Exhibition Regulations

Annex (II) : Nantong International Convention and Exhibition Center construction safety responsibility During the construction of Nantong International Convention and Exhibition Center, the construction unit shall strictly abide by the Fire Protection Law of the People's Republic of China, the National Electrical Equipment Safety Technical Code, the Regulations on the Safety Management of Large-scale Mass Activities of Jiangsu Province, the Regulations on the Construction

Viii. Deduction standard for construction deposit If any construction unit or individual violates the provisions of "Nantong International Convention and Exhibition Center Construction Safety Regulations" and refuses to implement the safety management requirements put forward by the venue, Nantong International Convention and Exhibition Center has the right to deduct part or all of the construction deposit in accordance with the following standards. For units or individuals

7. Lifting safety regulations 1. The operator must undergo professional safety technical training, pass the examination, and hold the certificate. 2. Warning signs should be set up at the hoisting site, and special personnel should be set up to monitor. 3. Do not work in the open air when there is heavy snow, fog, heavy rain and strong wind above 6. 4. Before operation, the operation unit should check the lifting machinery, rigging, lifting gear, safety devices, etc., to

4. Fire safety requirements 1. Smoking, open flame operation, paint, thinner, gasoline, pressure vessels and other inflammable and explosive dangerous materials are strictly prohibited in the venue building. 2. The width of the main channel of the exhibition should not be less than 5m, and the width of the auxiliary channel should not be less than 3m. No unit or individual is allowed to occupy or block the fire escape channel and the entrance and exit in any way. 3. All

Six, the use of lifting equipment should pay attention to the following matters: 1. The construction unit should have professional personnel to operate the lift when using it. Before the operation, the potential hazards in the construction area should be carefully checked, and the construction work can only be started after the safety is confirmed. 2. Before using the lifting platform, the operator should comprehensively check the machine and equipment to ensure that the

Water and electrical requirements 1. The basic power supply of the venue shall be three-phase five-wire system. 2. Lighting fixtures and electrical appliances shall comply with national safety standards and fire safety requirements, and shall be constructed in accordance with GB 19517-2009 National Technical specification for Electrical equipment safety. 3. The power connection should be operated by professional electricians, and must be licensed to work, and non-professional

Third, construction requirements 1. When the conference area enters the building to transport goods, it should be entered from entrance C23. Only cargo elevators are allowed, and passenger elevators and escalators are prohibited. 2. When transporting goods, the construction unit shall take protective measures for the door of the office to avoid bumping and damaging the door body. 3. Before entering the hall, carpet or plastic film should be laid in the room and then put the

Second, construction personnel requirements 1. Construction personnel must wear safety helmets correctly when entering the construction site and take necessary safety protection measures. 2. Construction personnel must enter the construction site with their own construction certificates. 3. When the construction personnel are drunk or ill, it is strictly forbidden to enter the construction site. 4. When the construction personnel ascend the height of more than 2m, there

First, home construction safety management responsibilities 1. The organization is sound and the personnel is complete (one post and two responsibilities). 2, must be in accordance with 5000 square meters of not less than 2 people equipped with full-time security officers and with red armbands, inspection of safety work. 3. Arrange special personnel to supervise and manage the loading and unloading of goods in the freight yard to ensure the civilized, safe and orderly loading

Annex (III) : Nantong International Convention and Exhibition Center construction safety regulations According to the relevant laws and regulations of the State and the Regulations on the Safety Management of Large-scale Mass Activities of Jiangsu Province, Nantong International Convention and Exhibition Center, as a large-scale conference and exhibition venue, has the obligation to perform the safety management responsibilities conferred by law, and fully maintain the safety