KRONE LSA Module

ABS 10-Pair Disconnection KRONE Module 1. Available in ten-pair configurations with parallel test access or overvoltage protection contact 2. Suitable for use in all xDSL and ADSL2+ circuits 3. Robust long-term environmental stability allows both indoor and outdoor installation Specification: Body Material ABS (UL94V-0) Contact Material Phosphor bronze Silver Plating 0.5 um, 1.25 um, 5 um Insertion Force 40-75 N Pull Out Force F≥ 25N (Axial) F≥ 7.5N (Radial) IDC Life 200

Phosphor Bronze 10-Pair Connection KRONE Module 1. Available in ten-pair configurations with parallel test access or overvoltage protection contact 2. Suitable for use in all xDSL and ADSL2+ circuits 3. Robust long-term environmental stability allows both indoor and outdoor installation Specification: Housing Material ABS (UL94V-0) Contacts Material Phosphor bronze Silver Plating 0.5 um, 1.25 um, 5 um Insertion Force 40~75 N Pull Out Force F≥ 25N (Axial) F≥ 7.5N (Radial) IDC

ABS 10-Pair Disconnection KRONE LSA Module Back Mount The LSA module can be used in any modern network and is fully compatible with all kinds of applications. Wire termination and wire removal are easily opreated with a standard termination tool. The insulation displacement connector is used worldwide to connect and link up cable leads securely in internal and external areas. Specification: Housing Material ABS (UL94V-0) Contacts Material Phosphor bronze Silver Plating 0.5 um

Indoor KRONE Highband 8-Pair Profile Disconnection Module HIGHBAND utilises the silver plated LSA Plus contact principle. This is proven technology which has become the industry standard’ in over 60 countries. The gas tight contacts ensure a reliable and long lasting connection. Specification: Environment for use Indoors or in dry enclosure rated IP54 or greater Maximum relative humidity 93% non-condensing copper conductors 0.40 - 0.65 mm* (26-22 AWG) diameter range (PE, PVC)

10 Pair Krone Highband Disconnection Profile Modules HIGHBAND utilises the silver plated LSA Plus contact principle. This is proven technology which has become the ‘industry standard’ in over 60 countries. The gas tight contacts ensure a reliable and long lasting connection. These modules can be either patched, jumpered and used in a patch by exception configuration. Specification: Environment for use Indoors or in dry enclosure rated IP54 or greater Maximum relative humidity

KRONE LSA Disconnection Module with Screw Terminal This kind of Disconnection Module 2/10 to Screw terminal has 20 position screw terminals soldered to a PCB. Each IDC contact of the module is connected to the relevant contact of 20 position screw terminal through PCB, thus permitting wires upto 2.5 Sq. mm to be connected to the module. Specification: Type Screw-in disconnect pin Compatible With 10 double loaders Content 1 pc Cross Section Max. 2.5 mm² Number of Pins 20 Color

LSA-PLUS Krone HD180 Disconnection Module The LSA-PLUS HD180 connection and disconnection PROFIL module meet the demand for high-density while delivering high-quality connectivity through LSA-PLUS connection technology. The available space is increased by up to 100% over conventional connection systems when using LSA-PLUS HD180 connection and disconnection modules. Specification: Insulation resistance ≥ 5 x 104 MΩ at 500 V Alternating voltage strength 2 kV rms Impulse

10-Pair Profile Type Label Holder Dimension:

10-Pair Krone LSA-PLUS NT Module LSA-PILS NT is a module for all telecommunication distributors which is very easy to work with. It features a high connection density and requires only the traditional LSA-PLUS insertion tool for connection work. The system side is situated at the back at a right angle, so that there is no possibility of accidental access to the system connections. The test access and the jumper contacts are accessible from the front and very clearly arranged.

