Power Adapter Connector
CCTV Power Over Ethernet 5V POE Splitter 5V 2.4A with Micro USB Adapter
Product Description Descriptions: 12W micro-USB Power over Ethernet PoE up to Remote 328 - 492ft (100 - 150m) via Ethernet cable,802.3af PoE switch or 48v injector is needed Power Output Port: 5V 2.4A Micro-USB Power Plug Compatible with 44-57V DC voltage, overvoltage protection Support the IEEE 802.3af the Power over Ethernet PoE Switch, 48V Unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, 48v injector Suitable for Android Tablets, Dropcam, Raspberry Pi -
5.5 2.1mm/2.5mm Female DC Power Adapter Connector for Contact Material Brass Gold Plated
Product Description High Quality Very Durable DC Female & Male Connector 2.1 x 5.5mm CCTV Camera DC Power Plug Connector No electrical tap, No splicing, no crimping, but only a small screw driver. Easier for camera installation, save time and more securer cable connection. Packaging & Shipping Our Services 1,Promotely reponse and fast production leadtime 2,Best pre-sale & after-sale service 3,Reliable products quality and good reputation 4,High manufacturing capacity 5.ODM
Network Transmission Black PoE Splitter Cable Adapter IEEE802.3af 12V DC for IP Camera
Product Description Description:Single Port 100M PoE Splitter 15.4W PoE splitter, it is an economical and practical PoE remote power equipment base on IEEE802.3af/at standard. It can separate the power and data via cable transmission. Proper matching use with poe switch or PSE injector which meet standard IEEE802.3af,Provides power and data at the same time for the terminal device does not support PoE. Specifications:Connector Type: 1x 10/100Mbps RJ45 portNetwork Medium: Cat5
2.4a Current Black Power Over Ethernet Kit for Raspberry Pi 3 Board Injector Splitter
Product Description Feature: 10/100/1000Mbps(Gigabit) Ethernet Active PoE Splitter Micro USB Plug for Raspberry Pi 3B+(3B Plus) ASUS Tinker Development Board 48V to 5V 2.4A (Max. 12watt) Compliant with IEEE802.3af With 2.5KV isolation Note: This POE splitter must be connected with POE Switch or 48V POE Injector so that it can supply power to a connected Raspberry Pi or other Micro USB Port IN DC 5V cameras: Compatible IEEE 802.3af/802.3at standard POE switches(safty power
Splitter RJ45 Female to RJ45 Male Power Out for 12V Waterproof POE Injector Cable
Product Description • Injector: RJ45 Male + Power In to RJ45 Female• Splitter: RJ45 Female to RJ45 Male + Power Out• Passive PoE - means that input and output voltage are equal.• Works with all DC powered non-PoE devices• Support Range from 3-57V• Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power. • Uses industry standard 5.5mm x 2.1mm power plugs• Can work up to 100ft (depending on
Power Over Ethernet Passive POE Injector Splitter Adapter Kit 5V/12V/24V Made
Product Description Features:Passive PoE- means that input and output voltage are equal.Transforms Non PoE devices to PoE enabled.Supports 5V, 12V, 24V, 48V.Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug.Use with IP security camera, wireless access point and other devices.Can work up to30-40 metres/100-130ft (depending
C-Power POE Splitter Injector Splitter with 30-40m Transmission Distance 53g Weight
Product Description Features:Passive PoE- means that input and output voltage are equal.Transforms Non PoE devices to PoE enabled.Supports 5V, 12V, 24V, 48V.Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.PoE injector and splitter kit with 5.5 * 2.1 mm DC jack / plug.Use with IP security camera, wireless access point and other devices.Can work up to30-40 metres/100-130ft (depending
Convenient RJ45 Male Power In to RJ45 Female POE Injector and Adapter Splitter Kit
Product Description Injector: RJ45 Male + Power In to RJ45 Female Splitter: RJ45 Female to RJ45 Male + Power Out Passive PoE - means that input and output voltage are equal. Works with all DC powered non-PoE devices Supports 5V, 12V, 24V, 48V Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power. Uses industry standard 5.5mm x 2.1mm power plugs Can work up to 150ft (depending on the
48V to 12V 5V 2.4A Active PoE Splitter for CCTV IP Camera IEEE802.3 Compliant in Black
Product Description Description:Single Port 100M PoE Splitter 15.4W PoE splitter, it is an economical and practical PoE remote power equipment base on IEEE802.3af/at standard. It can separate the power and data via cable transmission. Proper matching use with poe switch or PSE injector which meet standard IEEE802.3af,Provides power and data at the same time for the terminal device does not support PoE. Specifications:Connector Type: 1x 10/100Mbps RJ45 portNetwork Medium: Cat5
Black Passive Power Over Ethernet Rj45 Poe Adapter Injector Splitter for -40°C 60°C
Product DescriptionCable Ethernet Adapters Poe Splitter Injector Power Supply 12-48v Ip Camera Pass The Complete Passive Power Over Ethernet SET Contains Two Pieces - INJECTOR And SPLITTER. It Is Suitable For Using With Products That Basically Do Not Support Power Over Ethernet. Passive Power Over Ethernet SET Is Applicable For Wide Range Of Network Products Such As Access Points, Routers, IP Cameras, Modems, Switches, Embedded Computers Or Other Network Devices. Passive
Home Security Active POE Splitter 48V to12V 1A-2A IEEE802.3af with Ethernet Module
Product Description RJ45 female INPUT Port:Support the IEEE 802.3af/802.3AT the Power over Ethernet PoE Switch Support 48V-52V Unsolicited Power Over Ethernet PoE Switch Support 48V-52V Unsolicited Power Over Ethernet PoE Adapter Specification: Compliant with IEEE802.3af 15.4WIsolation: 2.5kVPower Input: DC44~57V Power Output: DC12V Data&Power INPUT Port: from RJ45 femaleData Output Port: RJ45 MalePower Output Port: 5.5x2.1mm DC Power PlugData Transfer Rate: 10/100/1000MbpsDe
DC Power Cord POE Cable Splitter Injector for Telecommunication IP Camera
Product Description If your POE switch voltage more than 15V, please reduced voltage first and then use the this POE splitter together, otherwise it may burn the camera or other load equipment. Features: Passive PoE- means that input and output voltage are equal. Transforms Non PoE devices to PoE enabled. Supports 5V, 12V, 24V, 48V. Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.
