PCTFE Rod

Custom Plastic PCTFE Sheet Rod For Chemical Low Temperature Resistance Products Description Polychlorotrifluoroethylene (PCTFE): Compared with PTFE, it has higher compressive strength and good dimensional stability. Can be used for anti-corrosion gaskets of chemical equipment, low-temperature mechanical parts, anti-corrosion valves, centrifugal pumps, etc. PCTFE is a copolymer that contains 49% fluorine. It has high compressive strength, high hardness, creep resistance,

White Daikin PCTFE Rod Tube Plate Custom Cutting Anti Corrosion Product Description PCTFE is a kind of perfect sealing material under low temperature, high vacuum system and high pressure working conditions. It has excellent rigidity, low temperature resistance, cryogenic fluid resistance, and airflowresistance. specification Key Properties Near-zero moisture absorption Excellent performance under a wide temperature range Resists most corrosive chemicals Excellent electrical

There are two kinds of PTFE rods to offer,One is manufactured by paste extruding method in the diameter from 4 to 9mm and the other is made by ram ertuding method is the method is the diameter from 10 to 50mm; rods over the diameter 50mm are manutactured by moulding. PTFE is the most chemical-resistant of all known plastics. It does not age. PTFE has a wide range of practicalble temperature from -180° C to +260C and a wax -like surface to which anything hardly hardly sticks.

Daikin Molded PCTFE Rod Kel F Plastic For LNG Application Product Description Item Unit Index value density g/cm3 2.10-2.18 Tensile strength Mpa 35 Elongation at break % 20-75 Temperature range °C -200-150 Dielectricity strength Kv/mm 15 Product Photos Details Images Application 1.Sealing gaskets, parts under high pressure, high strength and low temperature condition 2.Protective layer against moisture 3.Coating and prefabricated liner for chemical applications 4.Transparent

Industrial Grade Kel F Rod Neoflon PCTFE Low Temperature Plate Seal Ring Product Description PCTFE ROD PCTFE or Kel-f is a kind of perfect sealing material under low temperature, high vacuum system and high pressure working conditions. It has excellent rigidity, low temperature resistance, cryogenic fluid resistance, and airflowresistance. Application: PCTFE is a good choice for instrumentation, laboratory, aerospace and flight applications. Other common applications include

Round Neoflon PCTFE Rod Plate M 400h Sealing Ring Technical data for PCTFE Kel-f Rod Property Norm Value Density(g/cm³) ISO1183 2.1~2.18 Tensile Strength at Break(Mpa) ISO527 38~48 Modulus of Elasticity(Gpa) ISO527 1.45~1.6 Elongation at break(%) ISO527 40~100 Hardness Shore(Shore D) Durometer 85 Temperature Range(°C) / -200~120 Coefficient of Linear Thermal Expansion(10-4/°C) ISO11359 0.6 Our Advantages: 1.We are very experienced with this field(more than 10 years); 2.Good

PCTFE Introduction: Introducing our high-performance PCTFE (Polychlorotrifluoroethylene) Rod, engineered to exceed your expectations in the most demanding industrial applications. Designed with precision and crafted with excellence, our PCTFE Rod offers unparalleled strength, durability, and versatility, making it the ultimate choice for your critical projects. Specification: Unrivaled Durability: Our PCTFE Rod boasts exceptional resistance to chemicals, solvents, and extreme

White Translucent Kel F PCTFE Neoflon M400h Sheet application: 1. Contact with highly corrosive media, sealing and gasket materials of high-pressure systems, transparent materials for observation windows, etc. 2. Electrical insulation materials, etc. 3. Low molecular weight PCTFE is used as sealing fluid, grease for highly corrosive media and balancing fluid for navigation gyros. Specification: Our company has various specifications of PCTFE rods, pipes and plates. For

White Translucent Kel F PCTFE Neoflon M400h Sheet application: 1. Contact with highly corrosive media, sealing and gasket materials of high-pressure systems, transparent materials for observation windows, etc. 2. Electrical insulation materials, etc. 3. Low molecular weight PCTFE is used as sealing fluid, grease for highly corrosive media and balancing fluid for navigation gyros. Specification: Our company has various specifications of PCTFE rods, pipes and plates. For

Plastic PCTFE Polychlorotrifluoroethylene Rod KEL F Plate M300h Made from high-strength PTCFE (Polytetrafluoroethylene Carbon Fiber Reinforced Composite) Excellent wear resistance and corrosion resistance Lightweight design with exceptional mechanical properties Unique structure providing outstanding rigidity and stability Suitable for a wide range of applications including mechanical engineering, chemical industry, electronics Whether you are seeking high-performance

PCTFE (POLYCHLOROTRIFLUOROETHYLENE) PCTFE offers the unique combination of physical and mechanical properties, non-flammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful temperature range of -400°F to +300°F. PCTFE also has extremely low outgassing (0.01% TML, 0.00% WVR when tested per ASTM E595-90), so it is suitable for use in

PCTFE (POLYCHLOROTRIFLUOROETHYLENE) PCTFE (PolyChloroTriFluoroEthylene) originally known as Kel-F and sometimes referred to as Neoflon, combines physical and mechanical properties, non-flammability, chemical resistance, near-zero moisture absorption and excellent electrical properties not found in any other thermoplastics fluoropolymer that also performs in a temperature range of -400 F to 400 F. Features Dimensionally stable, rigid, and resistant to cold flow Near zero

PCTFE Introduction: Used in the production of MM end-capping agent, silazane, cephalosporin antibiotic, protection agent of active groups' reaction etc. Specifications: Appearance Colorless clear Density(P20,g/cm3) 0.86 Content Min 99% Melting Point -57.7ºC Boiling Point 57.9ºC Flash Point -18.0ºC Products available: 1). PCTFE rod: (Dia. Φ 5mm~ Dia. Φ 136mm) 2). PCTFE Sheet (100mm*100mm; 200mm*200mm; 300mm*300mm; 400*400mm, special size can be customized) 3). PCTFE Bush/PCTFE

PCTFE Introduction: Used in the production of MM end-capping agent, silazane, cephalosporin antibiotic, protection agent of active groups' reaction etc. Specifications: Appearance Colorless clear Density(P20,g/cm3) 0.86 Content Min 99% Melting Point -57.7ºC Boiling Point 57.9ºC Flash Point -18.0ºC Products available: 1). PCTFE rod: (Dia. Φ 5mm~ Dia. Φ 136mm) 2). PCTFE Sheet (100mm*100mm; 200mm*200mm; 300mm*300mm; 400*400mm, special size can be customized) 3). PCTFE Bush/PCTFE

Kel F Polychlorotrifluoroethylene PCTFE Rod Plates Pipes ODM Product Description Kel-F - PCTFE (PolyChloroTriFluoroEthylene) Kel F is a fluorocarbon-based polymer and is commonly abbreviated PCTFE. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful

White Translucent Kel F PCTFE Neoflon M400h Sheet application: 1. Contact with highly corrosive media, sealing and gasket materials of high-pressure systems, transparent materials for observation windows, etc. 2. Electrical insulation materials, etc. 3. Low molecular weight PCTFE is used as sealing fluid, grease for highly corrosive media and balancing fluid for navigation gyros. Specification: With near zero moisture absorption, PCTFE brings the combination of physical and

PRODUCT INTRODUCTION: THE ADDITION OF A CHLORINE ATOM, IS PARTLY RESPONSIBLE FOR A LOWER MELT INDEX. AS A RESULT, PCTFE CAN BE USED FOR EXTRUDING, INJECTION MOLDING AND HOT PRESSING. IT CONTRIBUTES TO THE TRANSPARENCY OF THE MATERIAL AS WELL, THE EXCEPTIONAL RESISTANCE TO CREEP, AND THE STIFFNESS OF THE POLYMER. MATERIAL PROPERTIES: • ESPECIALLY SUITABLE FOR CRYOGENIC APPLICATIONS • EXCELLENT RESISTANCE TO CREEP • DIMENSIONALLY STABLE OVER A WIDE TEMPERATURE RANGE • EXTREMELY

PRODUCT INTRODUCTION: THE ADDITION OF A CHLORINE ATOM, IS PARTLY RESPONSIBLE FOR A LOWER MELT INDEX. AS A RESULT, PCTFE CAN BE USED FOR EXTRUDING, INJECTION MOLDING AND HOT PRESSING. IT CONTRIBUTES TO THE TRANSPARENCY OF THE MATERIAL AS WELL, THE EXCEPTIONAL RESISTANCE TO CREEP, AND THE STIFFNESS OF THE POLYMER. MATERIAL PROPERTIES: • ESPECIALLY SUITABLE FOR CRYOGENIC APPLICATIONS • EXCELLENT RESISTANCE TO CREEP • DIMENSIONALLY STABLE OVER A WIDE TEMPERATURE RANGE • EXTREMELY

PCTFE, which stands for Polychlorotrifluoroethylene, is the homopolymer of chlorotrifluorethylene. It is a high-performance polymer that is well-known for its unique set of properties. PCTFE is a fluoropolymer that combines excellent chemical resistance with exceptional thermal stability, mechanical strength, high radiation exposure and cryogenic application. These attributes make PCTFE an ideal choice for applications where extreme durability and long-term performance are

PCTFE, which stands for Polychlorotrifluoroethylene, is the homopolymer of chlorotrifluorethylene. It is a high-performance polymer that is well-known for its unique set of properties. PCTFE is a fluoropolymer that combines excellent chemical resistance with exceptional thermal stability, mechanical strength, high radiation exposure and cryogenic application. These attributes make PCTFE an ideal choice for applications where extreme durability and long-term performance are