Test Plug for 4000 4005 Series Splicing Modules Test Plug for 4000 4005 Series Splicing Modules The Test Plug is a module probe designed for 1-pair checking without damaging wire insulation. Its prongs fit the test entry port of all 3M™ MS²™ Modules, while the cord facilitates easy connection to talk blocks or test sets. Key Features Compatible with 3M™ MS²™ Modules 4000, 4005 and 4008 Series Enables 1-pair checking without damaging wire insulation Designed for use with 3M™

28-22 AWG Cable 25 Pair Splicing Module Without Gel 25 Pair Splicing Module Without Gel The 25-Pair Splicing Module without Gel is designed for connecting all plastic communication cables (diameter 0.32 - 0.65mm) through direct, bridge, and multiple connections. Widely used in communication circuits, it features a tuning fork type and sheet joint design for reliable connections. The clear cover module allows for easy pair identification and troubleshooting. Specifications

1 Pair STB Module Without Protection 1-Pair Drop Wire (STB) Module Without Protection is a copper pair connector specifically designed to fit onto 35mm DIN rails, it is designed to connect 2 copper pairs and has common features such as: ● Water proof, sealed IDC termination ● Disconnection and testing facilities ● Tooless termination Specification: Housing Material PC (UL 94V-0) Contacts Conductor Phosphor bronze,surface nickel or silver plated Potting Sealant Epoxy resin

1-Pair Drop Wire STB Module With GDT Protection 1-Pair Drop Wire (STB) Module Without Protection is a copper pair connector specifically designed to fit onto 35mm DIN rails, it is designed to connect 2 copper pairs and has common features such as: ● Water proof, sealed IDC termination ● Disconnection and testing facilities ● Tooless termination ● Equip with 3 pole 230V gas tube arrester with fail-safe protection Specification: Housing Material PC (UL 94V-0) Contacts Conductor

1 Pair STB Module With GDT And PTC Protection 1-Pair Drop Wire (STB) Module Without Protection is a copper pair connector specifically designed to fit onto 35mm DIN rails, it is designed to connect 2 copper pairs and has common features such as: ● Water proof, sealed IDC termination ● Disconnection and testing facilities ● Tooless termination ● 5 point protection plug with 1×3-pole Specification: Housing Material PC (UL 94V-0) Contacts Conductor Phosphor bronze,surface nickel

10-Pair Mini Splicing Module with Gel The 10-pair Communication Cable Connecting Module is designed for connecting all plastic communication cables (diameter 0.32 - 0.65mm) through direct, bridge, and multiple connections. Widely used in communication circuits, this module features a tuning fork type and sheet joint contact design for reliable connections. The clear cover enables easy pair identification and troubleshooting. Key Features: Gel-sealed housing for environmental

22-28 AWG 10-Pair Splicing Module without Gel Product Overview The 10-Pair Splicing Module without Gel is designed for connecting plastic communication cables (0.32-0.65mm diameter) through direct, bridge, or multiple connections in communication circuits. Its tuning fork and sheet joint contact design ensures reliable connections, while the clear cover allows for easy pair identification and troubleshooting. Key Features Designed for 22-28 AWG (0.32-0.65mm) communication

25-Pair Splicing Module with Gel This 25-Pair Splicing Module with Gel delivers reliable performance in extreme conditions, including high humidity and water immersion, while maintaining insulation resistance and circuit integrity. Specifications Housing Material PC (UL 94v-0) with gel sealed Contacts Material Tinned Phosphor Bronze Wire Insertion Force 45N Typical Wire Pull-Out Force 40N Typical Max Insulation Diameter 1.65 mm Cable Style and Wire Diameter 0.32-0.65 mm (28

Plastic KRONE Type Insertion Tool with Wide Handle ● It is so light that suitable for long time using ● Crimping and cut at the same time, convenient and save time ● The precision design of the cutting tools, make it has a long service life ● Scientific and reasonable design, the hooks on both sides of the blade can shrink ● The ergonomic handle design reduce the fatigue degree during your manipulaion Specification: Material Plastic Color White Weight 54 g Function Impact and

PBT 100-Pair KRONE LSA MDF Block For Cross Cabinet 100-Pair KRONE LSA MDF Block for Cross Cabinet, assembled by 10pcs 10-pair KRONE LSA Connection or Disconnection Module, with many accessories: ◇ Dust Cover ◇ Label Holder ◇ Number Flag ◇ U Bracket ◇ Screw & Plug ◇ Cable Fastener ◇ Earth Wire ◇ Back Mount Frame Specification: Housing Material PBT / ABS Contacts Material Bronze with silver plating Connector Type Telephone / Telecom Number of Ways 20 Mounting Type Back Mount

KRONE Lighting Protector Specifications: Direct current break over voltage: 200-260V Resistance to alternating current: 5A / 10A Pulse break over voltage: