists of a current limited and over temperature protected high

DO821 3BSE013250R1 ABB Digital Output Relay 8×1 Ch, ABB S800 I/O Description of DO821 3BSE013250R1 The DO821 is an 8 channel 230 V a.c./d.c. relay (NC) output module for the S800 I/O. The maximum output voltage is 250 V a.c. and the maximum continuous output current is 3 A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay supply voltage

3BSE008514R1 ABB DO820 Digital Output Modules Redundant Power Supply Module Description of DO820 3BSE008514R1 The DO820 is an 8 channel 230 V a.c./d.c. relay (NO) output module for the S800 I/O. The maximum output voltage is 250 V a.c./d.c. and the maximum continuous output current is 3 A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay

Allen-Bradley 1769-PB2 CompactLogix DC 2A/0.8A Power Supply Module General Information of 1769-PB2 CompactLogix Power Supply 24V DC Input, 2A @ 5V DC Output AC or DC power options for CompactLogix™ controllers and distributed Compact I/O architecture Representative Photo Only (actual product may vary based on configuration selections) SPECIFICATIONS Product Series Component Type PLC & I/O Operating Temperature, Max Operating Temperature, Min Storage Temperature, Max Storage

ABB DO815 Digital Output Module S800 I/O Modules 3BSE013258R Description of DO815 3BSE013258R1 The DO815 is a 8 channel 24 V digital output module for the S800 I/O. The output voltage range is 10 to 30 V and the maximum continuous output current is 2 A @ 24 V. The outputs are protected against short circuits, and over load. The outputs are divided into two individually isolated groups with four output channels in each group. Each output channel consists of a short circuit and

3BUR001455R1 ABB DO814 Digital Output Current Sinking Description of DO814 3BUR001455R1 The DO814 is a 16 channel 24 V digital output module with current sinking for the S800 I/O. The output voltage range is 10 to 30 volt and the maximum continuous current sinking is 0.5 A. The outputs are protected against short circuits and over temperature. The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each

3BSE008510R1 ABB DO810 Digital Output Redundant Power Supply Module DescriptionThis module has 16 digital outputs. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature. The outputs are divided into two individually isolated groups with eight output channels and one voltage supervision input in each group. Each output channel consists of a short circuit

DI890 3BSC690073R1 ABB 8 Channel 230 V Digital Input Module Description The DI890 Digital Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel is galvanically isolated from the power supply, ground, and each other. Intrinsically safe Proximity sensors or volt-free contacts can be powered and monitored by any

3BSE013210R1 ABB DI830 Digital Input Power Supply Module Description The DI830 is a 16 channel 24 V d.c. digital input module for the S800 I/O. The input voltage range is 18 to 30 V d.c. and the input current is 6 mA at 24 V d.c. Each input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier. The module cyclically performs self-diagnostics. Module diagnostics include: Process power supply

ABB 3BSE008550R1 DI821 8 Channel Digital Input Module Description The DI825 is an 8 channel 125 V d.c. digital input module for the S800 I/O. The input range is 71 - 150 V and the input current is 3.0 mA at 125 V. The inputs are individually isolated. Every input channel consists of current limiting components, EMC protection components, input state indication LED, optical isolation barrier. Channel 1 can be used as voltage supervision input for channels 2 - 4, and channel 8

ABB 3BSE008550R1 DI821 8 Channel Digital Input Module Description The DI821 is a 8 channel, 230 V a.c./d.c, digital input module for the S800 I/O. This module has 8 digital inputs. The ac input voltage range is 164 to 264 V and the input current is 11 mA at 230 V a.c. The d.c. input voltage range is 175 to 275 volt and the input current is 1.6 mA at 220 V d.c. The inputs are individually isolated. Every input channel consists of current limiting components, EMC protection

3BSE008512R1 ABB DI820 Digital Input Redundant Power Supply Module Description Additional Information Medium Description: Individually galvanic isolated channels. Use Module Termination Unit TU811, TU813, TU831, TU839, TU851. Product Type: I-O_Module Ordering HS Code: 853890-- Parts suitable for use solely or principally with the apparatus of heading 85.35, 85.36 or 85.37.- Other Customs Tariff Number: 85389099 Dimensions Product Net Depth / Length: 102 mm Product Net Height:

ABB DI811 3BSE008552R1 PR:C PLC Module DI 811 S800 Digital Input 48V 48 V Description This module has 16 digital inputs. The input signal voltage range is 36 to 60 volt d.c. and the input current is 4 mA at 48 V. The inputs are divided into two individually isolated groups with eight channels and one voltage supervision input in each group. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation

ABB DI811 3BSE008552R1 PR:C PLC Module DI 811 S800 Digital Input 48V 48 V Description This module has 16 digital inputs. The input signal voltage range is 36 to 60 volt d.c. and the input current is 4 mA at 48 V. The inputs are divided into two individually isolated groups with eight channels and one voltage supervision input in each group. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation

ABB DI810 3BSE008508R1 Digital Input 24V 16 ch Module Description This module has 16 digital inputs. The input voltage range is 18 to 30 volt d.c. and the input current is 6 mA at 24 V. The inputs are divided into two individually isolated groups with eight channels and one voltage supervision input in each group. Every input channel consists of current limiting components, EMC protection components, input state indication LED and optical isolation barrier. The process

ABB AO895 3BSC690087R1 Analog Output HART 8 ch Control Module Description The AO895 Analog Output Module has 8 channels. The module includes Intrinsic Safety protection components and HART interface on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel can drive up to 20 mA loop current into a field load such as an Ex certified current-to-pressure converter and is limited to 22 mA in overload

AO890 3BSC690072R1 Power Supply Module Input Control Module Description The AO890 Analog Output Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel can drive up to 20 mA loop current into a field load such as an Ex certified current-to-pressure converter and is limited to 22 mA in overload conditions. TU890 and