New Energy Solutions

Cabin Domain Whole Machine Temperature Control Aging Test Equipment Product aging description The total dimensions of the aging cabinet are: length 5000mm, width 1400mm, and height 2200mm The product size is 500*300*200mm. Each trolley can hold 8 products. One set of aging cabinet is equipped with 4 trolleys and can age a total of 32 products The dimensions of the trolley are 890mm in length, 600mm in width and 1650mm in height. Technical parameters: 1 Power Aging Cart —

High-temperature Burn In Equipment For Vehicle-mounted BMS Battery Management SystemThe PLC should be equipped with a network port. An overcurrent fuse should be connected in series between the power supply and the product. The vehicle docking should be equipped with a floating device. After reaching the position, there should be a locking structure and a detection signal for reaching the position. 32A leakage switch with undervoltage trip. The heating time from room

Water-cooled Inductor New Energy Micro-domain Controller Aging Test EquipmentThe entire set of equipment adopts a combination of 2 aging cabinets and 1 electrical control cabinet. Dimensions: length 6000mm, depth 1400mm, height 1800mm. The product placement position is approximately 350mm high. The product area is designed in 3 layers, with 2 products placed on each layer, totaling 6 products on 3 layers. 2 cabinets are combined to hold 12 products. Load zone The 6-layer

High-temperature Water-cooled Burn-in Aging Test Cabinet For Automotive Control Microcontrollers The overall system architecture adopts a simple version of the 1-to-4 MCU. Each cabinet has two slots at the top and bottom, which are independently controlled. The upper and lower waterways are used in series The upper and lower adjacent slots are regarded as one cavity, with independent temperature control. Each cavity can meet the heat dissipation power of 5KW. During aging, it

Burn And Test For Obc Power Supply For New Energy Vehicles Test Aging Cabinet The overall design consists of one aging frame and two trolleys All four wheels (3 inches) of the trolley are swivel wheels. Their structural dimensions are strictly designed in accordance with customer requirements to ensure consistency at the connection between the cabinet and the trolley The AGV trolley is equipped with a position detection switch when reversing. There is a locking device between

Energy-saving Aging Solution For EDS Vehicle Drive Assembly Products Burning Tester (2CH/20kW temperature-controlled type) Main functions The structure is solid and durable, and the appearance is elegant and generous The panel control is convenient, simple, intuitive and easy to use The universal wheel design makes it convenient to move the layout Separate water and electricity areas to ensure electrical safety The waterway is at the bottom, and the leakage protection is

Burn And Test For 6.6kw Water-cooled Inductive Water Temperature OBC/MCU Power Supply The system is composed of 1 control cabinet, 2 aging cabinets and 1 water temperature cabinet. Two three-phase inductor cabinets The control cabinet is equipped with built-in units such as a computer and power distribution The aging cabinet is equipped with temperature control functions, waterways, load zones, product zones and other units The water temperature cabinet has 8 inlets and 8

New Energy Vehicle IO Module & Controller Temperature-controlled Burn And Test SystemThe appearance is industrially designed with 2.0mm thick cold-rolled steel plate welded together, which is firm, reliable, elegant and generousVisible high-temperature double doors, double-layer high-temperature explosion-proof glass, and each operation area on the floor is equipped with a lighting system.The single aging cabinet is equipped with universal casters, allowing for free

Burn-in Test Of Temperature-controlled EC Fan Drive Module Performance parameters Skills requirement Burn-in cabinet size(mm) L2200*W1200*H2050 Rated working voltage 380Vac Rated frequency 50Hz Rated working current 8.3A Power frequency withstand voltage for 1 minute 2000Vac AC input specifications 460Vac/8.3A AC output specifications 364Vac/8.35Amax Master switch 4way 100A Input switch 24way 16A Output switch 24way 16A IP rating IP20 Noise

High Temperature Burn-in Test Of BMS Board Of New Energy Four-wheel Electric Vehicles Motor Controller The test parameters are set according to the product parameters Performance parameters Skills requirement Burn-in cabinet size(mm) L1600*W1100*H1600 Rated working voltage 380Vac Rated insulation voltage 690Vac Rated frequency 50Hz Rated working current 32A Power frequency withstand voltage for 1 minute 2500Vac UUT input specifications 12VDC/5Amax*36passageway UUT output

