Small Meter

ISO 13320 Dry Process Automatic Laser Grainsize Analyzer 1. Product Introduction LR-N2020 is a dry process automatic laser particle size meter, which is widely used in powder industry. Our company has designed different templates for different industries. Customers can choose cement template, abrasive template and so on according to their needs. Advanced optical path design: LR-N2020 uses concentrating Fourier transform testing technology to ensure that the shortest focal

AL-DR-300Y High-frequency portable X-ray DR Imaging Equipment The Smart-EVO series of potentiostatic portable X-ray machines adopt high-frequency switching technology, which ensures extremely stable X-ray output and relatively shortened exposure time, significantly enhancing work efficiency. Product advantages It is not sensitive to irregular fluctuations in the power supply system and has low power consumption Stable energy output and a wider voltage output range Fully

AL-DR-250A Variable Frequency Portable X-ray DR Imaging Device High Frequency X Ray Instrument System composition Portable X-ray flaw detector (variable frequency or high frequency) Digital flat panel detector Image processing software Laptop Automatic detection tooling Wireless transmission device (optional) Product features High detection efficiency This system adopts digital DR Imaging, directly outputs electronic films, saves the time for film washing and evaluation, and

Point Light Source Detector Tester For Ordinary Plate Glass 1. Introduction DG-5A point light source detector is a special equipment used to detect ordinary plate glass. I. Working principle Ordinary plate with a point light source at a certain distance, a certain Angle of illumination, the glass rib will produce some bright lines on a plane behind the glass plate, the brighter the line, the heavier the glass rib, The instrument adopts this principle, using the light source

Tempered Glass Flatness and Image Deformation Tester 1. Introduction GDT-1 tempered glass flatness and image deformation tester has obtained the national utility model patent certificate, patent number: ZL202021001936.3. The instrument uses an optical non-contact probe to scan the surface topography of glass, measure the bow bending and waveform bending lines of glass, and calculate the peak and valley value (PV value), light focus value (OP value), edge warping of each wave.

Optical Distortion Detector For Automobile Glass 1. Introduction GJB-1 automobile safety glass optical distortion detector is designed and manufactured according to the national standards GB9656 and GB5137.2, which is used to detect the optical distortion of automobile glass. The instrument consists of a slide projector (including a zoom lens), a special slide and a screen. 2. Technical Parameters Slide projector BRAUNE, Germany Zoom lens BRAUN ULTRALIT PL, Germany Power

Float Glass Iris Detector Test machine Device For Float Glass 1. Introduction RBW-1 float glass iris detector is used to detect float glass iris according to the technical requirements of the newly revised float glass national standard. The instrument is composed of heating device, annealing device and observation device. 2. Technical Parameters Rated voltage 380V Rated power 9KW Temperature control range Room temperature ~1150ºC Heating element HRE Sample bin size 400*300

Radiation Resistance Detector Uv resistance Tester I. Use NF-5 type radiation resistance detector is testing equipment, suitable for automobile laminated glass, building laminated glass and fireproof glass and other kinds of laminated glass UV resistance test, widely used in deep processing glass enterprises and all levels of quality supervision and inspection departments. Ii. Equipment structure and working principle This instrument uses ozonless quartz tube type medium

Boiling Resistance Test Box Tester Test the Heat Resistance of Laminated Glass 1. Introduction I. Use ZF-5 type boiling resistance test box is according to the national standard GB15763 "laminated glass" and manufacturing testing equipment. The equipment is mainly used to test the heat resistance of laminated glass. It is suitable for architectural laminated glass and automobile laminated glass Put the sample in a boiled water tank and keep it for 2 hours to observe whether

Visible Light Transmitter Reflectivity Haze Tester VLT VIST 1. Equipment introduction This instrument uses tungsten halogen lamps, parallel light tubes, integral spheres, photocells, etc. to test the ratio of luminous flux before and after passing through the glass. Through a special filter, the spectrum of the tungsten halogen lamp is filtered out from ultraviolet and infrared components, and the spectrum is corrected to the relative radiation spectrum of the D65 light

