Stainless Steel Strip Coils

Type 410 (UNS S41000) in Coil Form Type 410 is a corrosion and heat resistant martensitic stainless steel containing approximately 12% chromium offering a wide range of mechanical properties through heat treatment. This grade offers a moderate level of corrosion resistance and the maximum resistance is obtained by hardening through heat treatment followed by polishing. Type 410 is used for cutlery applications, kitchen utensils and hand tools and is magnetic in both the

409 Stainless Steel Coil Type 409 has the lowest chromium content of the 400 series stainless steels. It cannot be heat-treated and because of its lower chromium content, Type 409 has lower corrosion resistance than other 400 series alloys and is not suitable for high quality appearance applications. Typical applications include automobile mufflers, casket liners, trailer bodies and swimming pool fixtures. Product Name Stainless Steel Coils Grade 201,301,303,304/304L, 309

347 (UNS S34700) Stainless Steel Rolled Coil, High Quality Steel Coil Columbium and tantalum have been added to 347 to form columbium carbide in preference to chromium carbide in the sensitization range. Columbium stabilization is desired because its carbides are better retained in welds. It also delays becoming sensitized during exposures to temperatures in the sensitization range. Type 347 does require more care due to the presence of columbium. Product Name Stainless Steel

Stainless Steel Coils, Grade 321 (S32100) ​ 321 stainless steel coil and sheet is part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900 degrees Celsius where 304 is normally used up to 500 degrees Celsius. Grade 321 has excellent forming and welding characteristics. It does not polish well so would not be

ASTM A-666 316 Annealed Stainless Steel Coil 316 to ASTMA-666 stainless steel strip are molydbenum bearing stainless steels possessing a greatly increased resistance to chemical attack as compared to that of the basic chromium-nickel analysis. In addition, Type 316 also offers higher creep, stress-to-rupture, and tensile strengths at elevated temperatures than any other stainless steel. Product Name Stainless Steel Coils Grade 201,301,303,304/304L, 309/309S, 310,316/316L,321,

ASME SA240 310S (UNS S31008) Stainless Steel Flat Rolled Coil 310S stainless steel coil is austenitic chromium-nickel stainless steel with good oxidation resistance and resistance, corrosion and high temperature resistance. Because of the higher percentage of chromium and nickel, it has much better strength, can work continuously at high temperature, and has good high temperature resistance. Product Name Stainless Steel Coils Grade 201,301,303,304/304L, 309/309S, 310,316/316L

1.4841/310 (S31000) stainless steel coil 310 stainless steel austenitic chromium nickel stainless steel has good oxidation resistance, corrosion resistance, because the higher percentage of chromium and nickel, 310 has much better creep strength, can continuously work under high temperature, good heat resistance. Product Name Stainless Steel Coils Grade 201,301,303,304/304L, 309/309S, 310,316/316L,321, 409,410,430,S31803,S32205,S32750,Duplex 2205 etc. Thickness 0.1mm-6mm

1.4950/ 309S (S30908) Stainless Steel Coil 309S are austenitic chromium-nickel stainless steels that are often used for higher temperature applications. Due to their high chromium and nickel content, Alloys 309S are highly corrosion resistant, have outstanding resistance to oxidation, and excellent heat resistance while providing good strength at room and elevated temperatures. The only significant difference between 309 and 309S is the carbon content. Alloy 309S has a much

ASTM A240 309 (S30900) Stainless Steel Coil 309 is an austenitic heat resistant alloy with oxidation resistance to 1900°F under constant temperature conditions. When frequent thermal cycling is involved, the alloy is resistant to about 1850°F. The high chromium and relatively low nickel content of 309 provide good resistance to high temperature sulfur bearing atmospheres. 309 has only moderate resistance to carbon absorption and is not suggested for use in highly carburizing

Stainless Steel Coil , Type 304L (S30403) 304L grade with 0.030% maximum carbon is similar to the 304 grade, but with much enhanced performance in the sensitization range. Due to its superior resistance to intergranular corrosion following stress relieving or welding, Type 304L is broader in application versatility. The extra-low carbon 304L is required when welding joins heavy sections or an aggressive corrosion environment exists and post-weld annealing is not possible.

301 (UNS S30100) Stainless Steel Coil With its chromium-nickel base, Type 301 is an austenitic alloy applicable for a variety of uses. High corrosion and abrasion resistance, forming and drawing qualities, weldability, strength and ductility make Type 301 a highly marketable product. It is hardened only by cold working, not by heat-treatment, as are all high chromium-nickel steels. It is nonmagnetic in the annealed state yet Type 301 becomes slightly magnetic with progressive

304 (UNS S30400) Stainless Steel Coil Stock & Stilling, 8K Surface With its chromium-nickel content and low carbon, Type 304 is the most versatile and widely used of the austenitic stainless steels. Occasionally referred to as “18-8,” it has better corrosion resistance than Type 301 or 302 and offers excellent drawing and forming characteristics. It offers satisfactory service at high temperatures although carbide precipitation may occur with prolonged exposure to the