Redundant Power Supply Module

AO845A 3BSE045584R1 Analog Output Unit ABB Redundant Power Supply Module Description The AO845/AO845A Analog Output Module for single or redundant applications has 8 unipolar analog output channels. The module performs self-diagnostic cyclically. Module diagnostics include: External Channel Error is reported (only reported on active channels) if the process power supply that supply voltage to output circuitry is too low, or the output current is less than the output set value

3BSE008546R1 ABB AO820 Analog Output Redundant Power Supply Module Description The AO820 Analog Output Module has 4 bipolar analog output channels. The choice of current or voltage output is configurable for each channel. There are separate sets of terminals for voltage and current outputs, and it is up to the user to wire outputs properly. The only differences between current or voltage channel configuration is in software settings. To supervise the communication to the A/D

ABB AO815 Analog Output Module 3BSE052605R1 HART 8 ch Description The AO815 Analog Output Module has 8 unipolar analog output channels. The module performs self-diagnostic cyclically. Module diagnostics include: External Channel Error is reported (only reported on active channels) if the process power supply that supply voltage to output circuitry is too low, or the output current is less than the output set value and the output set value is greater than 1 mA (open circuit).

3BSE038415R1 ABB AO810V2 Analog Output Redundant Power Supply Module Description The AO810/AO810V2 Analog Output Module has 8 unipolar analog output channels. To supervise the communication to the D/A-converters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision, which is reported when supply voltage to output

AI895 3BSC690086R1 Analog Input ABB Redundant Power Supply Module Description The AI895 Analog Input Module can directly interface 2-wire transmitters and with a particular connection it can also interface 4-wire transmitters without losing the HART capability. The AI895 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external

ABB AI893 3BSC690141R1 Analog Input Module Redundant Power Supply Module Description The AI893 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. The module can be configured for either 2 or 3-wire RTD sensors or for TC sensors. In TC mode, channel 8 be used for Cold Junction (ambient) temperature measurements,

ABB AI890 3BSC690071R1 AI890 Analog Redundant Power Supply Module Description The AI890 Analog Input Module has 8 channels. The module includes Intrinsic Safety protection components on each channel for connection to process equipment in hazardous areas without the need for additional external devices. Each channel can be either a current input or power and monitor a two-wire process transmitter. The current input is for externally powered transmitters. The input voltage drop

ABB AI843 Analog Input, Redundant Or Single 1×8 Ch, ABB S800 I/O Description The AI843 Thermocouple/mV Input Module provides 8 differential input channels for Thermocouple/mV measurements. Measurement ranges configurable per channel are: -30 mV to +75 mV linear, or TC Types B, C, E, J, K, L, N, R, S, T and U. A separate Pt100 channel is used for “Cold Junction” (ambient) temperature measurements, thus serving as CJ-channel for Ch. 1...8. The junction temperature may be

ABB AI835 3BSE008520R1 Analog Input Redundant Power Supply Module Description The AI835/AI835A provides 8 differential input channels for Thermocouple/mV measurements. Measurement ranges configurable per channel are: -30 mV to +75 mV linear, or TC Types B, C, E, J, K, N, R, S and T, for AI835A also D, L and U. One of the channels (Channel 8) may be configured for “Cold Junction” (ambient) temperature measurements, thus serving as CJ-channel for Ch. 1...7. The junction

ABB AI825 3BSE036456R1 Analog Input 4 ch Redundant Power Supply Module Description The AI825 Analog Input Module has 4 individually galvanic isolated, bipolar current/voltage inputs. Each channel can be either a voltage or current input. The module has a direct current input that withstand up to 6.3 V and a over voltage protected current input that withstand up to +30 V d.c. The current is limited by a PTC resistor. Power to the input stages is converted from the 24 V on the

ABB 3BSE008544R1 Analog Input Termination Isolated Module AI820 Description The AI820 Analog Input Module has 4 differential, bipolar current/voltage inputs. Each channel can be either a voltage or current input. The current inputs can withstand an accidental maximum normal mode 30 V d.c. connection. To protect the current input circuit against dangerous input levels, that is, by accidentally connecting a 24 V source, the resistor rating of the 250W current sense resistors is