Photovoltaic Glass Spectral Transmittance Tester 1.Introduction It is used to test the transmittance of solar photovoltaic glass. It is also suitable for float glass, hollow glass, tempered glass, laminated glass, coated glass, car glass and other transmittance test. I. Equipment Introduction This instrument consists of a worktable, a spectrometer and a control computer. The size of the table is 2000*1300mm. The height of the worktable is 800mm. The surface of the table is

Benchtop Spectral Transmission Instrument Spectral reflector Spectral Chromatic Aberration Tester 1. Equipment introduction This instrument can test the transmittance and color values of all transparent or translucent flat plate objects, and can also test the reflectance and color values of all transparent or opaque flat plate objects, and can calculate excellent differences. 2. System features 1. Anti-ambient light interference 2. Can work continuously for a long time 3. Use

Online Transmittance Chromatic Aberration Testing System Machine Tester 1. Equipment introduction The GOT-1 type float coated glass online transmittance and chromatic aberration detection instrument is an instrument used to test the transmittance and chromatic aberration of float glass, online coated glass and offline coated glass online coated glass, and can scan and detect the transmittance of glass online. This system consists of a transmission system, a testing system, a

Automatic Glass Curvature Tester Test machine for Various Flat Glass 1. Equipment introduction This equipment has applied for a national utility model patent, patent number: ZL202022245692.X. The equipment uses an optical non-contact probe to scan the glass surface, measure and calculate the bending value of the glass, and draw the bending curve of the sample to be measured. BOW-1 glass curvature automatic tester is a brand new device for detecting glass curvature. The system

1. Equipment introduction The BD-5 type bending tester is designed and manufactured according to the national standard GB11614-2009 "Floating Glass". It is used to test the bending of various glass products. It is suitable for a series of glass products such as float glass, tempered glass, etc. 2. Instrument Principles This instrument uses a straightened thin steel wire as a reference, and uses a precisely collimated guide rail as a reference. The dial meter is installed on

Glass Gdge Light Detector Test Machine Tester 1. Equipment introduction The M-LED glass edge light detector is an auxiliary device designed in accordance with the requirements of the national standard GB11614-2009 "Flat Glass" and is used to detect the appearance defects of the flat glass. It is also suitable for the appearance defect detection of tempered glass, hollow glass, laminated glass, automotive glass and other various glasses. The glass edge light detector uses a

Float Glass Side Light Detector 1. Use The CM-5 side light detector is designed in accordance with the requirements of the national standard GB11614-2009 "Floating Glass". It is used in conjunction with the appearance detector to test the number and size of various defects of float glass. It is a necessary quality inspection equipment for float glass manufacturers. 2. Principle The CM-5 side light detector is equipped with an iodine tungsten lamp in the closed light box.

Glass Appearance Detector Tester Test for Glass Bubbles Scratches Sand Particles 1. Usage The WG-5 appearance detector is designed and manufactured according to the technical requirements of the national standard GB11614-2009. It is used in conjunction with the side light detector to detect the appearance defects of the glass such as bubbles, scratches, sand particles, bumps, wires, pits, inclusions, etc. of the glass. 2. Instrument Principles The WG-5 appearance detector

Glass Density Measuring Instrument Sinking and Floating Density Meter Comparator 1. Use The MD-5 type sinking and floating comparison density meter is a density testing instrument designed and manufactured according to the national standard GB/T14901-2008 "Glass Density Determination-Sagging and Floating Comparison Method". It can be used to measure the density values of glass or other non-porous solids of 1.1 to 3.3 g/cm3, and can also be used to measure the apparent density

Embossed Glass Appearance Detector Tester for Flat Glass 1. Use WG-6 type embossed glass appearance detector is designed and manufactured according to the technical requirements of the National Standard GB11614-2009 for use in Testing device for detecting the appearance defects of ordinary flat glass and embossed glass, used in conjunction with edge light detectors, can detect bubbles, scratches, sand particles, bumps, wire channels, Appearance defects such as pockmarks and