Hydraulic Piston Seals

Single Acting Piston Seal With Cut Lip Design For Use In Hydraulic Applications And Supplying Thin Oil Fim KL33 is a single acting piston seal with cut lip design for use in hydraulic applications and supplying thin oil fim. Advantages • Superior static and dynamic sealing effect • Wide range of dimensions • Easy installation into closed grooves • Economical sealing solution • Simple design suitable with many standard cylinders Area of Application • Agricultural machinery •

Hydraulic sealing systems for earth moving/construction machinery, agriculture machinery, agricultural/forestry machinery,material handling, industrial hydraulics, vehicle engineering and mining. The rod seals is the most critical seal on any type of fluid power equipment preventing leakage of fluid from within the cylinder to the outsise. Leakage through the rod seal can reduce equipment performance, and also in extreme cases can cause environmental issue. Piston seals or

Single Acting Piston Seal Set With Thermoplastic Header Ring, Fabric Elastomer Intermediate Ring And Backup Ring. KL26 single acting piston seal set consists of thermoplastic header ring, fabric elastomer intermediate ring and fabric elastomer backup ring. Advantages • High wear resistance • Superior sealing performance in heavy duty applications • Long service life • Thin oil film • Suitable design for locking applications Area of Application • Mining industry • Iron and

K02-R Overview Same cross-sectional shape as K02-P. With self-adjusting rectangular retaining ring. The materials have been optimised for chemical and thermal resistance. Temperature (max) °C : -50～+200 Pressure (max) Bar : 250 Sliding Speed (max)- M/s: 0.5 Application: Backwards and forwards action (e.g. of piston or pump) K02-RD Overview Same cross-section shape as K02-PD. With self-adjusting conical retaining ring. The material has been optimised for chemical and heat

PSZ Purpose and performance: Suitable for hydraulic cylinder sealing of heavy machinery and metallurgical equipment, with strong pressure resistance and corrosion resistance, good thermal conductivity, anti-distortion structure, low friction, No crawling. Working conditions: Temperature range: -60~+280℃ Working speed: 5m/s Working pressure: 60Mpa Media: general hydraulic oil, petroleum-based hydraulic oil, oil-in-water emulsion (HFA, HFB), water glycol (HFC), biodegradable

PGZ Purpose and performance: PGZ is suitable for hydraulic cylinder sealing of heavy machinery and metallurgical equipment. It has strong pressure resistance and corrosion resistance, good thermal conductivity, anti-distortion mechanism, low friction and no creeping phenomenon. Working conditions: Temperature range: -60~+280℃ Working speed: 5m/s Working pressure: 60Mpa Media: general hydraulic oil, petroleum-based hydraulic oil, oil-in-water emulsion (HFA, HFB), water glycol

1. Product description Hot Sale Low Prices Customized Pu Oil Seal Packing Seals Hydraulic Piston Rod Seal Material Type: PU Temperature-40℃~+90℃ Place of Origin: shannxi, China ColorBlue, Yellow, Green Pressure: 40MPA 2,WE CAN PROVIDE On-time Delivery Exceptional Quality Acceptable Customization Competitive Pricing Material Types and General Properties Material types and general properties Item Type Temp.R ange("C) Property High Temp.R Low Temp.R ACM 150 -10 It is used in

Double Acting Compact Seal Sets For Working At High And Variable Pressures In Heavy Duty Applications KL36 is a five piece double acting compact seal which consists of elastomeric sealing element, thermoplastic elastomer backup rings and thermoplastic guide rings. It is designed for working at high and variable pressures in heavy duty applications. Advantages • Effective sealing during vibration and shock loading • High extrusion resistance at high pressures • High sealing

1. Product introduction Manufacturer Customized U601 U603 Hydraulic Jack Oil Seal Polyurethane UN PU Piston Rod Seals for cylinders Description of design. KLHPS-01 is a high-performance single-acting U-rod or piston all-purpose seal that provides the driest seal in light - and medium-load applications. The seals are injection molded with KELONG high performance U5203 material,easy to install and excellent low temperature resistance.When used in conjunction with a full

