Road Construction Material

Self‑adhesive Mesh Crack Patch is used for asphalt & concrete pavement crack repair. Select matching size according to crack width. Thoroughly clean the crack surface, remove dirt, oil stains and loose gravel. Peel off the release film, lay the patch flat over cracks. Install when surface temperature above 15℃; apply adhesive or heat pavement for low‑temperature construction. Cut to fit irregular cracks. Compact tightly to eliminate air bubbles and wrinkles for full adhesion.

Non‑carrier joint sealing tape is self‑adhesive asphalt crack repair tape for asphalt pavement cracks. Before application, thoroughly clean and dry crack surfaces. Temporary edge lifting may happen from moisture or temperature change, which will disappear after vehicle compaction. Choose proper grade matching local ambient temperature for best sealing performance. No. Test Item Technical Requirement 1 Width (cm) 4, 5, custommade 2 Thickness (mm) 2.04.0 3 Penetration (0.1 mm

Our hot‑melt road crack sealant comes in five temperature‑resistant grades from Type‑I to Type‑V, adaptable for‑0℃ to‑40‑degree‑cold‑region pavement maintenance.Made from modified‑asphalt raw‑material, it features stable penetration, good compression‑resilience recovery, proper high‑temperature viscosity and reliable anti‑aging performance.The standard construction workflow includes grooving, crack cleaning, crack pre‑heating, hot pouring at 193℃ and 15‑minute cooling curing.

Model RO-GLR6A Max Capacitance 37kWh Rotation Speed of Emulsifier 2930rpm Power of Mill 22kW Thermal oil Heating Power 9kWh Power of Burner 10×104kcal/h Heat Transfer Area 15m2 Fineness of Emulsified Asphalt ＜5μm Water tank volume 3 m3 (1 tank) Emulsion tank volume 1.5 m3 (2 tanks) Productivity 6t/h Weight 3750kg Overall Dimensions 4700×2150×2230mm (L×W×H)