ECG Leadwires

EKG leadwires are another important component of electrocardiography. Like ECG cables, they are used to transmit the electrical signals produced by the heart to the EKG machine.However, unlike ECG cables, EKG leadwires are typically used with disposable electrodes that are attached to the patient's skin. 1. Product Name : Mortara ECG Leadwires 9293-041-50, 9293-046-60 IEC 4.0 Banana EKG Leadwires 2. OEM Part Number Cross References: Mortara > Burdick : 9293-041-50, 9293-046

A 3-lead ECG machine uses three leadwires to measure electrical activity from three different points on the body: the right arm, the left arm, and the left leg (also known as the "ground" lead). 1.Product Name : S-iemens/Drager 5956359 MP03414 ECG Leadwire 5Lead ECG Detachable Cable 2.OEM Part Number Cross References: Manufacturer OEM Part # Draeger 5956359, MP03414 Fukuda Denshi CMO-07FT-5NAB Sage L09-05-29P, LM5-90P0 3.Compatibility: Manufacturer Model Arrow AutoCAT2 DRE ASM

ECG lead wires are essential devices that enable you to make proper connection to cardiology monitoring devices. These lead wires, which may be reusable or disposable, go hand-in-hand with ECG monitory equipment to produce accurate measurements of heart activity. These wires are also tested to ensure quality, reliable, and safe performance for users and patients. It is important to use the correct lead wires for any particular ECG device to ensure safety and proper results.

ECG Leadwire Products packing&transport&storage 1. Each ECG cable attaches labels on the line, reel to circular coil, fasten it, and then into the transparent self-styled plastic bags. 2. In general, put the packet products in outer packing boxes, and outside the plastic bag plus a bubble bag to prevent damaging product under pressure, outer packing is a carton. 3. Packaged products use the general transportation is available, transport process should be avoided in the sun,

ECG Leadwire Product advantages 1. The appearance size is strictly in accordance with the requirements of the design drawings, and the deviation is small within the allowable range. 2. The appearance of the ECG Lead wire is round and heavy, smooth and uniform in color, and the shell surface has no defects such as damage, scratches, and deformation; the surface of various plugs is smooth and flat, without burrs, no obvious mechanical damage, damage, and deformation, and the

Generic and Original M1625A P-hilips ECG LEADWIRE SET (989803104521). Shielded 5-Leadwires with Snap lead ends, Safety, AAMI. For use with M1520A Cable. P-hilips Compatible Models: 862474, 862475, 862478, 862483, 863063, 863064, 863065, 863066, 863068, 863077, M1001B, M1001B, M1724A, M2600A, M3000A, M3002A, M3535A, M3536A, M3536M, M4735A, M8102A, M8105A. 1. Product Name : P-Hilips M1625A 989803104521 ECG Lead Wires 6 Lead Cable IEC Clip MP 20 IntelliVue MX800 2. OEM Part

1. Product Name : Compatible for S-iemens Patient Cable ECG 5 Lead S-iemens IEC Grabber ECG Lead. 2. Compatibility: for Drager Infinity Delta, Infinity Delta XL, Infinity Kappa, Infinity Kappa XLT, Infinity Vista, Infinity Vista XL, SC 6000, SC 7000, SC 9000. 3.Technical Parameters Color Grey Connector Double Pin Patient End Conenctor Grabber Connector Standard IEC or AHA Length 100CM Leads 5Lead 4. Certificates 5. Company Introduction and products Shenzhen Best Electronics Co.

A disposable ECG leadwire is a type of leadwire that is designed to be used once and then discarded. It is often used in situations where there is a risk of contamination or infection, such as in emergency departments or surgical settings. 1.Product Name : S-iemens disposable ECG Leadwire - ECG Cable and Leadwires 2. Compatibility: It can be compatible for S-iemens 3. Certificates 4. Company Introduction and products Shenzhen Best Electronics Co.,Ltd (HongKong Best Medical

ECG Leadwires are usually clearly marked with color-coded grabs and snaps, making application quick and easy. Disposable ECG leads prevent potential cross-contamination between patients. Reusable ECG leads increase the efficiency of patient transfers, allowing patients to use a dedicated set of leads during their hospital stay, that is, if healthcare facilities were fully standardized. 1. Product Name : P-hilips M1978A M1976A 989803125881 ECG Leadwires 5 Lead Cable Lead wire

ECG Leadwires Product Advantages: 1. For adult, pediatric and neonate patients; 2. Meeting the requirements of CE/ISO 13485; 3. Integratedmolding with flexibility, seamless connection and dustproof design; 4. Flexible and durable cables, enduring repeated cleaning and disinfection; 5. Outstanding shielding property and anti-interference performance, protecting ECG signal from being interfered; 6. Use different color cable to indicate the corresponding use lead wires position,

FEATURES S-iemens Drager Compatible ECG leadwires are available in 3 and 5 lead configurations. Leadwires are electrically shielded to protect ECG signal integrity. 1. Product Name : S-iemens Drager ECG Lead Wire Leadwires 5956359 MP03414 Set 5 Lead Grabber Clip to Dual 5 Pin Connector 2. OEM Part Number Cross References: Manufacturer OEM Part # Draeger 5956359, MP03414 Fukuda Denshi CMO-07FT-5NAB Sage L09-05-29P, LM5-90P0 3. Compatibility: Manufacturer Model Arrow AutoCAT2

