Fetal Monitor Parts

Avalon FM20 / FM30 Network Card Specifications 1. Part Information Network Card Part No.: M2703-67001 Alternative No.: 9001-18481C00A Hardware Type: Built-in PCI expansion card Applicable Models: Philip Avalon FM20 (M2702A), FM30 (M2703A) 2. Ethernet Specifications Interface: RJ45 port Speed: 10/100 Mbps auto-negotiation Network Protocol: TCP/IP (IPv4), DHCP / BOOTP Standard Compliance: IEEE P1073 Medical Information Bus (MIB) Transmission Mode: Unicast / Broadcast System

Philip FM20 FM30 FETAL MONITOR NIBP SPO2 SOFTWARE UPGRAD Philip Avalon FM20 / FM30 Fetal & Maternal Monitor (English Technical Specifications) 1. General Information Item FM20 (M2702A) FM30 (M2703A) Type External fetal/maternal monitor External + internal fetal/maternal monitor Application Antenatal / intrapartum, basic monitoring Antenatal / intrapartum, complex high-risk cases Display 6.5” color TFT touchscreen 6.5” color TFT touchscreen Dimensions (W×H×D) 286 × 133 × 335

Avalon FM20/FM30/FM40/FM50 M2735A M2724B M2736A US & TOCO Philip Fetal Probe 2734B:M2734-60501 M2735A:M2735-60501 M2736A:M2736-60501 1. M2734B TOCO MP Transducer Function: Uterine contraction monitoring + maternal pulse detection Part Number: M2734B / 453564435211 Connector: 8-pin D-type with red key Diameter: 83 mm Weight: Approx. 0.2 kg Ingress Protection: IP68, waterproof to 1m for 5 hours Safety Classification: Type CF, defibrillation-proof Operating Temperature: 0–40 °C

Philip Avalon FM20/FM30 Interface Board (P/N: M2703-26420 / M2703-66420) Also known as: Connector Board / Jack Board / Adapter Board 1. Basic Information Official Part Number: M2703-26420 (also referenced as M2703-66420) Compatible Devices: Philip Avalon FM20 (M2702A), FM30 (M2703A) Fetal Monitors Function: Front-end I/O interface & signal switching board; routes transducer signals to mainboard Board Dimensions: ~190 mm × 85 mm PCB Layers: 4-layer, medical-grade FR-4 2.

M2705-66510 /M2703-66450 Philip FM20 FM30 FETAL MONITOR MAINBOARD 1. Main CPU Board (Mainboard Core) Part Number: M2703-66450 (also referenced as M2705-66510) CPU Core: 32-bit embedded RISC processor (medical-grade, real-time OS) Clock Speed: 200 MHz (typical) Memory: Flash: 128 MB (firmware, calibration, user presets) RAM: 64 MB (real-time data, waveforms, trend buffers) Data Storage: 72-hour fetal/maternal trend data; 800 NIBP records Embedded OS: Philip proprietary real

Philip Avalon FM20 / FM30 Thermal Printhead (TLPH) (Original Philip, for M2702A / M2703A) 1. Basic Information Official Name: Thermal Line Printhead (TLPH) Compatible Models: Avalon FM20, FM30 (M2702A, M2703A) Printer Type: 6-inch thermal array recorder Part Number (Original): 4522 991 25291 (assembly) 2. Optical / Printing Resolution Dot Density: 8 dots/mm (203.2 dpi) Effective Print Width: 150 mm (full paper width) Total Dots: 1200 dots (150 mm × 8 dots/mm) Dot Pitch: 0.125

Philip Goldway CTG7 fetal monitor 1. General Information Model: Philip Goldway CTG7 Device Type: Combined fetal and maternal monitor Display: 7-inch TFT color LCD, 800×480 WVGA, 0–90° adjustable angle Operation: Navigation knob + backlit keys, integrated probe holder & carry handle Recorder: 150 mm width thermal printer; paper speed: 1 / 2 / 3 cm/min Data Storage: 72-hour trend review and printing; 800 sets of NIBP data storage Twin Pregnancy: Optional twin monitoring with

