Wound Fin Tube

ASTM A179 Wound Aluminum L Type Fin Tube , Air Cooler, Cooling Tower ASTM A179 L Type Fin Tubes are made from carbon steel, which has excellent thermal conductivity and corrosion resistance. These fin tubes are manufactured using a seamless process, ensuring their uniformity and strength. L type fin tubes are made of a thin aluminum fin strip which is tightly wound helically around the circumference of the ASTM A179 base tube. The strip is then tightly wound around the tube,

Wound Fin Tube, ASME SA179 with Aluminum 1060 , L type Fin tube, Air Cooler and Condenser Application What is L type Fin Tube? And what's the advantage of L type fin tube? L-Type Fin Tube refers to a type of Heat Exchanger Tube that has fins attached to its outer surface in an L-shaped pattern. These fins are typically made of aluminum or copper and are used to enhance heat transfer between the fluid inside the tube and the surrounding environment. The advantage of L-Type Fin

ASTM A213 TP316L Wound With Aluminum 1060 Aluminum L Type Fin Tube , Air Cooler, Cooling Tower TP316L stainless steel typically exhibits excellent corrosion resistance, high strength at elevated temperatures, and good mechanical properties. It is commonly used in industries requiring resistance to corrosive environments, such as chemical processing, pharmaceuticals, food processing, and marine applications. L type fin tubes are made of a thin aluminum fin strip which is

Monel 400 ASME SB163 NO4400 Al 1060 Wound Fin Tube For Air Cooler , Heat Exchager Monel 400 is a nickel-copper alloy (approximately 67% Ni and 23% Cu) that is known for its excellent corrosion resistance in a wide range of environments. It also has good mechanical properties and can be fabricated by hot- and cold-working, machining, and welding. Monel 400 is a versatile nickel-copper alloy known for its superior corrosion resistance, strength, and durability. When combined

Wound Fin Tube ASME SA210 Gr.A-1 Aluminum ASTM B209 Gr.1060 For Air Cooler , Heat Exchager Gr.A-1 refers to Grade A-1, a specification under ASTM (American Society for Testing and Materials) standards, specifically ASTM A210. This grade is commonly used for seamless medium-carbon steel boiler and superheater tubes. It is designed to withstand high pressure and high temperatures. Gr.A-1 is a medium-carbon steel grade designed for high temperature and pressure applications,

Wound L Type Fin Tube ASTM A249 TP304 For Heat Exchanger , Air Cooler Grade TP304 is a widely used austenitic stainless steel known for its excellent corrosion resistance, formability, and weldability. It is a member of the 300 series of stainless steels and is composed mainly of chromium and nickel, which provide its outstanding properties. Wound L Type Fin Tube ASTM A249 TP304 is a specialized heat exchanger component that combines the properties of Grade TP304 stainless

Wound Fin Tube ASTM A249 TP321 For Air Cooler , Heat Exchager , Condenser TP321 is a titanium-stabilized austenitic stainless steel that offers excellent resistance to intergranular corrosion following exposure to temperatures in the chromium carbide precipitation range from 427°C to 816°C (800°F to 1500°F). This alloy is particularly suitable for high-temperature applications and environments where oxidation and corrosion resistance are crucial. When used in ASTM A249 TP321

ASME SA179 Wound L Fin Tubes With AL1060 Fins Tubos Aletados Para Calderas Definition Wound fin tubes are a type of heat exchanger tube that features fins wrapped around the outer surface of the tube. The fins are typically made from materials like aluminum or copper and are wound in a helical or spiral pattern. This design increases the surface area of the tube, enhancing its ability to transfer heat between the fluid inside the tube and the surrounding environment. The

ASTM A179 Wound Fin Tube L Type With Material AL 1060 For Air Cooler,Bolier The ASTM A179 Wounded Fin Tube design significantly enhances the surface area of the tube, improving heat exchange efficiency and enabling effective thermal transfer in a compact space. AL1060 aluminum alloy has excellent corrosion resistance, making it suitable for various chemical environments and extending the lifespan of the tubes ,making it suitable for various chemical environments and extending

L Type Fin Tube ASME SA179 , Fin Material AL 1060 , For Air Cooler L Type Fin L-shaped strp gives optimum contact pressure of the fin foot onto the base tube thus improving the heat transfer efficiency. This also gives considerable corrosion protection to the base tube. MATERIAL COMBINATIONS Core Tube Carbon steels, low-alloy steels, stainless steels, brass, copper, copper-nickel alloys, aluminium bronze, nickel-alloys, as well as exotic grades. Core tubes with extremely thin

