Stainless Steel Pipe Fittings

BW SS316 stainless Steel Pipe Fittings 45deg Elbow with ISO9001 Brief Introduction The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe. The function of a 45° elbow is the same as a 90° elbow, but the measurement of dimensions is different to that of the 90° elbow. The radius of a 45° elbow is the same as the

stainles steel pipe Elbows: Such pipe fittings are used to change the direction of the flow. Elbows They are majorly available in two standard types - 90 and 45 degree angles owing to their high demand in plumbing. The 90-degree elbow is primarily used to connect hoses to water pumps, valves, and deck drains, while the 45 degree elbow is mostly used in water supply facilities, electronic and chemical industrial pipeline networks, food, air-conditioning pipelines, garden

Seamless BW Stainless Steel Pipe Fittings with material SS316 Brief Introduction Seamless stainless steel pipe fittings are integrally formed, and after multiple cold rolling and acid washing, their surface is relatively smooth and their corrosion resistance is better. Seamless stainless steel pipe fittings are widely used in high-pressure, high-temperature, and low-temperature environments, such as aviation, aerospace, marine engineering, medical equipment, and other fields

Polished SS316 Stainless Steel Pipe Fitting Equal Tee For Sanitary Brief Introduction Polished stainless steel pipes fittings have a wide range of applications and advantages, suitable for fields such as building decoration, food industry, chemical industry, petroleum and natural gas industry, automotive industry, medical equipment, etc. Its strong corrosion resistance, high surface finish, high strength, good temperature adaptability, easy processing, environmental

Polished SS304 Welded Stainless Steel Pipe Fitting For Food Industry Brief Introduction The stainless steel polished eblow: The polished steel pipe fittings will have a very smooth appearance, making it easier to clean and maintain, and the surface of the polished steel pipe fittings will form an invisible protective film, which can prevent corrosion and scaling on the surface of the pipe. The overall service life will be longer than that of the unpolished 304/316 pipe. After

Sch10s Sch40s Stainless Steel Pipe Fittings 180 Deg Bends For Chemcial Industry Brief Introduction Stainles steel pipe eblow: 180 degree elbow is like 45 or 90 degree elbow,but the flow direction change is 180 degree.It looks like the flow fluid get back to the same direction from the joint. The shape is like two 90 degree elbows welded together.It is also called “U bend” or “return bend”. Products Information/Specification: Products Name Butt-Welding Stainless steel seamless

SS316 304 321 201 Stainless Steel Pipe Fittings Cross Tee With SCH40S SCH10s Brief Introduction Stainless Steel Pipefittings: The ASME/ANSI B16.9 specification covers the dimensions and the tolerances of carbon and alloy butt weld fittings. The MSS-SP 43 specification integrates ASME B16.9 to cover stainless steel and nickel alloy pipe fittings. In this article, we show the dimensions and weights of buttweld elbows, tees, and reducers. Tolerances of butt weld fittings (in

SS304 316 Stainless steel pipe fittings stub ends collar with EN1092-1 EN1092-1 TYPE 35 STUB ENDS COLLAR Lap joint stub end is a fitting that is used replace welded flanges when the support of a rotating back up flange is required. And It can be supplied in standard and non-standard ANSI/DIN dimension that is used for connecting pipes of different diameter. Stub ends are usually manufactured in two ways, Type A and Type B. They are available in two standard length, long (ANSI

ANSI short type Stainless Steel Pipe Fitting stub ends with ANSI B16.9 Brief Introduction Stainless steel stub ends: The main function of stub end is to connect pipes together in a piping system along with a stainless steel lap joint flange/backing flange. The stainless steel stub ends are used in conjunction with stainless steel lap joint flanges/backing flanges. Stub ends Type A and Type B. They are available in two standard lengths, long (ANSI) or short pattern (MSS).