Typical Burn-in Test System Of Household Photovoltaic Storage And Grid-connected Integrated Unit Performance parameters System System structure 1 control cabinet + 2 burn-in cabinets Overall size 5100*1500*2050mm Total floor area 5100*2500mm(Including operation area) Total input voltage Three-phase five-wire system 220Vac (rated) Total input current 60A Total input power 25kW Application ambient temperature 0-40℃ Application environment humidity 0-95% Fire protection

Typical Burn-in Test System For Small String Inverters Performance parameters System System structure 1 control cabinet + 2 burn-in cabinets Overall size 5100*1500*2050mm Total floor area 5100*2500mm(Including operation area) Total input voltage Three-phase five-wire system 220Vac (rated) Total input current 300A Total input power 160kW Application ambient temperature 0-40℃ Application environment humidity 0-95% Fire protection requirements Materials meet UL 94V0 rating

Notebook Lithium Battery Charging And Discharging burning-in Test Equipment Scope of Application This specialized equipment is engineered for comprehensive lithium battery module burn-in testing systems, providing reliable performance validation for electric vehicle applications. Performance Parameters Parameter Specification Requirements Burn-in Cabinet Size L2600 * W1320 * H1980 (mm) Distribution Cabinet Size L600 * W1320 * H1980 (mm) Electrical Design Incoming line: three

New Energy Vehicle Electric Drive Controller (MCU) Typical Burn-in Tester Advanced burn-in testing system designed specifically for New Energy Vehicle Electric Drive Controllers (MCU), ensuring reliability and performance validation through comprehensive environmental and electrical testing. System Configuration & Specifications Category Project Content System System structure 1 control cabinet + 2 aging cabinets + 1 water temperature cabinet Overall size 6900*1600*2050mm

Typical Burn-in Test System For New Energy Vehicle Power Supply Assembly OBC Comprehensive burn-in testing solution designed specifically for On-Board Charger (OBC) power supply assemblies in new energy vehicles, ensuring reliability and performance under various operating conditions. System Performance Parameters Category Project Content System System structure 1 control cabinet + 2 aging cabinets + 1 water temperature cabinet Overall size 6900*1600*2050mm Total floor area

New Energy Automobile BMS Controller Board Burn-in Test Equipment Advanced burn-in test equipment designed specifically for new energy automobile BMS controller boards, ensuring reliability and performance through comprehensive testing protocols. Key Features Software-controlled load parameter settings with real-time monitoring of voltage, current, and power parameters Parallel channels in CC load mode for product power expansion capability Built-in automatic protection with

Automotive Electronics Motor Control Unit Motor Controller Burn-In Test Equipment Performance Parameters System System structure: 1 control cabinet + 2 aging cabinets + 1 water temperature cabinet Overall size 6900*1600*2050mm Total floor area 6900*2500mm (Including operation area) Total input voltage Three-phase five-wire system 220Vac (rated) Total input current 250A Total input power 150kW Application ambient temperature 0-40℃ Application environment humidity 0-95% Fire

Battery Module Burn-in Equipment, Electric Vehicle Lithium Battery Aging Cabinet Advanced burn-in testing system designed specifically for lithium battery modules used in electric vehicles, ensuring reliability and performance through comprehensive aging tests. Scope of Application This specialized equipment is engineered for comprehensive lithium battery module burn-in testing systems, providing reliable performance validation for electric vehicle applications. Performance

New Energy Pure Electric Vehicle BMS Module Aging Test Experimental Cabinet Performance Parameters Skills Requirement Specification Burn-in cabinet size L1600*W1100*H1600 (mm) Rated working voltage 380Vac Rated insulation voltage 690Vac Rated frequency 50Hz Rated working current 32A Power frequency withstand voltage for 1 minute 2500Vac UUT input specifications 12VDC/5Amax*36passageway UUT output specifications Static burn-in without load Number of burn-in stations 36 (6

Maximum Power Point Tracking Solar Controller Burn-In Test Equipment Factory Professional burn-in test equipment designed for solar controllers with maximum power point tracking (MPPT) technology, ensuring product reliability and performance. Performance Parameters Burn-in Cabinet Structure Specifications Trolley size (mm) L2050 * W1250 * H2050mm (size of a single Burn-in cabinet) Number of trolley layers 4 layers, product area depth 400mm (6 Burn-in positions per layer)