Extruded Fin Tube

High-Efficiency Extruded Finned Tubes | A179 Carbon Steel Base with Aluminum Fins 1. Product Overview: Extruded Bimetal Finned Tubes Material: Base Tube - ASME SA-179 Carbon Steel | Fins - Aluminum 1100/3003 Extruded finned tubes combine the superior pressure resistance of carbon steel with the exceptional thermal conductivity of aluminum fins. Through a cold extrusion process, fins are metallurgically bonded to the base tube, creating a seamless heat transfer surface ideal

ASTM A179 Carbon Steel Extruded Fin Tubes With Al1060 Fins For Air Cooled Condenser (ACC) ASTM A179 specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. ASTM A179 cold-drawn low-carbon seamless tube is the most popular and cost-effective base tube choice for extruded finned tubes, particularly steel-aluminum extruded finned tubes. Its core advantages include

ASTM A249 TP304L Extruded Fin Tube I. Product Overview This is a stainless steel heat transfer tube. The core tube meets ASTM A249 for TP304L, a low-carbon, corrosion-resistant austenitic stainless steel. Its fins are formed by extruding the tube wall itself, creating a seamless, integral one-piece structure. This makes the tube efficient and durable, ideal for demanding heat exchanger applications where reliability is critical. It is commonly used in industries like chemical

EN10217-7 1.4301 Extrudded Finned Tube with Al1060 Fins for HRSGs System EN10217-7 1.4301 Extruded Finned Tube with Al1060 Fins is a high-performance, pressure-rated heat exchanger tube where: The inner pressure-bearing tube is made of stainless steel AISI 304 (1.4301), manufactured and tested according to the strict pressure vessel tube standard EN 10217-7. This makes it suitable for steam, hot water, or other process fluids under pressure. The outer heat transfer fins are

Carbon Steel Fin Tube , Extruded Type , ASTM A179 with Aluminum , Air Cooler / Dry Kiln application Yuhong Holding Group has more than 35 years experience for steel pipe and tube , fin tube , main application for Petrochemical , Oil refinary, Furnace, heating, boiler, heat exchanger, air cooler,.., till now YUHONG brand products already exported more than 85 countries, which like UK, ITALY, SPAIN , USA, MEXICO , COLOMBIA , BRAZIL, SAUDI ARANBIA , OMAN, QATAR, U.A.E, KOREA, ..

EN10217-7 1.4307 Seamless Stainless Steel Extruded Fin Tube Ⅰ. Product Overview This EN10217-7 compliant seamless stainless steel extruded fin tube is made of 1.4307 austenitic stainless steel, a low-carbon variant of 304 with ultra-low carbon content (≤0.03%). It boasts excellent corrosion resistance, outstanding intergranular corrosion resistance and weldability, with no post-weld heat treatment needed. Adopting advanced extrusion technology, the fins bond tightly to the

ASME SB338 Gr.2 Extrudded Finned Tube with Al1100 Fins for Air-Cooled Condenser ASME SB338 Gr.2 Extruded Finned Tube with Al1100 Fins is a very specific type of heat exchanger tubing used in applications requiring high efficiency and corrosion resistance. It's a premium tube designed to solve heat transfer problems in environments where corrosion is a primary concern. Let's break down the name "ASME SB338 Gr.2 Extruded Finned Tube with Al1100 Fins" into its components: 1.

ASTM A192 Extruded Fin Tube with AL1060: High-Efficiency Heat Transfer Solution I. Product Overview The ASTM A192 extruded fin tube with AL1060 aluminum fins is a high-performance heat transfer solution designed for applications requiring superior thermal efficiency and durable mechanical bonding. This composite tube excels in low to moderate temperature services, offering an optimal solution where heat transfer and structural integrity are top priorities. The base material

Product Overview The stainless steel grade 1.4301, as specified in the EN 10217-7 standard, derives its fundamental characteristics from its defined chemical composition and standard heat treatment condition. Its typical composition includes a maximum carbon (C) content of 0.07%, chromium (Cr) content between 17.5% and 19.5%, and nickel (Ni) content within the range of 8.0% to 10.5%. In the solution annealed (+AT) condition, it exhibits a room temperature thermal conductivity

EN 10217-7 1.4301 Extruded Fin Tubes Manufacturing Process Manufacturing Process Step 1: Base Tube Preparation Source EN 10217-7 certified 1.4301 stainless steel welded tubes Inspect for dimensional accuracy, surface defects, and chemical composition (per EN 10217-7) Clean and degrease tube surface to ensure optimal bonding Step 2: Sleeve Installation Slide a thick-walled aluminum sleeve (muff) over the 1.4301 base tube Ensure precise alignment and concentricity for uniform

