Pick And Place Machine

JUKI SMT RS-1R Pick And Place Machine Fast Smart Modular Mounter Features: JUKI automation system JUKI SMT pick and place machine, PCB chip shooter, SMT chip mounter, SMD placement, SMT pick & place machine, compact modular chip mounter, multi-functional pick n place machine, high speed LED SMT pick and place machine manufacturer, for SMT smart factory. 01 Class leading speed, up to 47,000 cph Maximum speed of up to 47,000 cph*. This is made possible by a revolutionary head

Features: Productivity On the Fly mounting method Identifies components without stopping while moving after picking them up Dramatically reduces travel time between the pick and place position and reduces identification time to zero Performance Dual-lane traveling track Double track production method significantly increases the capacity of small boards and ensures scalability for large boards with a traveling track 02 Reliability Monitoring of components before and after

Features: As a general component placer whose vision system is reinforced based on the platform of the SM471 high speed chip shooter and whose chip placement speed is the highest among the same class component placers, the SM481 realized achip placement speed of 38,000 CPH, the highest among the same class component placers, by applying a head with one gantry and ten spindles as well as new flying vision and by maximizing the pickup and placement motion. As a general

Features: Efficient production in made possible via upstream data sharing to square bad mark propagation, component supply management while showing real-time status of the production line. Communicates and shares information with other equipment Bad mark information of the circuit detected by the inspection machine or a machine upstream of the line can be propagated to the RX-8 in order to reduce the bad mark recognition timed and imporve productivity. 01 1.High-speed

Features: JUKI automation system JUKI SMT pick and place machine, PCB chip shooter, SMT chip mounter, SMD placement, SMT pick & place machine, compact modular chip mounter, multi-functional pick n place machine, high speed LED SMT pick and place machine manufacturer, for SMT smart factory. 01 Class leading speed, up to 47,000 cph Maximum speed of up to 47,000 cph*. This is made possible by a revolutionary head design that reduces the travel time and distance for every

Features: As a general component placer whose vision system is reinforced based on the platform of the SM471 high speed chip shooter and whose chip placement speed is the highest among the same class component placers, the SM481 realized achip placement speed of 38,000 CPH, the highest among the same class component placers, by applying a head with one gantry and ten spindles as well as new flying vision and by maximizing the pickup and placement motion.

Features: 1.High-speed mounting capacity of 25000 CPH (0.14 seconds/CHIP) 2.Up to 96 types of feeders can be installed (72 with sATS), with the option of installing FNC/SF models 3.Corresponding components 0402-5 * 45mm-L100mm, capable of supporting a height of H15mm Model YS100 (Model: KJJ-000) Applicable PCB (mm) L50 x W50 to L700 x W460 (W410 When sATS installed) Mounting capability 25k CPH - 17k CPH (IPC 9850) (14,1k CPH IPC 9850 When 12mm feeder pitch interface installed

Features: Handles a wide range of components from 03015mm (0.3 × 0.15mm) ultra-micro-chips to large parts 55 × 100mm and 15mm in height and needs no head replacement since it uses high-speed general-purpose heads the same as high-end models. 01 1-Head Solution Handles a wide range of components from 03015mm (0.3 × 0.15mm) ultra-micro-chips to large parts 55 × 100mm and 15mm in height and needs no head replacement since it uses high-speed general-purpose heads the same as high

Features: Two types of heads are available that bring the “1-head solution” to an even higher dimension capable of accommodating a wide range of components while maintaining high speed with no head replacement. High-speed general-purpose heads can be used for ultra-small (0201mm) chip components. 01 1-Head Solution Two types of heads are available that bring the "1-head solution" to an even higher dimension capable of accommodating a wide range of components while maintaining

Features: The speed is achieved by the leading-edge technology including innovative high-speed rotary heads and servo motors incorporating new, high-speed algorithms, etc. 01 Highest productivity in the world! World’s fastest! 200,000 CPH The speed is achieved by the leading-edge technology including innovative high-speed rotary heads and servo motors incorporating new, high-speed algorithms, etc. Multi-camera system Innovative multi-camera system has faster recognition speed

JUKI High-Speed Flexible Pick And Place Machine KE-3020VA Features: (1)From 0402(01005) to 74mm square components or 50x150mm (2)KE-3020VA One multi-nozzle laser head (6 nozzles) plus one IC head with CDS sensor (1 nozzle) (3)The use of electronic double tape feeders enables mounting of a maximum of 160 component types (4)MNVC is standard (5)High-speed on-the-fly vision centering (When using both high-resolution camera and MNVC) (6)High speed feeding of tray components

Features: 1.Installation performance of 20000 CPH (equivalent to 0.18 seconds/CHIP) 2. Can correspond to 0402-45 × 100mm element 3. Corresponding to large substrate, L size L510 × W460mm 4.Multiple types of disc packaging components, also corresponding to automatic exchange type 5.Tray feeding device (ATS15) 6.Built-in belt cutter 7.32mm and above require the installation of a dedicated suction nozzle component Model YS12F (Model : KKJ-100) Applicable PCB (mm) L50 x W50 to

Features: 1.The width of the small platform is 1254mm, and the production line can be freely arranged in the factory 2.The new 10 connected mounting head and new recognition system achieve a mounting capacity of 36000 CPH (equivalent to 0.1 seconds/CHIP: optimal conditions) 3.Maximum number of feeders 120 4.Corresponding L-size substrate (L510 × W460mm) 5.Corresponding body built-in belt cutter option Model YS12 (Model : KHY-000) Applicable PCB (mm) L50 x W50 to L640 x W460