ADSS Anchor Clamp

Hot Dip Galvanized Steel Tension Clamp For Figure 8 Cables J-hook The heavy-duty suspension clamp is a versatile, and reliable solution for securing and suspending ADSS cable up to 100 meters. The versatility of the clamp allows the installer to either fix the clamp to the pole using a through bolt or band. Specification: Part Number Cable diameter(mm) Break Load(KN) DW-1095-1 5-8 4 DW-1095-2 8-12 4 DW-1095-3 10-15 4 DW-1095-4 12-20 4 Application: 1. The clamp can be

ADSS Drop Cable Anchoring Clamp for Cable Management The anchoring clamps are designed for a fast, easy and reliable dead-ending of fiber optic cables on access networks with spans up to 100m. A pair of wedges grips the cable automatically within the conical body. The installation does not require any specific tools and the operating time is drastically reduced. Specification: Conduit Box Material Plastic Hook Material Stainless Steel Cable Diameter 4*16- 35 mm² Weight 0.5kg

Power Tension Abc Cable Clamp Essential Power Accessory A power tension clamp is a type of electrical hardware used in overhead power transmission and distribution lines to securely anchor and support conductors or overhead ground wires (OPGW) while maintaining mechanical tension. These clamps are crucial for maintaining the structural integrity of power lines, especially in dead-end (termination) or angle-change scenarios. Feature: 1.1 Compatible with conductor sizes from

Aluminum Alloy Cable Pole Anchor Bracket Dead End Assembly This pole bracket is made of high quality and tensile strength aluminum alloy and processed by die casting manufacturing technology. It can be used both ftth line to tension adss cable clamps and low voltage line to anchor anchoring clamp. The installation of this ftth bracket is very easy, applied on wooden or concrete pole by stainless steel straps and screw on building or wall. Specification: Material Aluminum

Aluminum Alloy Automatic Service Wedge Clamp For Contaminated Areas Wedge clamps are essential tension components in overhead power lines, cable systems, and structural applications. This guide details the breaking load test methodology, standards, and critical evaluation criteria for wedge-type clamps. Frature: 1.1 Designed for Partial Tension Applications. 1.2 Available in Multiple Styles and Bail Lengths. 1.3 Irridated Finish Available for Contaminated Areas. 1.4 Flexible

Stainless Steel Automatic Service Wedge Clamp Wedge clamps are essential tension components in overhead power lines, cable systems, and structural applications. This guide details the breaking load test methodology, standards, and critical evaluation criteria for wedge-type clamps. Feature: 1.1 Designed for Partial Tension Applications. 1.2 Available in Multiple Styles and Bail Lengths. 1.3 Irridated Finish Available for Contaminated Areas. 1.4 Flexible Bail Versions for Use

UPB Aluminum Alloy Metal Pole Bracket Outdoor FTTX Fiber Optic UPB universal pole bracket is made of aluminum alloy and provides for high mechanical resistance. It's unique patented design offers an universal fitting covering all installation situations on wooden, metal or concrete poles. Specification: Material Aluminum Alloy Cable Diameter 8-14mm Breaking Force 12KN Color Silver Features: 1.1 Multi-use product; enables the cross-arm fastening, simple or double anchoring,

FTTH Figure-8 Cables Suspension Clamp Hot Dip Galvanized For Installation The suspension clamps are designed to provide an articulated suspension for figure-8 cables with steel or dielectric insulated messenger on access network with spans up to 90m. Its unique patented design has been developed to offer an universal hardware fitting covering all suspension cases on wooden, metal or concrete poles. With straight grooves and a reversible system, these clamps are compatible

Galvanized steel Draw Hook For Fiber Optic Cabling Draw Hook for fiber optic cabling, used to hanging cable. The body is made of Galvanized steel ( hot-dip galvanized for durable in the rural environment and keep good reliability), Easy to install and operate, Effective and time saving for cabling. Specification: Material Galvanized steel Weight 120 g Size:

Galvanized Steel Fiber Optic Electric Cable Storage Assembly On Steel Pole ADSS fiber cable storage bracket is a device used to securely hold and organize fiber optic cables. It is typically designed to support and protect cable coils or spools, ensuring that the cables are stored in an organized and efficient manner. The bracket can be mounted on walls, racks, or other suitable surfaces, allowing for easy access to the cables when needed. It can also be used on poles to

