Eltek Outdoor Cabinet

Enabling optimization of Telecom sites Eltek’s 380VDC systems provide operators with the ability to solve the combined challenges of ever greater power density, varying load types,and increased site flexibility without compromising on performance, cost,orserviceability. Utilizing high efficiency power conversion modules,innovative design,and comprehensive monitoring and control features to fully optimize the potential of the .

Rectiverter Scalable System 18-54 kVA In combination with the optional B-input (dual AC input) eliminates the need for a traditional ATS (Automatic Transfer Switch).Where the switch from A to B input, is a seamless operation with no interruption on the AC load. When configured with dual AC input for use as an AC UPS, it classifies as - VFI SS 111 according to EN 62040-3 Key features 400 VAC 3 phase (Y) input 400 VAC 3 phase (Y) output 48 VDC input/output Max 54 kVA / 43,2 kW

Rectiverter Scalable System 18-72 kVA with single AC input 48kW CTER2442.xxxx The scalable Rectiverter indoorsystem provides AC backup power for400 VAC3-phaseor 230 VAC1-phaseloads, and-48 VDCpower for batterycharging. The flexible DC output can be set to recharge large batterybackup with protection time up to 10 hours. The systems are available in three configurations with maximum AC outputpower up to 36, 54 or 72 kVA. AC distributions are integrated in thecabinet with

Flatpack2 DC/DC 380V/54V 36kW System 3000W CDT31242.xxx SHE Module Smartpack2 Control and Monitoring Using the Flatpack2 DCDC 380/48 3000 SHE module with Eltek’s feature-rich Smartpack2 control and monitoring unit enables sites to benefit from utilizing 380 VDC as a transmission voltage, either for a competitive alternative to traditional UPS in Data Centers, or for central power plants in Telecom site expansions. Integrating state-of-the-art, super high efficiency converter

Rectiverter-Indoor system Scalable system120kW with optional A & B, AC input The scalable Rectiverter indoor system provides backup power for400 VAC3-phaseor230VAC1-phase loads, and 48 VDC power for DC loads and battery charging. The system has a maximum load capacity of 108 kW, which is dynamically variable to provide AC outputs up to 90 kVA/72kW and also feed DCloads up to 72 kW with built in AC & DC distribution. When used incombination with the optional B-input (dual AC

Rectiverter Indoor system6 kVA AC + 12,8-24 kW DC The Rectiverter indoor system combines both AC and DC feed into onecommon unit. Simultaneously it provides AC backup power for 230 VACloads, and 48 VDCpower for DC loads and battery charging. The total DC output can be configured up to 24 kW DC load where thelimitation for AC load is set to max 6 kVA. Together with our IFC & FPC cabinet platform it’s designed for a variety ofapplications and can be tailored to fit your

Rectiverter Outdoor system 6 kVA AC + 12,8-21 kW DC AC and DC feed into one common unit CTEJ0834.4000 The Rectiverter outdoor system combines both AC and DC feed into onecommon unit. Simultaneously it provides AC backup power for 230 VACloads, and 48 VDCpower for DC loads and battery charging. The total DC output can be configured up to 21kW DC load where thelimitation for AC load is set to max 6 kVA. Together with our Type 3 cabinet platform it’s designed for a variety

Rectiverter 6kVA Marine 1ph MB 230V CIER0418.002 230 VAC / 200 - 240 VAC 4800 W (6000 VA) / 8000 VA26ARMS / 34 8ARMS The Rectiverter power module combines both AC and DC feed into one common unit. Simultaneously it provides AC backup power for 230 VAC or 115 VAC loads, and 48 VDC power for battery charging. AC and DC output limits can be set according to the attached load, where the limitation for AC load is set to max 6 kVA with possibility to set recharge values for battery

MiniCPS 65kW power system Up to 75 kVA AC & up to 33kW 48 VDCoutput with dual AC input TheMiniCPSindoor system combines both AC and DC feedsinto onecommon unit. SimultaneouslydeliveringAC backup power for 230/400VACloads, and 48 VDCpower for DC loads and battery charging. Providinga maximum output power of 65kW fromtwo separate,redundant,AC sources, and able to have a variable splitbetween AC andDC loads, the system provides a comprehensive solution for sites withflexible

Large Power System 36 - 288kW Flatpack2 DRP6000B Cabinetized Flexible DC Distribution Configurations Top Entry FP2

Eltek Outdoor Power Cabinet Type 3 The Type 3 cabinet platform is designed for a variety of applications and can be tailored to fit your specific needs. The cabinet is well suited for power, batteries, and telecom/industrial equipment, all integrated into a robust package. This solution has a unique cube design 'that give flexibility to easily have various heights of cabinets. RELIABILITY Reliability within the outdoor plant depends upon a cool, dry and secure environment for

Enabling optimization of Telecom sites Eltek’s 380 VDC systems provide operators with the ability to solve the combined challenges of ever greater power density, varying load types, and increased site flexibility without compromising on performance, cost, or serviceability. Utilizing high efficiency power conversion modules, innovative design, and comprehensive monitoring and control features to fully optimize the potential of the power infrastructure.

Flatpack2 24V/48kW DC power system The combination of cost-effective design, power density and reliability makes the Flatpack2 24V 48 kW a product family that truly stands out and provides unparalleled availability. The versatility of the Flatpack2 rectifier means that it can be used in a wide variety of 24 VDC marine applications across the globe. The Flatpack2 24V 48kW has been specifically designed to meet the demand for higher density and more compact power solutions for