Water Soluble Packaging Film

Cold Water Soluble Film Product Type: APFN Discription: Cast film, non-embossed, transparent. Application: For packaging Thickness: 30microns Width: 120mm ~ 140mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 30 microns 36 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 25MPa T.D. 20MPa Elongation (GB

Cold Water Soluble Film Product Type: APFN Discription: Cast film, Embossed, translucent. Application: Packaging Film for Pesticide, Agricultural Chemicals Thickness: 80microns Width: 500mm ~ 600mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 80 microns 98 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M

Size: 60*120mm, 70*140mm, 80*160mm, 120*160mm, 180*250mm, 330*450mm Thickness from 35 microns to 50 microns; Film is translucent, Embossed. Cold water soluble flim. 公司标准检测单 成品:常温水溶膜/袋 尺寸:120mm X 160 mm X 35 um S/N 测试说明 单位 公司标准 测试结果 1 水溶性检测35um*20cm*5cm薄膜样品,在1000ml 25℃ 水中搅拌 断落 秒 ≤30 　18~22 溶解 ≤120 　110 2 热封线拉伸强度 横向 Mpa ≥5 10 纵向 Mpa ≥7 20 3 延伸率 横向 % ≥180 210 纵向 % ≥100 130 4 平均厚度 微米 35±2 34.5 5 尺寸误差 长度 毫米 ±5 ±2 宽度 毫米 ±5 ±2 6 厚度偏差 正数 微米 +5 +2 负数 微米 -5 -2 7 热封温度(速度60只/分钟) ℃ 200

Width from 1200mm to 1800mm; Thickness from 30 microns to 140 microns; Film is translucent and transparent; Cold water soluble flim, Hot water soluble film, both can be produced.

Cold Water Soluble Film Product Type: APFN Discription: Cast film, non-embossed, transparent. Application: For packaging Reinforcing Fibers Thickness: 50microns Width: 450mm ~ 650mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 30 microns 60 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa T.D.

Cold Water Soluble Film Product Type: APFN Discription: Cast film, non-embossed, transparent. Application: For packaging Reinforcing Fibers Thickness: 35microns Width: 120mm ~ 500mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 30 microns 42 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 35MPa T.D.

Cold Water Soluble Film Product Type: APFN Discription: Cast film, Embossed, translucent. Application: Packaging Film for Pesticide, Agricultural Chemicals Thickness: 35microns Width: 120mm ~ 500mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 35 microns 42 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M

COA of Liquids Packaging Film Product Description Film Type: PVOH film for Liquids packaging Film description: Clear PVOH film, solution cast, cold water soluble Thickness: 76μm Width: 150mm~370mm Length: 500m / reel TEST ITEM STANDARD TEST RESULT Tensile Strength M.D. ≥30MPa 47MPa Tensile Strength T.D. ≥30MPa 49MPa Elongation M.D. ≥250% 240% Elongation T.D. ≥250% 280% Dissolution time at 20 ℃ 800ML water (Both side of film contacts water with stirring.) ≤100Sec 66Sec Average

1. Characteristics of water-soluble packaging bags: 1) Safe and non-toxic: Water soluble film is safe, non-toxic, non irritating, and easily degradable to humans. After being dissolved in water, the final degradation products are carbon dioxide and water, which can be absorbed by the human body and excreted through metabolism; 2) Environmental friendly and soluble: The water-soluble film is colorless and transparent, which can quickly dissolve in water to release the contents

Cold Water Soluble Film Product Type: APFN Discription: Cast film, transparent Application: Packaging Film for Liquids, Detergents Thickness: 80microns Width: 120mm ~ 600mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 80 microns 98 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa T.D. 35MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, transparent Application: Packaging Film for Liquids, Detergents Thickness: 80microns Width: 120mm ~ 600mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 80 microns 98 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa T.D. 35MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, transparent Application: Packaging Film for Liquids, Detergents Thickness: 80microns Width: 120mm ~ 600mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 80 microns 98 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa T.D. 35MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, transparent Application: Packaging Film for Liquids, Detergents Thickness: 80 microns Width: 120mm ~ 600mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 80 microns 98 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa T.D. 35MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, Embossed, translucent. Application: Packaging Film for Pesticide, Agricultural Chemicals Thickness: 50microns Width: 460mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 50 microns 60 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, Embossed, translucent. Application: Packaging Film for Pesticide, Agricultural Chemicals Thickness: 50microns Width: 460mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 50 microns 60 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, transparent Application: Packaging Film for Liquids, Detergents Thickness: 80microns Width: 120mm ~ 600mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 80 microns 98 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M.D. 45MPa T.D. 35MPa

Cold Water Soluble Film Product Type: APFN Discription: Cast film, Embossed, translucent. Application: Packaging Film for Pesticide, Agricultural Chemicals Thickness: 35microns Width: 120mm ~ 500mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 35 microns 42 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M

Cold Water Soluble Film Product Type: APFN Discription: Cast film, Embossed, translucent. Application: Packaging Film for Pesticide, Agricultural Chemicals Thickness: 35microns Width: 120mm ~ 500mm Typical Properties @ 23 + 2 ℃ Temperature, 50 + 5% RH. The film was kept in oven at 60~65℃ for 3 hours, then returned to test condition. Water content of PVA film: 10~12% Weight per SQM(density at 1.22 g/cc) for 35 microns 42 g/sqm Performance Tensile Strength (GB/T 1040.3-2006) M

Thickness: 25 microns, 30 microns, 35 microns Color: White, Natural, Blue, etc. Width: 115mm, 120mm, 130mm, customer designed. Length: 500 meter/reel Rate of water content: 5% Clear embossed effect. Product Description: The elongation at break of this product ranges from 200-300%, which means that it has the ability to stretch without breaking. This characteristic makes it ideal for use in packaging applications that require flexibility. The printability of this product is

Thickness: 25 microns, 30 microns, 35 microns Color: White, Natural, Blue, etc. Width: 115mm, 120mm, 130mm, customer designed. Length: 500 meter/reel Rate of water content: 5% Clear embossed effect. Product Description: The elongation at break of this product ranges from 200-300%, which means that it has the ability to stretch without breaking. This characteristic makes it ideal for use in packaging applications that require flexibility. The printability of this product is