Stainless Steel Heat Exchanger Tube

3/4" 16BWG 20FT SS Seamless Tube Corrosion Resistance Heat Exchanger Condernser Air Cooler Material TP304 TP316 TP321 Material Grade: Tube Sizes for Heat Exchangers & Condensers & Boiler Outside Diameter 　 BWG 25 22 20 18 16 14 12 10 　 Wall Thickness mm 0.508 0.71 0.89 1.24 1.65 2.11 2.77 3.40 mm inch 　 Weight kg/m 6.35 1/4 0.081 0.109 0.133 0.174 0.212 　 　 　 9.53 3/8 0.126 0.157 0.193 0.257 0.356 0.429 　 　 12.7 1/2 　 0.214 0.263 0.356 0.457 0.612 0.754 　 15.88 5/8 　 0.271 0

ASTM A213 / ASME SA213 TP304 / TP304L / TP316 / TP316L Stainless Steel Seamless Tube 3/4" 18 BWG 6M, Heat Exchanger Material Grade: American Standard Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Nickel Alloy: UNS NO8800, NO8811, NO8825, NO8810, NO718, NO690, NO6625, NO6600, NO4400 Others:TP405,TP409, TP410, TP430, TP439,... Europen

Stainless Steel Seamless Tube ASTM A213, ASME SA213 TP310S/310H, 25.4MM x 2.11MM x 4877.8MM, 6000MM, 6096MM 7315.2MM, 9144MM, 10000MM , 12192MM, pickled, annealed, wooden case packing Material Grade: American Standard Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Nickel Alloy: UNS NO8800, NO8811, NO8825, NO8810, NO718, NO690, NO6625,

Stainless Steel Seamless Tube, ASTM A213-2018 TP304. 33.7*1.5*4000MM for heat exchanger In the damp industrial or coastal atmospheres of Europe, they perform better than TP 304/304L and ferritic grades. In low temperature seawater they offer limited resistance to pitting but are susceptible to crevice attack. Their short- and long-time properties at elevated temperatures are also superior to those of comparable TP304/304L grades. Specification: ASTM A213 / SA213: Standard

Heat Exchanger Stainless Steel Seamless Tubes ASTM A213 / ASME SA213-10a TP316 / 316L,TP321 / TP321H. Specification: ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy- Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes. ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, Superheater, heat exchanger, and Condenser Tubes. Other Standard:DIN 17456 , DIN 17458, EN10216-5, GOST 9940-81, GOST 9941-81, JIS

Tube Sizes for Heat Exchangers & Condensers & Boiler 　 　 　 　 　 　 　 　 　 　 Outside Diameter 　 BWG 25 22 20 18 16 14 12 10 　 Wall Thickness mm 0.508 0.71 0.89 1.24 1.65 2.11 2.77 3.40 mm inch 　 Weight kg/m 6.35 1/4 0.081 0.109 0.133 0.174 0.212 　 　 　 9.53 3/8 0.126 0.157 0.193 0.257 0.356 0.429 　 　 12.7 1/2 　 0.214 0.263 0.356 0.457 0.612 0.754 　 15.88 5/8 　 0.271 0.334 0.455 0.588 0.796 0.995 　 19.05 3/4 　 0.327 0.405 0.553 0.729 0.895 1.236 　 25.4 1 　 0.44 0.546 0.75 0.981 1

ASTM A213 / ASME SA213 TP304 / TP304L / TP316 / TP316L Stainless Steel Seamless Tube 3/4" 18 BWG 6M, Heat Exchanger Material Grade: American Standard Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Nickel Alloy: UNS NO8800, NO8811, NO8825, NO8810, NO718, NO690, NO6625, NO6600, NO4400 Others:TP405,TP409, TP410, TP430, TP439,... Europen

ASTM B444 INCONEL 625/UNS NO6625 TUBE NICKEL ALLOY HEAT EXCHANGER APPLICATION Inconel Alloy 625 Common Trade Names: Inconel 625, Alloy 625, Nickel 625, Chornin 625, Altemp 625, Nickelvac 625, Haynes 625, Nicrofer® 6020. Inconel nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Strength of INCONEL alloy

ASTM A213 / ASME SA213 TP304 STAINLESS STEEL SEAMLESS TUBE, 20FT, HEAT EXCHANGER TUBE ube Sizes for Heat Exchangers & Condensers & Boiler 　 　 　 　 　 　 　 　 　 　 Outside Diameter 　 BWG 25 22 20 18 16 14 12 10 　 Wall Thickness mm 0.508 0.71 0.89 1.24 1.65 2.11 2.77 3.40 mm inch 　 Weight kg/m 6.35 1/4 0.081 0.109 0.133 0.174 0.212 　 　 　 9.53 3/8 0.126 0.157 0.193 0.257 0.356 0.429 　 　 12.7 1/2 　 0.214 0.263 0.356 0.457 0.612 0.754 　 15.88 5/8 　 0.271 0.334 0.455 0.588 0.796 0.995 　

Industrial Stainless Steel Seamless Tube A213 TP304 High Strength For Heat Exchanger In the damp industrial or coastal atmospheres of Europe, they perform better than TP 304/304L and ferritic grades. In low temperature seawater they offer limited resistance to pitting but are susceptible to crevice attack. Their short- and long-time properties at elevated temperatures are also superior to those of comparable TP304/304L grades. Specification ASTM A213 / SA213: Standard

