Integrated Circuit IC

Professional-grade CCD linear image sensor featuring 7450x3 pixel resolution with RGB color readout. Compact 4.7μm pixel size delivers high detail capture across 0°C to +60°C operating range. Surface-mount CLCC-32 package with 10V power supply for industrial scanning and inspection applications.

High-performance 1.3 megapixel CMOS image sensor with 815fps frame rate and 4.8μm pixel size. Features NIR sensitivity, wide -40°C to +85°C operating range, and LVDS interface. Ideal for industrial machine vision, inspection systems, and demanding imaging applications requiring reliable performance.

Low voltage operational amplifier with 4 channels, 1.8-12V power supply range, and 2.2MHz gain bandwidth. Features 80mA output current per channel, -40°C to +105°C operating temperature, and excellent noise performance. Ideal for industrial and automotive applications requiring precision signal conditioning.

Professional power management IC with ground fault protection, operating at 6-12V input range and 25μA supply current. Features QFN-16 SMD package, -40°C to +85°C temperature range, and humidity sensitivity. Ideal for industrial safety applications requiring reliable fault detection and energy-efficient performance.

Compact synchronous boost regulator delivering 3.3V output at 200mA with 3 MHz switching frequency. Features 2.3V-3.2V input range, -40°C to +85°C operating temperature, and SMD/SMT installation. Ideal for portable electronics and IoT applications requiring efficient power management in minimal space.

The NCP1075STAT3G from onsemi is a compact AC/DC converter IC featuring 65 kHz switching frequency, 72% maximum duty cycle, and isolated flyback topology. This surface-mount power management chip delivers efficient conversion for low-power applications with reliable performance and industry-standard quality.

High-performance 3-phase inverter IGBT module featuring 600V voltage rating and 10A current capacity. Built with rugged short-circuit protection and SLLIMM technology for compact power solutions. Operating temperature range of -40°C to +125°C ensures reliability in demanding industrial environments. Through-hole SDIP2F-26 package design.

STMicroelectronics TS4041DILT-1.2 precision shunt voltage reference delivers 1.225V output with 1% accuracy and 150 PPM/°C temperature coefficient. Features micropower operation (65μA min), industrial temperature range (-40°C to +85°C), and compact SMD packaging for reliable performance in measurement systems and portable devices.

STMicroelectronics SPV1040T high-efficiency solar battery charger IC with 1.65A output current and 2V-5.2V voltage range. Features wide 300mV-5.5V input, extended -40°C to +125°C temperature operation, and compact TSSOP-8 SMD package for reliable solar energy harvesting applications.

STMicroelectronics TS3022IYST dual-channel analog comparator features 1.8V to 5V operation, 38ns response time, and 73μA supply current. With rail-to-rail inputs, push-pull outputs, and AEC-Q100 qualification, this IC delivers precision performance for industrial and automotive applications.

Interface type Parallel Storage capacity 4 mbit Working voltage is 4.5V~5.5V Standby current 5uA Erase life is 100,000 times. Write cycle time (TW) 70 ns Block erase time (tBE) - Data retention-TDR (year) 20 years Working temperature-40℃ ~+85℃ Functional characteristic power-on reset Need to purchase electronic components can contact Tel: +86 13112483680.

Synchronous dynamic random access memory (SDRAM) for commodity catalogue Storage capacity of 256Mbit Clock frequency (fc) 166MHz Working voltage is 3v ~ 3.6v. Automatic precharge of functional characteristics; Automatic refresh; High speed clock synchronization; Automatic column address generation Working temperature-40℃ ~+85℃ Need to purchase electronic components can contact Tel: +86 13112483680.

Amplifier number two-way Single supply voltage 36V Dual power supply (vee ~ VCC)-18V ~-2.25V; 2.25V~18V Input offset voltage (Vos) 1uV Input offset voltage temperature drift (vostc) 1nv/℃ Gain bandwidth product (GBW) 550kHz Rail-to-rail output Slew rate (Sr) 0.2v/us Common mode rejection ratio (cmrr) is 140db. Input voltage noise density (en) 20nv/√ Hz @ 1khz Input bias current (Ib) 100pA Static current (Iq) 100uA Output current 30mA. Input offset current (Ios) 100pA Working

Catalogue eMMC Interface type eMMC 5.0 Storage capacity 4GB Working temperature-25℃ ~+85℃ Sequential reading speed 152 MB/s Sequential writing speed is 14 MB/s NAND working voltage (VCCF) is 2.7V ~ 3.6V. The working voltage (VCCQ) of the controller is 2.7V ~ 3.6V; 1.7V~1.95V Functional features Hardware reset function; Bad block management function Need to purchase electronic components can contact Tel: +86 13112483680.

Need to purchase electronic components can contact Tel: +86 13112483680. Catalogue operational amplifier Number of amplifiers 4 Maximum power supply width (vdd-VSS) 32v. Gain bandwidth product (GBW) 1.2MHz Input offset voltage (Vos) 3mV Input offset voltage temperature drift (Vos TC) - Slew rate (Sr) 500 v/ms Input bias current (Ib) 20nA Input offset current (Ios) 50nA Input voltage noise density (en) 35nv/√ Hz @ 1khz Common mode rejection ratio (CMRR) is 80dB. Input offset

Need to purchase electronic components can contact Tel: +86 13112483680.

Catalogue DC-DC power supply chip Functional type buck type The working voltage is 2.25V~5.5V Output voltage- Output current 6a Switching frequency 300 khz ~ 4 MHz Working temperature-40℃ ~+125℃ @ (TJ) Synchronous rectification is Number of output channels 1 Topological step-down type Static current (Iq) 75uA Switch tube (built-in/external) built-in Adjustable output type Functional characteristics light load and high efficiency mode; External compensation; Frequency

Catalogue audio power amplifier Power amplifier type class d power amplifier Speaker channel number two channels Output power 15Wx2@8Ω Total harmonic distortion+noise (THD+N) 0.1% Static current (IQ) 35 mA Signal-to-noise ratio 102dB Power supply ripple rejection ratio (PSRR)-70dB The efficiency is 90% Number of input channels- Functional ESD protection; Filter-free architecture; Enable/disable function; Integrated PLL；; Overvoltage protection Working voltage is 4.5V~26V.

Catalogue DC-DC power supply chip Functional type buck type The working voltage is 4.5V~17V Output voltage 768 mv ~ 7 v Output current 3a Switching frequency 580kHz Working temperature-40℃ ~+125℃ @ (TJ) Synchronous rectification is Number of output channels 1 Topological step-down type Static current (Iq) - Switch tube (built-in/external) built-in Adjustable output type Functional characteristics light load and high efficiency mode; Wave by wave current limiting; Overcurrent

Catalogue attitude sensor/gyroscope Axis x, y, z of accelerometer Acceleration measuring range (MAX) ±16g Gyroscope axial- Gyroscope range (MAX) - Sensor type accelerometer The output number is 8bit；; 10bit； 12bit Interface type I2C；; SPI The working voltage is 1.71 v ~ 3.6 v. Cache size 0.2KB Standby current 500nA Working temperature-40℃ ~+85℃ Functional characteristic motion event detection Need to purchase electronic components can contact Tel: +86 13112483680.