ASTM A249 TP304 Base Tube Composition Grade UNS Designation C Mn P S Si Ch Ni Mo Other TP304 S30400 0.08 2 0.045 0.03 1 18.0–20.0 8.0–11.0 ... ... A249 TP304 L Type Wound Fin Tube Strength Excellent corrosion resistance: Stainless steel material has a strong corrosion resistance, suitable for a variety of harsh environments. Efficient heat exchange: The L-fin design increases the surface area and helps to improve heat exchange efficiency, suitable for heating and cooling

Base Tube ASME SA179 Type: Seamless, cold-drawn low-carbon steel tube. Key Properties: Excellent thermal conductivity, good internal corrosion resistance (for clean fluids), smooth internal bore (minimizes pressure drop), high-pressure capability, easily weldable. Typical Applications: Primarily used in heat exchangers, boilers (economizers, superheaters), condensers, and other pressure vessels involving water, steam, oil, or gas on the tube side. Key Properties: Exceptional

A179 L Type Fin Tube Application 1. Heat Exchangers Application: Used in shell-and-tube heat exchangers for efficient heat transfer between fluids. Reason: The finned surface increases the heat transfer area, enhancing overall efficiency. 2. Boilers Application: Employed in economizers and other boiler components to recover heat from flue gases. Reason: Improves thermal efficiency by maximizing heat transfer from hot gases to water or steam. 3. Air Coolers Application:

A179 L Type Fin Tube Application Heat Exchangers: A179 fin tubes are often used in heat exchangers to improve efficiency by increasing the surface area for heat transfer. Cooling Systems: They are utilized in cooling systems, such as air conditioning units and refrigeration systems, to efficiently dissipate heat. Boilers: In boiler systems, fin tubes help maximize heat absorption from the combustion gases. Power Plants: They are employed in power generation plants for heat

ASME SA179 KL Fin Tube Manufacturing Process Base Tube Preparation: A SA179 seamless steel tube is cut to the required length and thoroughly cleaned to remove contaminants like oil, rust, and scale. Fin Winding: The tube is rotated in a high-speed finning machine. Simultaneously, a strip of fin material is fed through a precise guide and wound spirally around the tube's exterior. Mechanical Bonding: For a "KL" type fin, the root of the fin strip has a specific geometric shape

ASME SA179 Wound L Type Finned Tubes for Air Coolers Product Overview ASME SA179 Wound L Type Finned Tubes are designed to maximize heat transfer efficiency in air-cooled heat exchangers operating under moderate temperature conditions. These finned tubes combine seamless ASME SA179 low-carbon steel base tubes with high-conductivity AL1060 aluminum fin strips, which are mechanically wound onto the tube surface using the L Type finning process. During production, the aluminum

ASTM A179 Wound-Fin Tube for Pasta Pre-Dryers and Main Dryers Product Overview ASTM A179 Wound-Fin Tube for Pasta Pre-Dryers and Main Dryers is a heat transfer component designed for air heating systems used in pasta processing and industrial drying equipment. It combines a seamless low-carbon steel tube manufactured to ASTM A179 requirements with helically wound aluminum fins to provide a large external heat transfer surface. The ASTM A179 carbon steel base tube provides

Stainless Steel J Type Wrap On Wound L Finned Tubes ASTM A269 TP304L With AL1100 Fins​ Chemical Composition (%) max Grade C Mn P S Si Cr Ni TP304L 0.035 2.00 0.045 0.030 1.00 18.0-20.0 8.0-13.0 Mechanical Properties Grade Tensile Strength min Yield Strength min Elongation in 2" or 50mm min TP304L 70ksi (485 MPa) 25ksi (170 MPa) 35% ASTM A269 covers seamless and welded austenitic stainless tubing for general corrosion-resistant & temperature service, which is ideal as fin tube

Wound Finned Tubes for Heat Exchangers – ASME SA179 Carbon Steel Tubes Product Overview Wound Finned Tubes manufactured with ASME SA179 carbon steel tubes are widely used heat transfer components designed for improving thermal efficiency in heat exchangers, air heaters, economizers, and industrial cooling systems. The wound fin tube is produced by helically winding a metal strip onto the outside surface of the base tube and mechanically locking the fin foot into a knurled or

High-Efficiency L-Foot Tension Wound Finned Tubes – ASTM A179 Carbon Steel Base with Aluminum Fins Our L-type (L-footed / tension wound) finned tubes combine a robust ASTM A179 seamless carbon steel base tube with high-conductivity aluminum fins. This design delivers excellent heat transfer performance in air-cooled and gas-flow applications while providing cost-effective corrosion protection to the base tube. As a specialized manufacturer and exporter of finned heat