Stainless Steel Seamless Tube, ASTM A213 TP321 / TP321H, Heat Exchanger Tube 3/4" 16BWG 20FT , EDDY CURRENT TEST Carbon Chromiun Low Temperature Stainless Steel Duplex Copper& Bronze Titanium Ni-Alloy SA178-A SA213-T1 SA333-Gr.1 SA213 TP316L A789-S31803 SB111-C70600 SB338-GR.1 SB163 NO2200 SA178-C SA213-T11 SA333-Gr.3 SA249 TP316H A789-S32205 SB111-C71500 SB338-GR.2 SB167 NO2201 SA179 SA213-T12 SA333-Gr.6 SA268 TP316Ti A789-S32750 SB111-C71640 SB338-GR.5 SB444 NO8020 SA192

HEAT EXCHANGER TUBE ASTM A213 TP316L STAINLESS STEEL SEAMLESS TUBE Overview Grade 316 Stainless Steel Tubes or UNS S31600 Tubes are one of the most common grades of stainless steel offers good strength and heat resistant and oxidation resistance properties in continuous temperature service. The key properties of this material are its high chromium and medium nickel content making its resistance to oxidation, sulfidation and other forms of hot corrosion its main characteristic

ASTM A268 TP410 (1.4006 UNS S41000) Ferritic Steel Seamless Tube for Heat Exchanger​ ASTM A268 /ASME SA268 TP410 tubes are primarily composed of the following elements: 1. Chromium (Cr): 11.5% to 13.5% 2. Carbon (C): Maximum 0.15% 3. Nickel (Ni): Maximum 0.75% 4. Manganese (Mn): Maximum 1.0% 5. Silicon (Si): Maximum 1.0% 6. Phosphorus (P): Maximum 0.04% 7. Sulfur (S): Maximum 0.03% ASTM A268 /ASME SA268 TP410 tubes Mechanical Properties: The mechanical properties of SA-268

Heat Exchanger Tube Stainless Steel Seamless Tube Durable Pickled Annealed Surface,Straight/U Type/Coil Tube for Cooling Specification: ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy- Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes. ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, Superheater Heat-Exchanger, and Condenser Tubes. ASTM A789/A789M, ASME SA789/SA789M Seamless and Welded Ferritic

ube Sizes for Heat Exchangers & Condensers & Boiler 　 　 　 　 　 　 　 　 　 　 Outside Diameter 　 BWG 25 22 20 18 16 14 12 10 　 Wall Thickness mm 0.508 0.71 0.89 1.24 1.65 2.11 2.77 3.40 mm inch 　 Weight kg/m 6.35 1/4 0.081 0.109 0.133 0.174 0.212 　 　 　 9.53 3/8 0.126 0.157 0.193 0.257 0.356 0.429 　 　 12.7 1/2 　 0.214 0.263 0.356 0.457 0.612 0.754 　 15.88 5/8 　 0.271 0.334 0.455 0.588 0.796 0.995 　 19.05 3/4 　 0.327 0.405 0.553 0.729 0.895 1.236 　 25.4 1 　 0.44 0.546 0.75 0.981 1

Stainless Steel Seamless Tube SB677 UNS NO8904 / 904L, 3/4" 14bwg 20ft , 1" 16 BWG 40FT , PICKLED Detail: Heat Exchanger stainless steel seamless tube bright annealed precision rolling Surface: bright and shining 1 Standard: ASTM A213/ASME SA213, ASTM A789, ASME SA789 , SB677 2 Material: TP304/304L , TP310S/310H, TP316/316L,TP316Ti, TP317/317L, TP321/321H, TP347/347H, 3 OD:6mm-152mm Thickness: 0.6mm-30mm 4 Certificate: PED, GOST, ISO, TS Heat Exchanger Tube , ASTM B677 / B674

Stainless Steel Seamless Tube for heat exchanger applicaiton EN 10216 / 5 TC 2 Grade 1.4401, 1.4404 , 1.4571 Detail: 1 Standard: ASTM A213/ASME SA213, ASTM A789, ASME SA789 , SB677 2 Material: TP304/304L , TP310S/310H, TP316/316L,TP316Ti, TP317/317L, TP321/321H, TP347/347H, 3 OD:6mm-152mm Thickness: 0.6mm-30mm 4 Certificate: PED, GOST, ISO SIZE RANGE : STEEL TYPES SIZE RANGE Stainless steel seamless pipe&tube OD: 6-609.6mm WT: 0.6-50mm MAIN STEEL TYPE AND GRADE : PRODUCTS

Heat Exchanger Stainless Steel Seamless Tubes, EN10216-5 , DIN 17456, DIN 17458 , D2 / T2, D3 / T3, D4 / T3, D4 / T4 1 Standard: ASTM A213/ASME SA213, ASTM A789, ASME SA789 , SB677 2 Material: TP304/304L , TP310S/310H, TP316/316L,TP316Ti, TP317/317L, TP321/321H, TP347/347H, 3 OD:6mm-152mm Thickness: 0.6mm-30mm 4 Certificate: PED, GOST, ISO SIZE RANGE : STEEL TYPES SIZE RANGE Stainless steel seamless pipe&tube OD: 6-609.6mm WT: 0.6-50mm MAIN STEEL TYPE AND GRADE : PRODUCTS

Heat Exchanger Seamless Tube , A213 TP304L , 3/4" 14 BWG 20FT , 100% ET / HT/ UT Specification: ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy- Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes. ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, Superheater Heat-Exchanger, and Condenser Tubes. ASTM A789/A789M, ASME SA789/SA789M Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for

Specification: ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy- Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes. ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, SuperheaterHeat-Exchanger, and Condenser Tubes. Other Standard:DIN 17456 , DIN 17458, EN10216-5, GOST 9940-81, GOST 9941-81, JIS-G3463,... Material Grade: American Standard Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316