ASME SA249 TP304L Welded Extruded Fin Tube With Aluminum Fin 1.Product Overview A SME SA249 is a standard specification for welded austenitic stainless steel tubes for boiler, superheater, heat exchanger and condenser applications. TP304L, as a low-carbon variant of TP304 (carbon content ≤ 0.03%), boasts excellent intergranular corrosion resistance after welding — its core alloy composition (18.00-20.00% Cr, 8.00-12.00% Ni) endows it with superior general corrosion resistance

ASME SA249 TP304 Extruded Finned Tube with Al1100 Fins For Air-Cooled Condensers An ASME SA249 TP304 Extruded Finned Tube with Al1100 Fins is a high-performance, durable, and efficient heat exchanger component engineered for applications requiring reliable heat transfer from a stainless steel-contained fluid to a gaseous medium. Its primary purpose is to efficiently transfer heat between the fluid inside the tube and the gas (like air or flue gas) outside the tube. Component

ASTM A213 TP304 Extruded Finned Tubes For Fired Heater Convection Sections The convection section functions as a vital heat recovery assembly within direct-fired heaters (also referred to as furnaces) that are utilized in refineries, petrochemical facilities, and chemical processing plants. The engineering and configuration of this section exert a direct influence on the heater’s overall thermal performance efficiency and the economic viability of its day-to-day operation.

YUHONG brand goods have been already exported to more than 85 countries With more than 35 years' experience, because of strict quality control policy, excellent sales service, delivery on time. YUHONG won more and more new clients and got more and more repeat orders from old clients, in YUHONG People's mind: Quality is First Important! Extruded Finned Tubes ASTM A179 With Aluminum 1060 Fins For Consensers and Air Coolers Introduction An Extruded Finned Tubes ASTM A179 With

YUHONG brand goods have been already exported to more than 85 countries With more than 35 years' experience, because of strict quality control policy, excellent sales service, delivery on time. YUHONG won more and more new clients and got more and more repeat orders from old clients, in YUHONG People's mind: Quality is First Important! EN10217-7 1.4301 Stainless Steel Tube With Al Fins Extruded Fin Tube For HVAC&R This product is a high-efficiency Bimetallic Finned Tube ,

Carbon Steel Fin Tube, Exruded Fin Type,ASTM A179, Air Cooler,Heat Exchanger What is Structural Features of extruded fin tube? Integral Formation of Fins and Base Tube:The fins and base tube of extruded fin tubes are integrally formed through the extrusion process. There are no gaps between the fins and the base tube, resulting in a tight bond, low thermal resistance, and high heat transfer efficiency. Diverse Fin Shapes: The shape of the fins can be designed according to

Extruded Fin Tube,ASTM A312 TP304 For Heat Exchanger ASTM A312 specifies requirements for the chemical composition, mechanical properties, and manufacturing processes, ensuring high-quality stainless steel pipes.ASTM A312 materials can maintain strength and integrity at elevated temperatures, making them ideal for high-temperature applications such as boilers and heat exchangers. TP304L has excellent resistance to a wide range of corrosive environments, making it suitable for

Extruded Fin Tube With Base Tube ASTM A269 TP304 AL1060 Fin Applied For Heat Exchanger Extruded Tube is an efficient and compact heat exchange device with the following characteristics and application areas.The extruded finned tube greatly increases the heat transfer area through its fin structure, thereby improving the heat exchange efficiency. The fins of the extruded finned tube are tightly integrated with the base tube, forming an efficient heat conduction path and

ASTM A249 TP304 Welded Extruded Finned Tubes For Petrochemical Plants Petrochemical plants operate under extreme conditions (high temperature, high pressure, corrosive media), demanding robust and efficient equipment. Such as fired heaters (furnaces), heat exchangers, reactors, distillation columns, storage tanks.Finned tubes are an indispensable part of these highly efficient equipment. For example, in fired heaters, high-frequency welded (HFW)and extruded finned tubes are

Extruded Fin Tube ASTM A179 Carbon Steel Seamless Tube For HRSG System ASTM A192 / A192M : Seamless Carbon Steel Boiler Tubes for High-Pressure Service ASTM A210 / A210M : Seamless Medium-Carbon Steel Boiler and Superheater Tubes ASTM A179 / A179M : Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes General extrusion production capacity General specifications of Extruded Fin Tubes/Embedded Facility: 20 finning machines. Daily capacity up to 7600 meters.