Thermal Spray Wire

Product Description CuAl11Fe3 thermal spray wire is a high-aluminum bronze alloy containing approximately 11% aluminum and 3% iron.It is designed for arc spray and flame spray processes , forming high-hardness, wear-resistant and erosion-resistant coatings with strong adhesion and long service life.Compared with standard aluminum bronze (CuAl7 / CuAl8 / CuAl10), CuAl11Fe3 provides higher hardness, better abrasion resistance and improved erosion resistance , making it suitable

Product Description CuAl9Ni5Fe3Mn2 thermal spray wire is a premium nickel aluminum bronze (NAB) alloy containing approximately 9% aluminum, 5% nickel, 3% iron and 2% manganese.It is designed for arc spray and flame spray processes , forming high-strength, wear-resistant and seawater-corrosion-resistant coatings with excellent adhesion and long service life.This alloy offers outstanding load-bearing capacity, cavitation resistance and anti-galling performance , making it an

Product Description CuAl8Ni2 thermal spray wire is an aluminum bronze alloy containing approximately 8% aluminum and 2% nickel. It is designed for arc spray and flame spray processes , producing dense, wear-resistant, corrosion-resistant coatings with strong adhesion and long service life.Compared with CuAl7 or CuAl8, this alloy provides higher hardness, better load-bearing capacity, excellent sliding performance, and superior corrosion resistance , making it ideal for marine

Product Description CuAl8Ni2Fe2Mn2 thermal spray wire is a high-performance aluminum bronze alloy containing approximately 8% aluminum, 2% nickel, 2% iron, and 2% manganese.It is designed for arc spray and flame spray processes , producing dense, wear-resistant, corrosion-resistant coatings with excellent adhesion and long service life.Compared with CuAl7 or CuAl8, this alloy offers higher hardness, superior load-bearing capacity, excellent sliding performance, and outstandin

TAFA 79B NiAl 80/20 Thermal Spray wire Metco 405 Introduction NiAl80/20 thermal spray wires can be use as bond coatings and requires minimal surface preparation. Bond strengths in excess of 9000 psi can be achieved onm grit blasted surface. It show good resistance to high temperature oxidation and abrasion, and excellent resistance to impact and bending. NickelAluminum 80/20 is widely used as bond coat for subsequent thermal spray topcoats and as a one step build up material

High Quality Thermal Spray Alloy Molybdenum Wire Prices Product Description Composition of molybdenum wire Grade The impurity content is not more than % Fe Ni Al Si Mg C N O Mo-1 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008 Mo-2 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02 Specifications of molybdenum wire Molybdenum Wire Types Diameter (inch) Tolerance (%) Molybdenum Wire for EDM 0.0024" ~ 0.01" ±3% wt Molybdenum Spray Wire 1/16" ~ 1/8" ±1% to 3% wt Molybdenum Wire 0.002"

Babbit metal thermal spray wire used for arc and flame spray systems Babbit metal Wisdom offers a variety of Sn-based alloy wires for use as coating feedstock material for the electric arc wire spray processes. These materials are also abrasion resistant and antifriction. Generally providing well compressive strength, fatigue strength, bearing capacity, plasticity and impact strength, anti-seizing, thermal conductivity, corrosion resistant as well as little thermal expansion.

Babbitt metal thermal spray wire for arc and flame spray systems Introduction Babbitt wire is a special high grade, tin-based alloy that is manufactured exclusive for thermal spray. Babbitt alloy coating are particularly suitable for high speed and heavy duty bearing surfaces that required coatings of the highest possible quality, especially for critical applications. The coatings are ductile, low in oxides and exhibit a bright,metallic appearance. Typical Uses and Applicatio

Good Quality NiAl 95-5 Thermal Spray Wires Nickel Aluminum 95/5 Thermal Spray Wire | Self-Bonding Alloy for Metal Surface Coating Good quality NiAl 95-5 Thermal Spray wires NiAl 95/5: Thermal Spray Wire (Sp 95/5, SD 95/5, Ni95Al5) NiAl 95/5 is an austenitic nickel-aluminium alloy (NiAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings. Typical applications for NiAl95/5 are bond coats, as protective coatings against high-temperature

Tafa 97 Mxc Thermal Spray Wire Product descriptions from the supplier TAFA 97 MXC thermal spray wire TAFA 97 MXC is a solid wire specifically designed for arc spray systems. It is a titanium and tungsten carbide alloy in an amorphous matrix. TAFA 97 MXCproduces a hard, abrasive and corrosion resistant coating, with a service environment of up to 1000° F. TAFA 97 MXC is used in a wide variety of industrial high wear applications. Packaging & Shipping Packaging:Products are

Product descriptions from the supplier Metco Metcoloy 2 thermal spray wire Metco Metcoloy 2 thermal spray wire Product name SS 420 stainless steel flat bar cold rolled Grade 201,202,301,303,304,304L,305,316,316L,321,410,416,420,430... 1.4301, 1.4306, 1.4845, 1.4401, 1.4371, 1.4597,1.4541, etc Standard ASTM, EN,DIN,JIS Max bending 2.5mm/m Thinkness 3mm-30mm Width 10mm-180mm Length 2-6m, or as customer's requirement Surface pickled,bright or black Usage 1.Widely used in the

Product descriptions from the supplier TAFA 60T/60E 13% Chrome Steel thermal spray wire Technical Comparison Table Property TAFA 60T TAFA 60E (13% Chrome Steel) Base Alloy Iron-based alloy Iron-based with ~13% Chromium Chemical Composition Fe balance, trace C, Si, Mn Fe balance, Cr ~13%, C ~0.1–0.2%, Si, Mn Hardness (Coating) ~ HRC 20–30 ~ HRC 35–45 Coating Characteristics Tough, adherent, machinable coating Harder, more wear & corrosion resistant surface Bond Coat Requiremen

Product descriptions from the supplier Sulzer Metco Metcoloy 2/TAFA 60T/60E 13% Chrome Steel thermal spray wire Product Description – Metcoloy 2 / TAFA 60T / TAFA 60E Thermal Spray Wire Metcoloy 2, TAFA 60T, and TAFA 60E (13% Chrome Steel) are high-performance thermal spray wires designed for arc spray and flame spray systems. Each wire offers distinct advantages tailored for surface restoration, wear protection, and corrosion resistance across a wide range of industrial

Product descriptions from the supplier Pure Aluminum themal spray wire euqal to Tafa01T, Metco Aluminum , PMET699 for Arc spray or flame spray Product Description Product Name Pure Aluminum themal spray wire euqal to Tafa01T, Metco Aluminum , PMET699 for Arc spray or flame spray Material Al>99.7% or Al>99.9% Color metal bright Standard For thermal spray coating Grade Al>99.7% or Al>99.9% Size 1.6 mm, 2.0 mm, 3.17 mm Used Thermal spray wire, Arc thermal spray Products Show

Product Description CuAl10Fe thermal spray wire is a high-aluminum bronze alloy containing approximately 10% aluminum and a small amount of iron. It is designed for thermal spraying to provide heavy-duty wear-resistant and corrosion-resistant coatings .Compared with CuAl7 and CuAl8, CuAl10Fe offers higher hardness, improved load-bearing capacity, and superior sliding and corrosion resistance , making it ideal for marine equipment, shafts, bearings, valves, and industrial

Product Description CuAl8 thermal spray wire is an aluminum bronze alloy wire containing approximately 8% aluminum, designed for thermal spraying to produce heavy-duty wear-resistant and corrosion-resistant coatings .Compared with CuAl7, CuAl8 provides higher hardness, improved load-bearing capacity, and superior corrosion resistance , making it ideal for marine equipment, pump components, shafts, and industrial machinery .It is suitable for arc spray and flame spray

Product Description CuAl7 thermal spray wire is an aluminum bronze alloy wire containing approximately 7% aluminum, designed for thermal spraying to produce wear-resistant and corrosion-resistant coatings .CuAl7 coatings offer excellent hardness, high load-bearing capacity, and superior corrosion resistance , making them ideal for marine equipment, pump components, shafts, and industrial machinery .It is suitable for arc spray and flame spray processes , producing dense

Product Description CuSi3Mn1 thermal spray wire is a silicon bronze alloy wire containing approximately 3% silicon and 1% manganese, designed for thermal spraying to produce wear-resistant and corrosion-resistant coatings. Compared with pure copper coatings, CuSi3Mn1 provides higher strength, better hardness, and improved resistance to abrasion while maintaining good corrosion resistance.It is suitable for arc spray and flame spray processes , producing uniform coatings with

Product Description CuSn1 thermal spray wire is a tin bronze alloy wire containing approximately 1% tin, designed for thermal spraying to provide corrosion-resistant and wear-resistant coatings. Compared with pure copper coatings, CuSn1 coatings offer improved hardness and better resistance to wear while maintaining good electrical and thermal conductivity.The wire is suitable for arc spray and flame spray processes , producing uniform, dense coatings with good adhesion for

Product Description Pure Copper thermal spray wire is a high-purity copper wire used for thermal spraying to produce conductive and corrosion-resistant coatings. Copper coatings offer excellent electrical and thermal conductivity, good corrosion resistance, and strong adhesion. The wire is suitable for arc spray and flame spray processes , and is widely used for surface restoration, conductive layers, and anti-corrosion protection in industrial applications. Key Features High