-Made 48v 10/100Mbps PoE Splitter Adapter Cable for Network Power Camera 12V 1.25A
Product Description 10/100M PoE Splitter with IEEE 802.3af Standard & 12V 1A Output & DC48-57V Input (Power Over Ethernet, PoE Power Receiver) . Features: Support the IEEE 802.3af the Power over Ethernet standard. Support 10/100Mbps data transmission. PoE Splitter receiving end supports variety of voltage of 44V-57V transfer. Provide 12V 1A power to adapt to a variety of small network equipment. Circuit isolation protection, effective protection of electrical equipment. High
2.1x5.5mm Male Female DC Power Jack Adapter Connector Plug For Camera made of Copper
Product Description Features: Simply & Professional appearance for power cabling Easier for camera installation, save time and more securer cable connection No electrical tap, No splicing, no crimping, but only a small screw driver 2.1 x 5.5mm Male power plug connector Internal diameter of the plug: 2.1mm External diameter of the plug: 5.5mm Packaging & Shipping Our Services 1,Promotely reponse and fast production leadtime 2,Best pre-sale & after-sale service 3,Reliable
48V to 5V 2.4A PoE Splitter ABS Ethernet Module for Hassle-Free Power Over Ethernet
Product Description 12W micro-USB Power over Ethernet PoE up to Remote 328 - 492ft (100 - 150m) via Ethernet cable,802.3af PoE switch or 48v injector is needed Power Output Port: 5V 2.4A Micro-USB Power Plug Compatible with 44-57V DC voltage, overvoltage protection Support the IEEE 802.3af the Power over Ethernet PoE Switch, 48V Unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, 48v injector Suitable for Android Tablets, Dropcam, Raspberry Pi - Micro-USB
Gray C-Power CCTV Camera DC Power Jack Connector ADAPTER for Gray Installations
Product Description This DC to Terminal Block adapter is made for special industrial application e.g. for connecting single wires with open cable heads. It also can be used in the hobby area for example for model railroading. Therefor you can connect various devices with suitable DC power connector to the adapter in order to supply your devices individually with power (depending on the requirements of device). Features• Easy to connect 3528 / 5050 / 5630 / Single color to
Copper 12V Female Connector Plug 5.5*2.1mm Adapter Plug For LED Flexible Strip Tape
Product Description This DC to Terminal Block adapter is made for special industrial application e.g. for connecting single wires with open cable heads. It also can be used in the hobby area for example for model railroading. Therefor you can connect various devices with suitable DC power connector to the adapter in order to supply your devices individually with power (depending on the requirements of device). Features• Easy to connect 3528 / 5050 / 5630 / Single color to
48V 12V IEEE 802.3af Compliant Active POE Splitter Adapter for CCTV 205mm Wire Length
Product Description The POE Splitter allows you to run Ethernet cables from a POE Switch over long distance, and then split the POE signal into a separate data signal and 12Vdc power sources in order to run non-POE device.Specification:• Input...................................RJ45 female• Output................................RJ45 male and male DC jack 5.5*2.1mm• Data rate............................10/100Mbps• Size...................................82x28x23.5mm• Wire length
Passive Power Over Ethernet Adapter for IP Camera Supports 24V Black/White Optional
If your POE switch voltage more than 15V, please reduced voltage first and then use the this POE splitter together, otherwise it may burn the camera or other load equipment. Features:Passive PoE- means that input and output voltage are equal.Transforms Non PoE devices to PoE enabled.Supports 5V, 12V, 24V, 48V.Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.PoE injector and splitter
Securely-Designed C-Power DC Power Jack Plug Screwless Quick Wire Connector 5.5x2.1mm
Product Description This DC to Terminal Block adapter is made for special industrial application e.g. for connecting single wires with open cable heads. It also can be used in the hobby area for example for model railroading. Therefor you can connect various devices with suitable DC power connector to the adapter in order to supply your devices individually with power (depending on the requirements of device). Features• Easy to connect 3528 / 5050 / 5630 / Single color to