AI815 ABB - 3BSE052604R1 Input Output Termination Module Description The AI815 Analog Input Module has 8 channels. The modules can be configured for voltage or current inputs. Current and voltage signals cannot be mixed on the same I/O module. The voltage and current input is able to withstand an overvoltage or undervoltage of at least 11 V d.c. The input resistance for voltage input is greater than 10 M ohm, and the input resistance for current input is 250 ohm. The module

ABB 3BSE008516R1 Analog Input Output Termination Module AI810 Description The AI810 Analog Input Module has 8 channels. Each channel can be either a voltage or current input. The current input is able to handle a short circuit to the transmitter supply at least 30 V d.c without damage. Current limiting is performed with a PTC resistor. The input resistance of the current input is 250 ohm, PTC included. The voltage input is able to withstand an over or undervoltage of at least

ABB DO802 3BSE022364R1 Digital Output Relay 8 ch Redundant Power Supply Module Description The DO802 is an 8 channel 110 V d.c./250 V a.c. relay (NO) output module for the S800 I/O. The maximum voltage range is 250 V and the maximum continuous output current is 2 A. All outputs are individually isolated. Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components. The relay supply voltage supervisio

DO801 3BSE020510R1 ABB Digital Output Module Output 24V 16 ch Description The DO801 is a 16 channel 24 V digital output module for the S800 I/O. The output voltage range is 10 to 30 volt and the maximum continuous output current is 0.5 A. The outputs are protected against short circuits, over voltage and over temperature. The outputs are in one isolated group. Each output channel consists of a short circuit and over temperature protected high side driver, EMC protection

DI802 3BSE022360R1 ABB 8 Channel 120 V A.C./ D.C. Digital Input Module Description The DI802 is an 8 channel 120 V a.c./d.c. digital input module for the S800 I/O. This module has 8 digital inputs. The a.c. input voltage range is 77 - 130 volt and the input current is 10 mA at 120 V a.c. The d.c. input range is 75 - 145 V and the input current is 2.8 mA at 110 V. The inputs are individually isolated. Every input channel consists of current limiting components, EMC protection

Product Description: The YOKOGAWA PW482-10 is a perfect fit for industrial settings because of its durability and reliability. It is designed to withstand harsh environments and provide uninterrupted power to your devices. This power supply module is a necessary component of any industrial setup, as it ensures that your devices receive stable power, which is essential for their proper functioning. The YOKOGAWA PW482-10 is compatible with PAC8000 4-channel THC/mV input, 8105

Product Description: This power supply module is an ideal solution for those who require a reliable and efficient power source for their industrial devices. It is designed to be compatible with the PAC8000 4-channel THC/mV input, making it an excellent choice for those using this system. The YOKOGAWA PW482-10 power supply module is built to withstand harsh environments and can provide stable power to your devices even in extreme conditions. It features a robust construction

ABB DI801 3BSE020508R1 Digital Input 24V 16 ch Redundant Power Supply Module Description The DI801 is a 16 channel 24 V digital input module for the S800 I/O. This module has 16 digital inputs. The input voltage range is 18 to 30 volt d.c. and the input current is 6 mA at 24 V. The inputs are in one isolated group with sixteen channels and channel number sixteen can be used for voltage supervision input in the group. Every input channel consists of current limiting components

ABB 3BSE081637R1 PM866AK02 Redundant Processor Unit Central_Unit General Information Product ID: 3BSE081637R1 ABB Type Designation: PM866AK02 Catalog Description: PM866AK02 Redundant Processor Unit Long Description: 133MHz and 64MB. Package including: - 2 pcs PM866A, CPU - 2 pcs TP830, Baseplate - 2 pcs TB807, ModuleBus terminator - 1 pcs TK850, CEX-bus extension cable - 1 pcs TK851, RCU-Link cable - 2 pcs Battery for memory backup ( 4943013-6 ) - No license included.