ANSI short type Stainless Steel Pipe Fitting stub ends with ANSI B16.9 Stub Ends: Lap joint stub end is a fitting that is used replace welded flanges when the support of a rotating back up flange is required. And It can be supplied in standard and non-standard ANSI dimension that is used for connecting pipes of different diameter. Stub end are offered in three different ways, type A, B and C. the most common type is Type A: The type A stub end is used for standard lap joint

SS304 SS321 SS316 Stainless Steel Pipe Fittings Concentric Reducer with Seamless and welded type Brief Introduction A buttweld fitting is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. Forged Steel buttweld fittings are manufactured in accordance with ANSI / ASME B16.9. Butt weld fittings are available as elbows, tees, caps, reducers and out lets (olets). Buttweld fittings use seamless or

Seamless Or Welded SS Stainless Steel Pipe Fittings Equal Tee With SCH10S SCH40 SCH80S Brief Introduction Butt Welded pipe fittings in carbon steel and stainless steel are the joining components that make possible the assembly of valves, pipes and equipment onto the piping system,Common material for butt weld fittings are A234 WPB, High Yield Carbon Steel, Stainless Steel 304 and 316 and Nickel Alloys. The key specifications for buttweld fittings are the ASME B16.9 (carbon

BW Smls Seamless Stainless Steel Pipe Fittings 22.5DEG Elbow For PN16 PN25 PN40 Pipeline Brief Introduction Buttweld fittings are pipe fittings used to change the pathway of a pipeline (elbows), reduce/increase the pipe bore size (reducers), branch (tees, cross) or blind a pipeline (butt weld cap); Buttweld fittings are available in multiple shapes (elbows, tees, reducers, crosses, caps, stub ends), material grades (carbon, high-yield carbon, low-alloy, stainless, duplex, and

Stainless steel Caps: Steel Pipe Cap is also called Steel Plug, it usually welded to the pipe end to close the pipeline, so the function is the same as the pipe plug. Ranges from material types, there are: Carbon steel pipe cap, Stainless steel cap, Alloy steel cap. with pipe thickness SCH5SM 10SM 20SM 40SM 80S, 160S. XXS. Products Information/Specification: Products Name Butt-Welding Stainless steel seamless and welded Pipe Fitting with standard ANSI B16.9 Types Caps,Con.

Duplex SS SAF2507 Stainless Steel PipeFittings With Sch40s SCH80S, SCH160S Stainless Steel con. /Ecc. Reducer: This pipe setting is used to reduce the flow size of the pipe from the bigger to smaller one. There are two kinds of reducers- concentric reducer and eccentric reducer. Reducer The former one is in the shape of a cone used for gradual reducing of the size of the pipe. The latter one has its one edge facing the mouth of the connecting pipe reducing the chances of air

SCH10S SCH40S SCH80S Stainless Steel Pipe Fittings For Chemdical Oil Stainless steel pipe tee: 4-way cross pipe fittings are used to connect pipes and change or control flow through a piping system. Cross pipe fittings may stress pipes as temperatures change due to their four-way nature. Because of this, pipe crosses are generally not used as plumbing hydraulic components. The details Specification as below: Products Name ANSI B16.9 BW SS Smsl seamless and welded Pipe Fitting

stainless steel straight Tee,This T-shaped pipe fitting used in the plumbing tee system has one inlet and two outlets arranged at an angle of 90 degrees to the main pipe. This kind of fitting is used to connect the two pipes and make their flow direction as one. If all the three sides of this fitting are same in size, it is called equal tee, otherwise unequal tee. Products Information/Specification: Products Name duplex SS SDSS Butt-Welding Stainless steel seamless and welded

ANSI SCH10S SS304 Stainless Steel Pipe Fittings for chemical plant Round Cap Sch5S, 10S, 40S, 80S , Seamless Welded 304/L 316/L Stainless Steel Conforming to ASTM A403,ANSI B16.9, ANSI B16.28 and MSS SP-43 BS EN 10204 3.1 Certificates available on request Suitable applications: Hot and Cold Water, Oil, Gas and other medium Products Information/Specification: Products Name Butt-Welding Stainless steel seamless and welded Pipe Fitting with standard ANSI B16.9 Types Caps,Con.

ASME Butt Welded Steel Stainless Steel Pipe Fitting B16.9 Butt welding is when two pieces of metal are placed end-to-end without overlap and then welded along the joint (as opposed to lap joint weld, where one piece of metal is laid on top of the other, or plug welding, where one piece of metal is inserted into the other). Importantly, in a butt joint, the surfaces of the workpieces being joined are on the same plane and the weld metal remains within the planes of the

Polished SS316 Stainless Steel Pipe Fitting Equal Tee For Sanitary brief introduction Polished stainless steel Tee: The polished stainless steel pipefittings has a smooth surface, free from any impurities, sand holes, exposed welds, and no resistance obstacles. Suitable for food industry, building decoration, chemical industry, automotive industry, medical equipment, and household products The details Specification as below: Products Name ANSI B16.9 BW SS seamless and welded