Overview Asymmetric piston seals for standard applications. Provides good sealing results over a wide wide range to provide good sealing results.Resistant to Good pressure resistance. Back-to-back installation for dual-action pistons. Temperature (max) °C : -50～+110 Pressure (max) Bar : 400 Sliding Speed (max)- M/s: 0.5 Application: Backwards and forwards action (e.g. of piston or pump)

Overview Asymmetric piston seals for standard applications. Contact High stress, can be used for single acting piston seals. Temperature (max) °C : -50～+110 Pressure (max) Bar : 400 Sliding Speed (max)- M/s: 0.5 Application: Backwards and forwards action (e.g. of piston or pump)

K01-R Overview Asymmetric piston seals for standard applications. Provides good sealing results over a wide range to provide good sealing results. Resistant to Good pressure resistance. Back-to-back installation for dual-action pistons. Temperature (max) °C : -60～+200 Pressure (max) Bar : 160 Sliding Speed (max)- M/s: 0.5 Application: Backwards and forwards action (e.g. of piston or pump) K01-RE Overview Asymmetric piston seals for standard applications. Contact High stress,

K02-P Overview Asymmetric piston seals for standard applications, based on the K01-P design. With self-adjusting rectangular retaining ring. Can be used for higher pressures and larger extrusion gaps. Temperature (max) °C : -40～+110 Pressure (max) Bar : 700 Sliding Speed (max)- M/s: 0.5 Application: Backwards and forwards action (e.g. of piston or pump) K02-PD Overview Asymmetric piston seals for standard applications, based on the K01-P design. With self-adjusting conical

K03-P Overview O-ring preloaded, asymmetric piston seals. Can accommodate a wide temperature range. Particularly suitable for applications with large bias loads, with better pressure retention. Temperature (max) °C : -50～+100 Pressure (max) Bar : 400 Sliding Speed (max)- M/s: 0.5 Application: Backwards and forwards action (e.g. of piston or pump) Stationary state

K03-F Overview O-ring preloaded, asymmetric PTFE piston seal. The design is optimized for FKM material in order to minimize friction and stick-slip effects. Can be adapted to a wide wide temperature range. Adaptation to different temperatures and temperature ranges can be achieved by selecting the appropriate O-ring material. ring material to suit different temperatures and media. Almost no hygienic dead space, easy to clean. virtually no hygienic dead space, easy to clean.

K03-S Overview Helicoil spring preloaded, asymmetric PTFE piston seals. Optimized design for FKM materials to reduce friction and stick-slip effects. Excellent chemical and heat resistance, primarily used for bonnets, seats and stems. Temperature (max) °C : -200～+260 Pressure (max) Bar : 200 / 400 Sliding Speed (max)- M/s: 0.5 / 1 Application: Backwards and forwards action (e.g. of piston or pump) Stationary state

AQ Purpose and performance: AQ is suitable for working conditions with fast speed, high pressure and pressure maintenance. Recommended for double-acting pistons such as piston accumulators, support cylinders and positioning cylinders. It has the dual safety of low friction and high elasticity, good dynamic and static sealing performance, allows a large extrusion gap, and has a pressure maintaining function with small leakage in the cylinder. The groove is simple, the

AQ5 Purpose and performance: AQ5 is suitable for working conditions with fast speed, high pressure and pressure maintenance. Can be used with piston accumulators, clamping cylinders and positioning cylinders, especially recommended for heavy duty and large diameter applications. It has the dual security of low friction and high elasticity, low gas permeability, good sliding performance in high-pressure applications, no crawling phenomenon, simple groove structure, and easy

FOP Purpose and performance: FOP is a one-way sealing ring composed of a stainless steel V-type (0-type) spring anda filled PTFE U-ring. It is used in slow, medium-speed reciprocating or slow-speed rotating motion situations, including hydraulic cylinders and air cylinders. It has a variety of different shapes and structures and a wide sealing pressure range. From vacuum to zero pressure and ultra-high pressure, reliable sealing requirements can be guaranteed. For low

FOP Purpose and performance: FP is a one-way sealing ring composed of a stainless steel V-shaped (0-shaped) spring and a filled PTFE U-shaped ring. It is used for slow, medium-speed reciprocating or slow-speed rotating motion situations, including hydraulic cylinders and air cylinders. It has a variety of different shapes and structures and a wide sealing pressure range, from vacuum to zero pressure and ultra-high pressure, which can ensure reliable sealing requirements. For