PN:451261010401 / M2703-60004 Philip Avalon FM20 / FM30 Fetal Monitor – Recorder Stepper Motor 2. Electrical & Mechanical Specifications Motor Type: 2-phase, 4-wire stepper motor Operating Voltage: DC 12 V (internal monitor supply) Gear Ratio: 5:1 (N37 gearbox) Step Angle: 7.5°/step (after gear reduction: 1.5°/step) Rated Current/Phase: 0.67 A Phase Resistance: 5.6 Ω Phase Inductance: 4.2 mH Holding Torque: 8.3 kg-cm (≈0.81 N·m) Output Shaft: D-shaft (fits paper roller) No

PN:453564150521 FM20 FM30 LCD SCREEN PART Basic Information Touch Screen: 4‑wire resistive touch panel Integrated Parts: LCD panel + touchscreen + backlight inverter + display adapter board (M2703‑66440) Main Connection: 50‑pin ribbon cable to recorder adapter board (M2703‑66430) Interface: 5‑wire touch connector; standard power/signal cables Mounting: Original housing fit, direct replacement Functions Primary user interface for FM20/FM30 Displays fetal/maternal vital signs,

Philip FM20 LCD COMPLETE PART M2703‑64503 PN:453564150521 1. OEM Part Numbers & Compatibility OEM Display Assembly Part Numbers: Standard non-touch: M2703‑64503 Capacitive touchscreen version: 453564150521 Compatible Monitors: Philip Avalon FM20, FM30 Fetal Monitors Type: 6.5-inch TFT Color LCD Display Module, foldable/tiltable mount, wide‑viewing angle design 2. Core Display Specifications Screen Size: 6.5 inches (diagonal, 16.51 cm), 4:3 standard medical aspect ratio

Philip Avalon FM20 / FM30 Fetal Monitor Network Card (LAN Interface) Parameters Basic Information Model: Philip Avalon FM20 (M2702A), FM30 (M2703A) LAN Interface Type: Optional integrated LAN/RS232 system interface module (Option J70, Part No. M2703-67501) Interface Standard: 10BASE-T Ethernet (IEEE 802.3) Speed & Duplex: 10 Mbps, Half-Duplex only (no auto-negotiation, no 100 Mbps support) Port: RJ45 female connector (rear panel) Network Configuration IP Address Assignment:

Philip M2734B TOCO MP Transducer (TOCO Probe) – Full English Specifications Basic Information Model: M2734B (Avalon TOCO MP Transducer) Type: Fetal TOCO (Tocodynamometer) + Maternal Pulse Transducer (Wired) Manufacturer: Philip Healthcare Part Number: HC989803170601 Compatibility: Philip Avalon FM20, FM30, FM40, FM50 Fetal Monitors; IntelliSpace Perinatal Systems Certifications: CE, FDA, ISO 13485 Latex‑Free: Yes Core Measurement Parameters Uterine Contraction (TOCO)

TOCO+ MP Philip Avalon FM20 FM30 Fetal Monitor Wireless Fetal Monitoring Probe REF 866075 Descripition: Philip Avalon FM20 FM30 Fetal Monitor Wireless Fetal Monitoring Probe TOCO+ MP REF 866075 Philip Avalon FM20 FM30 Fetal Monitor Repair parts in stock:Motherboard, printhead, display, M2734B, M2736A, M2735A, TOCO+ MP, marker, cable, etc. Monitoring maintenance: Service brand: GE,PHILIP,Mindray,,TYCO,etc. Maintenance type:Electrocardiograph monitor, defibrillator, oximeter,

Description:Philip Patient Monitor FM20 /FM30 fetal monitors utilize printer motor Monitoring maintenance Project advantages: 1. professional chip Engineer - with more than 15 years of field maintenance experience. 2.There are enough market mainstream brand type monitoring equipment maintenance accessories to send spare machine. 3. More than 90% of failures (software and hardware) of MP series monitor modules have been solved, and more than 600 M3001A modules are maintained