Bently Nevada Vibration Monitoring System

Bently Nevada 3500/25-02-01-CN Enhanced Keyphasor Module Description The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor signals to the monitor modules in a 3500 rack. The module receives input signals from proximity probes or magnetic pickups and converts the signals to digital Keyphasor signals that indicate when the Keyphasor mark on the shaft coincides with the Keyphasor transducer. The 3500 Machinery Protection System can

Bently Nevada 330130-080-00-00 3300 XL Standard Extension Cable Product No. : 330130-080-00-00 Product type : 3300 XL Standard Extension Cable Made in U.S.A Can add on Certificate Of Origin Cable length option : 080 = 8.0 metres (26.2 feet) Connector Protector and Cable Option : 00 = Standard cable Agency Approval Option : 00 = Not required Related Product Recommendation: 330130-080-01-00 330130-040-01-00 330130-040-03-CN 330130-085-13-CN 330130-075-02-00 330130-085-00-00

Bently Nevada 3500/92-02-01-00 Communication Gateway Description The 3500/92 Communication Gateway module provides extensive communication capabilities of all rack monitored values and statuses for integration with process control and other automation systems using both Ethernet TCP/IP and serial (RS232/RS422/RS485) communications capabilities. It also permits Ethernet communications with 3500 Rack Configuration Software and Data Acquisition Software. Supported protocols

Bently Nevada 330525-CN Velomitor XA Piezo-velocity Sensor Manufacturer : Bently Nevada Product No. : 330525-CN Product type : Velomitor XA Piezo-velocity Sensor Made in U.S.A Can add on Certificate Of Origin (COO) Model : 330525 = Approvals Agency Approval Option : CN = Approvals country specific (CN Approvals Option Quick Reference Guide and Field Notification Letter are in the download section) Related Product Recommendation: 330500-02-CN 330500-00-CN 330500-01-CN 330500

Bently Nevada 3500/65-01-00 16-Channel Temperature Monitor Description The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints. The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel Temperature Monitor to accept

Bently Nevada 330106-05-30-05-02-00 3300 XL 8 mm Reverse Mount Probes Product No. : 330106-05-30-05-02-00 Product type : 3300 XL 8 mm Reverse Mount Probes Can add on Certificate Of Origin (COO) Total Length Option : 05 = 0.5 metre (1.6 feet) Connector Option : 02 = Miniature ClickLocTM coaxial connector Agency Approval Option : 00 = Not required Probe Tip Material : Polyphenylene sulfide (PPS). Probe Case Material : AISI 303 or 304 stainless steel (SST). Probe Pressure : 3300

Bently Nevada 3500/62-03-00 Process Variable Monitor Description The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints. The 3500/62

142238-120-00-CN Bently Nevada Cable Manufacturer : Bently Nevada Product No. : 142238-120-00-CN Product Type : Probe Proximity Vibration Made in U.S.A Can add on Certificate Of Origin (COO) Connector and Cable Option : 00 - Standard cable Agency Approval Option : CN - Approvals country specific (CN Approvals Option Quick Reference Guide and Field Notification Letter are in the download section) Use this cable with a 2-metre 3300 or 3300 XL probe with the 170133-140-XX 3300

Bently Nevada 125800-01 3500/25 Keyphasor I/O Module (Internal Terminations) The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor signals to the monitor modules in a 3500 rack. The module receives input signals from proximity probes or magnetic pickups and converts the signals to digital Keyphasor signals that indicate when the Keyphasor mark on the shaft coincides with the Keyphasor transducer. The 3500 Machinery Protection

Bently Nevada 3500/64-01-00 Dynamic Pressure Monitor Description The 3500/64M Dynamic Pressure Monitor is a single slot, fourchannel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor’s one measured variable per channel is bandpass dynamic pressure. You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional notch filter. The monitor provides a

Bently Nevada 330400-02-CN Accelerometer Acceleration Tranducer Manufacturer : Bently Nevada Product No. : 330400-02-CN Product type : Accelerometer Acceleration Transducers Can add on Certificate Of Origin (COO) Mounting Thread Option : 02 = M8 X 1 integral stud Agency Approval Option : CN = Approvals country specific (CN Approvals Option Quick Reference Guide and Field Notification Letter are in the download section) The 330400 is designed to address the requirements of

Bently Nevada 3500/94M-02-00-CN VGA Display Module Description The 3500/94M VGA module displays all 3500 machinery protection system information, including: • System event list • Alarm event list • All module and channel data • Alarm and OK status • Nine custom display options • Enhanced Keyphasor Module Use the 3500 Rack Configuration Software to configure up to nine custom screens. By default, one bar graph screen shows all of the 1X-filtered vibration measurements, while