1.Product Name : P-hilips Compatible ECG Leadwire - M1968A ECG Cable and Leadwires 2.OEM Part Number Cross References: P-hilips : M1968A,989803125841 3.Compatibility: P-hilips: 43100A, 43110A, 43120A, 78352C, 78354C, 78834C, 862474 C3, Affiniti 30, Affiniti 50, Affiniti 70, Affiniti CVx, Agilent, Agilent 50XM, CX50, EPIQ, EPIQ 7, Envisor, HD15, MRx, , IE33, IntelliVue, IntelliVue MX500, IntelliVue MX750, IntelliVue MX800, IntelliVue MX850, M1001A, M1002A,

5 lead Set, disposable, for single patient use, to measure bedside ECG. AAMI color coded grabbers. Round peelable ribbon style wires. Wire length: 3,3ft (1m). For use with trunk cables: M1668A, M1663A and M1949A.1 Sales Unit = 20 single wrapped lead sets. 1. Product Name : P-hilips 989803174211 989803173131 Disposable ECG Leadwires Set 5 Lead Grabber Clip Din DG style IEC 2. OEM Part Number Cross References: Manufacturer OEM Part # 3M 70200762915 (4 ft 50¨) (YMDLW5P) AMC LW

ECG leadwires are designed to be durable and long-lasting, and are made from materials that are safe for use on the skin. Proper care and maintenance of ECG leadwires is important to ensure accurate readings and to prevent damage to the device. 1. Product Name : OEM P-hilips 5+5 ECG Leadwires IEC 4.0 Banana EKG Leadwires 2 . Compatibility: Compatible for PH 78352C, 78354C, 78834C, MRx, IntelliVue, IntelliVue MP2, IntelliVue MP5, M1001A, M1001B, M1002A, M1002B,

Typically 10 ECG leadwires used for a standard ECG test, with six chest leads and four limb leads. The chest leads are placed on the patient's chest in specific locations, while the limb leads are placed on the patient's arms and legs. The leadwires are color-coded to help medical professionals correctly place them on the patient's body. 1. Product Name : P-hilips 4+6 Leadwires IEC 4.0 Banana EKG Leadwires 2. Compatibility: Compatible for PH 43100A, 43110A, 43120A, 78352C,

1. Product Name : P-hilips Trim ECG Leadwires 989803129161 IEC 4.0 Banana EKG Leadwires 2. OEM Part Number Cross References: P-hilips : 989803129161, M1713B, M1702A, 989803129141 (2 limb leads), 989803129151 (3 chest leads), M1700 - 69501 Sage :L01-10-MSB Sonosite :32027700 3. Compatibility: P-hilips:CardioDynamics BioZ, M1701A, PageWriter PIM module - 989803130091, PageWriter PIM module - 989803130101, PageWriter TC70, PageWriter Trim I, PageWriter Trim II, PageWriter Trim

ECG leadwires are a vital component of ECG testing, and proper use and maintenance of these devices is necessary for accurate and reliable results. 1. Product Name : P-hilips TC30/50 ECG Leadwires 989803151651 2. OEM Part Number Cross References: P-hilips:989803151631 (4 mm banana leads diameter), 989803151671 (Chest lead set 1 in 3 Trident lead), 989803151651 (2 long arm leads 54" (1.37m) 2 long leg leads 56" (1.42m) 2 long 1 into 3 Trident leads 42" (1.07m)) 3. Compatibility:

1. Product Name : P-hilips Trim ECG Leadwires 989803129161 IEC 4.0 Banana EKG Leadwires 2. OEM Part Number Cross References: P-hilips : 989803129161, M1713B, M1702A, 989803129141 (2 limb leads), 989803129151 (3 chest leads), M1700 - 69501 Sage :L01-10-MSB Sonosite :32027700 3. Compatibility: P-hilips:CardioDynamics BioZ, M1701A, PageWriter PIM module - 989803130091, PageWriter PIM module - 989803130101, PageWriter TC70, PageWriter Trim I, PageWriter Trim II, PageWriter Trim

1. Product Name : MS14682 ECG Cable Draeger ECG Single Pin Monolead 6Lead Leadwires IEC Snap 2. OEM Part Number Cross References: Manufacturer OEM Part # Draeger MS14682 3. Compatibility: Draeger machine 4.Technical Parameters Color Grey Patient End Conenctor Snap Standard IEC or AHA Lead Cable Diameter 2.6mm Leads 3 / 5/ 6 Lead Connector Distal Single Pin 5. Our Exhibitons 6. Company Introduction and products Shenzhen Best Electronics Co.,Ltd (HongKong Best Medical Group Co.

1. Product Name : Reusable ECG Leadwires Drager Sie-mens Monolead 3Lead IEC Snap MS14555 ECG Leadwires 2. OEM Part Number Cross References: Manufacturer OEM Part # Draeger MS14555 3. Compatibility: Sie-mens Drager machine 4.Technical Parameters Color Grey Patient End Conenctor Snap Standard IEC or AHA Lead Cable Diameter 2.6mm Leads 3 / 5/6 Lead Connector Distal Single Pin 5. Certificates 6. Company Introduction and products Shenzhen Best Electronics Co.,Ltd (HongKong Best