Hot Galvanized Steel Multiple Drop Wire Cross-Arm Bracket for FTTH Pole It is made from carbon steel with hot-dipped zinc surface processing, which can last a very long time without rusting for outdoor purposes. It is widely used with SS bands and SS buckles on poles to hold accessories for telecom installations. The wire Cross-arm bracket is a type of pole hardware used to fix distribution or drop lines on wooden, metal, or concrete poles. The material is carbon steel with a

Fasten Figure 8 Cable Pole Line Hardware Cable Fitting Figure 8 cable clamp is designed to securely fasten fiber optic cables of the figure 8, and its tension load is 2 KN. The diameter of the outer supporting element of the fixed fiber optic cable can be from 4 to 8 mm. The clamp is recommended to be used on intermediate supports of overhead lines, communications, urban electrical facilities, elements of buildings and structures, etc. Designed for suspension of self

Stainless Steel Wire Rope Clip Cable Clamp Stainless steel wire rope clips are fittings used to make an eye or join two cable or wire rope ends together. They are a simple fitting that can be installed in the shop or in the field. There are three basic types of steel wire rope clips – Drop forged, malleable iron and fist grip types. The intended application for the wire rope or cable should determine which type to use. Forging wire rope clips, the main material is the choice

Power Fittings Electrical Fittings Eye Chain Link The twisted chain link is used to link clamps to insulator, or to link insulator and ground wire clamps to tower arms or subjection structures. Link fittings have special type and common type in accordance with mounting condition. The special type includes the ball-eye and socket-eye linking with insulators. The common type is usually pin connected type. They have different grades according to the load and are exchangeable for

OPGW ADSS Stockbridge Vibration Damper For High Voltage Overhead Line The anti-vibration hammer is designed to reduce the vibration of the wire due to wind. The high voltage overhead line has a high pole position and a large span. When the wire is subjected to wind, it will vibrate. When the wire vibrates, the working conditions of the wire suspension are the most unfavorable. Due to multiple vibrations, the wire will undergo fatigue damage due to periodic bending. When the

Fixed Aluminum ADSS Suspension Clamp ADSS (All-Dielectric Self-Supporting) suspension units are a crucial component of any fiber optic network. They provide the necessary support for ADSS fiber cables, ensuring that they remain secure and in place even under extreme weather conditions. At Tangent Support, we offer high-quality suspension units that are designed to provide reliable and long-lasting support for your network. Our suspension units are made from durable materials

All-Dielectric Self-Supporting Cable Preformed Suspension Clamp ADSS (All-Dielectric Self-Supporting) suspension units are a crucial component of any fiber optic network. They provide the necessary support for ADSS fiber cables, ensuring that they remain secure and in place even under extreme weather conditions. At Tangent Support, we offer high-quality suspension units that are designed to provide reliable and long-lasting support for your network. Our suspension units are

Fiber Optical ADSS Fastening Clamp for Pole Corner Fastening fixture for tower: a series of fastening fixture for tower is designed according to the dimension of tower material at the hanging point of fiber optic cable to realize the connection and installation of tension-resistant wire clip and suspension wire clip with iron tower Fastening fixture for rod: according to the cable hanging point rod diameter design series of fastening fixture for rod, realize the connection

Pole Fittings Anchor U Type Shackle Clamp U Type Bow Shackles often used as an overhead power line and substation to connect insulator strings or steel strands to the tower, and is connected by pins, eye holes and bolts. Anchor U shackle clamp are malleable iron or casting steel, these cotter pins are stainless, the other parts are hot-dip galvanized. They are used to connect insulator and electric power fittings on ultra-high voltage transmission line. Specification: Color

FTTH Drop Cable Fitting Draw Hook C-Type Aluminum Alloy Pole Bracket C-Type Hook has the principle of a round route for fixing the cable accessory, this helps to secure it as tightly as possible. Allows installations of FTTH clamp drop wires directly attached to clamp. Anchor FTTH optical fiber clamps and others drop wire cable brackets are available either separately or together as assembly. Specification: Shape pole bracket Color Silver Material Aluminum Alloy Application