3500/05-01-02-00-00-01 Bently Nevada Vibration Monitoring System 19 Inch Rack 14 Module Slots Related Product Recommendation: 3500/42-02-CN 3500/65-02-00 3500/15-05-07-00 3500/25-01-05-CN 3500/94M-05-00-00 3500/15-07-07-00 3500/25-02-03-00 3500/70M-01-00 3500/92-02-01-CN 3500/42-04-CN 3500/25-02-04-00 3500/05-01-02-00-00-01 3500/42-06-CN 3500/61-02-00 3500/15-07-07-CN 3500/45-02-00 3500/94-06-00-00 3500/22-01-01-00 3500/42-05-00 3500/05-01-03-CN-00-01 3500/22-01-02-00 3500/25

330902-00-30-10-02-00 Bently Nevada 3300 NSv Probe, 1/4-28 UNF Thread, With Armor Product No. : 330902-00-40-10-02-00 Product Type : 3300 NSv Probe, 1/4-28 UNF thread, with armor Made in U.S.A Can add on Certificate Of Origin (COO) Unthreaded Length Option : 0 0 - 0 in Overall Case Length Option : 3 0 - 3.0 in Total Length Option : 1 0 - 1.0 metre (39 in) Connector and Cable-Type Option : 0 2 - Miniature coaxial ClickLoc connector, standard cable Agency Approval Option : 0 0

Bently Nevada 3500/70M-01-00 Recip Impulse Velocity Monitor Description The 3500/70M Recip Impulse Velocity Monitor is a 4-channel device used as part of the reciprocating compressor solutions package to monitor compressor crankcase and crosshead vibration. The monitor accepts input from seismic transducers, conditions the signal to derive vibration measurements, and compares the conditioned signals with user-programmable alarms. You can program each channel using the 3500

Bently Nevada 330907-05-30-10-02-00 3300 NSv Reverse Mount Probe Manufacturer : Bently Nevada Product No. : 330907-05-30-05-02-CN Product type : 3300 NSv Reverse Mount Probe Can add on Certificate Of Origin (COO) Total Length Option : 10 = 1.0 meter (39 in) Connector Option : 02 = Miniature coaxial ClickLoc connector, standard cable Agency Approval Option : 00 = Not required Related Product Recommendation: 330907-05-30-50-02-CN 330907-05-30-05-02-00 330907-05-30-10-02-CN

133442-01 Bently Nevada I/O Module with Internal Terminations Description 133442-01 Bently Nevada SIGNAL INPUT MODULE,FOR TACHOMETER MONITOR MODULE, 3500/50, 2 CHANNEL Product Information ◆ The 3500/50 Tachometer Module is a 2-channel module that accepts input from proximity probes or magnetic pickups to determine shaft rotative speed, rotor acceleration, orrotor direction. ◆ The module compares these measurements against user-programmable alarm setpoints and generates alarms

Bently Nevada 330130-040-00-00 3300 XL Standard Extension Cable Product No. : 330130-040-00-00 Product type : 3300 XL Standard Extension Cable Can add on Certificate Of Origin Cable length option : 040 = 4.0 metres (13.1 feet) Connector Protector and Cable Option : 00 = Standard cable Agency Approval Option : 00 = Not required Related Product Recommendation: 330130-045-01-00 330130-040-02-00 330130-070-10-CN 330130-080-02-CN 330130-040-02-CN 330130-075-02-CN 330130-070-01-CN

Bently Nevada 330103-00-12-15-02-CN 3300 XL 8 mm Proximity Probes Product No. : 330103-00-10-05-02-CN Product type : 3300 XL 8 mm Proximity Probes Can add on Certificate Of Origin (COO) Unthreaded Length Option : 00 = 0 mm Overall Case Length Option : 12 = 120mm Total Length Option : 15 = 1.5 metres (4.9 feet) Connector and Cable-Type Option : 02 = Miniature coaxial ClickLocTM connector, standard cable Agency Approval Option : CN = Approvals country specific (CN Approvals

Bently Nevada 200151-60-03-00 Accelerometer Interface Standard Cable Manufacturer : Bently Nevada Product No. : 200151-60-03-00 Product type : Accelerometer Interface Standard Cable Made in U.S.A Can add on Certificate Of Origin Cable length : 60 = 6.0 meters Armor option : 03 = Blue Cable; with Armor Coupling nut : 00 = Standard Coupling Nut Minimum Bend Radius : 63.5 mm (2.5 in) Related Product Recommendation: 3500/42 128240-01 3500/92 136180-01 3500/92136180-01 3500/94-013