Digital I O Module

ABB Board Input Bridge Cont AINP-01C SP Kit For Drive Code 68258529 64605658C Additional Information ABB Type Designation: AINP-01C Country of Origin: Finland (FI) Gross Weight: 0.5 kg Invoice Description: AINP-01C Made To Order: Yes Minimum Order Quantity: 1 piece Package Level 1 Units: 1 carton Part Type: New in Original box Product Name: Input Bridge Cont Product Net Weight: 0.5 kg Selling Unit of Measure:piece Related control circuit board as below: FS300R12KE3/AGDR-72C

GE IC693ACC300 PLCs from Series 90-30 A1 to A8 and from B1 to B8 10-slot baseplate Product information GE IC693ACC300 : The GE Fanuc IC693ACC300 input simulator module can be very important when the users need to develop or troubleshoot a PLC. The unit can supply 8 or 16 points or conditional input contacts in order to achieve manual control over the supported output devices. The unit is made for operation on DC voltage and it has an output voltage range of 18 to 30 Volts DC.

GE IC693MDL260 120 Volts AC and has 32 isolated input points organized in 4 different groups Product information GE IC693MDL260 : GE Fanuc IC693MDL260 module is installed in the Series 90-30 PLC system, the operators have control over the input filter times through the DIP switch, which is placed at the back of the module. It features an LED block on the top of the module for indicating the "ON" and "OFF" status of all 32 points. These indicators are numbered accordingly

GE IC693CPU311 16-bit system belonging to the 90-30 series of PLCs 10 MHz and a registry memory of 1 kilobyte Product information GE IC693CPU311 : Embedded CPUs have the following properties: The CPU type cannot be changed as it is soldered onto the backplane board in the baseplate. Embedded CPUs do not have a time-of-day clock. Since they lack expansion connectors like modular baseplates do, they do not support expansion or remote racks. If power supply is removed or battery

GE IC693CPU350 I/O system speciality module 4K I/O 32Kbytes user memory 0.22msec/K Product information GE IC693CPU350 : IC693CPU350 can also be adapted to a wide range of applications such as: digital interfaces (for push buttons, switches, proximity sensors, relays, contactors and many other devices), analog modules (with varying degrees of resolution for flow, temperature or pressure applications), direct connect wiring or remote termination and local or remote I/O systems.

GE IC693ALG223 RX3i Analog Current Input Module that offers 16 channels 90-30 Series Product information GE IC693ALG223 : The IC693ALG223 Module is a 16-channel analog current input module manufactured by GE Fanuc as part of the Series 90-30 product line. This module comes with 16 single-ended input channels that are designed to convert between different supported current ranges or to convert the analog signals to digital PLC signals. The module has an isolation voltage of

GE IC693MDL740 is a 12/24 positive logic DC output module 740 module 12/24 volts DC Product information GE IC693MDL740 : The IC693MDL740 module from the GE Fanuc Series 90-30 product line is a digital output module that runs on DC power. This output module also uses positive logic power. It has 16 output channels for connecting to up to 16 external devices at a time in a complete Series 90-30 controller setup. The 16 outputs are divided into 2 groups of 8 outputs each, and

AB 1747-PIC SLC 500 RS-232 to RS-485 Interface Converter 25-pin connector for interface pin-out Product information AB 1747-PIC : The 1747-PIC will only work with built-in COM1 and COM2 serial ports. It will not work with USB to serial adapters, serial port extender boards that add more COM ports or PCMCIA-format serial port cards, regardless of the operating system. Note: After you configure the 1747-PIC driver, you may get an error message that says that the ABPIC driver

AB 1747-L551 is 1 Amp at 5 Volts DC and 0 Amps at 24 Volts DC will give it up to 64K of backup memory capacity Product information AB 1746-IV32 : This module has a dielectric withstand of 150 Volts AC based on the UL 508, CSA C22.2 No. 142 Standards. The operating vibration of the 1747-L551 is 2.5G at 5 to 2000 Hertz. The non-operating vibration is 5G at 5 to 2000 Hertz. The isolation between the communication circuits of this module is around 500 Volts DC. The isolation

AB 1747-CP3 0.3 Watts at 5 Volts DC and 0.5 Watts at 2 Volts DC slot 0 of the SLC 500 chassis Product information AB 1747-CP3 : It provides all SLC 500 processors with a digitally converted thermocouple or millivolt (mV) analog data, received and stored in its image table. It does not require any external power supply as it receives 5 Volts DC and 24 Volts DC power from the SLC 500 power supply through its backplane. It has two cold-junction compensation (CJC) sensors instead

AB 1746-NT4 SLC 500 power supply 5 Volts DC and 0.5 Watts at 2 Volts DC 60 mA Product information AB 1746-NT4 : The Allen Bradley 1746-NT4 is a Thermocouple/mV Input Module for an SLC 500 system. It provides all SLC 500 processors with a digitally converted thermocouple or millivolt (mV) analog data, received and stored in its image table. It does not require any external power supply as it receives 5 Volts DC and 24 Volts DC power from the SLC 500 power supply through its

GE IC660BBD110 93-132VAC, 47-63 Hz 115VAC discrete input block Genius protocol Product information GE IC660BBD110 : The IC660BBD110 module measures 8.83” (22.44cm) x 3.34” (8.48cm) x 3.91” (9.93cm) (HxWxD) and weighs 4 lbs. (1.8 kg). It comes with LED indicators such as Unit OK, I/O enabled and individual input LEDs. It has internal isolation of 1500V from ground to serial bus. The IC660BBD110 connects to the Genius Bus via the terminal block installed below the module’s LED

GE IC220PWR101 POWER TERMINAL VERSAPOINT 108-135 VAC 8 AMP 1.5 Amperes maximum Product information GE IC220PWR101 : The GE Fanuc IC200PWR101 module is a power supply module from the Versamax series. It has an input voltage of 120/240 Volts AC and an output voltage of 5 Volts DC and 3.3 Volts DC. The GE Fanuc Versamax IC200PWR101 power supply module offers protection against overloading and short circuits. The total output current of the module should not exceed 1.5 Amps. If

GE IC200CHS003 I/O CARRIER VERSAMAX LOCAL CONNECTOR STYLE INTEGRATED TYPE VERTICAL ORIENTATION Product information GE IC200MDL640 : IC200CH003 is a connector-style carrier I/O manufactured by GE Fanuc automation. The IC200CH003 I/O carrier weighs 0.113 kilograms and comes with a 36-pin connector used for attaching an Input / Output cable. The carrier gives a provision for backplane communications, mounting as well as field wiring for one Input / Output module. You can locate

GE IC200MDL640 INPUT MODULE VERSAMAX 24V DC POSITIVE/NEGATIVE LOGIC 16 DISCRETE POINTS Product information GE IC200MDL640 : IC200MDL640 is a 24 VDC Positive Negative Logic Input Module with 16 Points manufactured by GE Fanuc for the VersaMax series. The IC200MDL640 provides two sets of 8 discrete inputs and 16 bits of discrete input data. Inputs in each set can be either positive logic or negative logic. Positive logic inputs receive current from input devices and return the

GE IC200MDD850 MIXED MODULE VERSAMAX DISCRETE 240 VAC INPUT 4 INPUTS / 8 OUTPUTS Product information GE IC200MDD850 : IC200MDD850 is a Mixed Output Relay from the VersaMax family of parts. This discrete module with both input and output capabilities provides four isolated discrete inputs with eight relay outputs. Inputs are positive logic or sourcing type as they get current from an AC input device and return currents on the common. This relay offers inputs with individual

ABB Digital I O Module AI801 Analog Input Module 3BSE020512R1 Voltage 10V General Information I Product ID: 3BSE020512R1 ABB Type Designation: AI801 Catalog Description: AI801 Analog input 1x8 ch, General Information II Type Analog Input Signal specification 0...20 mA, 4...20 mA Article number 3BSE020512R1 Number of channels 8 Signal type Unipolar single ended HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800L Introduction of Digital Input

AI810 Digital I O Module 3BSE008516R1 , AC Input Module 1x8 Channels 50V General Information AI810 Analog input 1x8 ch 0(4)..20mA, 0..10V, 12Bit, single ended, 0.1%, Rated isol. 50V Use Module Termination Unit TU810, TU812, TU814, TU830, TU835, TU838. Dimensions Product Net Weight: 0.19 kg Ordering Country of Origin: Estonia (EE) Customs Tariff Number: 85389091 I/O Station with S800 I/O Components - 8 AI channels Device Type Designator Function AI843 8 AI channels for

GE IC693CMM302 COMMUNICATIONS BETWEEN A SERIES 90-30 PLC AND UP TO 31 OTHER DEVICES Product information GE IC693CMM302 : The GE Fanuc IC693CMM302 is an Enhanced Genius Communications Module. It is quite commonly know as GCM+ for short. This unit is an intelligent module which enables automatic global data communications between any Series 90-30 PLC and up to a maximum of 31 other devices. This is done on a Genius bus. It is possible for the IC693CMM302 GCM+ to be installed on

AB 1746-NI4 512 microseconds 85 milliamps 16 bits 10 Hertz Analog I/O Module About 1746-NI4 : The Allen Bradley 1746-NI4 is an SLC 500 Four (4) Channel Analog Input Module. It has user-selectable analog channels for voltage or current to support multiple monitoring and control applications; it has a 16-bit resolution and contains a removable terminal block that provides connections analog input channel. This channel can be connected as a differential input. There is a DIP