Plastic Testing Equipment

Environmental Climate Aging Test Equipment meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample temperature uniformity ≤ 2 ℃ (after stabilizing for

High-Humidity Thermal Resistance Test Cabinet meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample temperature uniformity ≤ 2 ℃ (after stabilizing

High & Low Temperature Humidity Testing Chamber High temperature and high humidity test chamber meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample

Mid-Scale Fire Resistance Test Furnace Other requirements -The furnace top shell is insulated with low insulation materials -The combustion system is capable of generating standard heat within the furnace chamber, Time temperature curve with a duration of up to 240 minutes -The furnace wall lining/insulation layer should be made of ceramic fiber modules or equivalent materials that meet the testing standards in terms of temperature and density -The burner slag should be made

Mid-Scale Laboratory Fire Furnace Used to Conduct Fire Endurance Tests on Construction Components and Building Assemblies Other requirements -The furnace top shell is insulated with low insulation materials -The combustion system is capable of generating standard heat within the furnace chamber, Time temperature curve with a duration of up to 240 minutes -The furnace wall lining/insulation layer should be made of ceramic fiber modules or equivalent materials that meet the

Medium Fire Resistance Test Furnace for Construction Components Other requirements -The furnace top shell is insulated with low insulation materials -The combustion system is capable of generating standard heat within the furnace chamber, Time temperature curve with a duration of up to 240 minutes -The furnace wall lining/insulation layer should be made of ceramic fiber modules or equivalent materials that meet the testing standards in terms of temperature and density -The

Photovoltaic module rupture testing machine Meets standard: IEC61730-2 MST32 Test objective: To determine the risk factor of scratches or punctures on tempered glass if the component ruptures Impact bag specifications: The impact bag is a leather bag with a shape and size similar to the hanging bag. The bag is filled with lead bullets/shot put (diameter 2.5 to 3.0mm, i.e. 7.5 bullets) to the required weight. Figure 1 shows the design of the impact bag. The outer surface of

Climate Endurance Test Chamber meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample temperature uniformity ≤ 2 ℃ (after stabilizing for half an hour)

High temperature and high humidity test chamber High temperature and high humidity test chamber meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample

Conical Radiant Heat Flux Fire Calorimeter Unit Structural characteristics 1.1. Integrated design of 19 inch standard cabinet, beautiful and elegant, easy to operate, avoiding interference factors such as vibration 1.2 Cone Heater - Within a truncated cone, 230V, 5000W, heat output ranging from 0 to 120 kW/m2 1.3. The entire testing process is controlled by a computer with a 19 inch touch screen 1.4. It has functions such as automatic ignition, automatic timing, automatic gas

Meets standard: IEC61730-2 MST26 Test objective: To evaluate the conductive material of the external insulation layer of the component. In the event of a reverse current fault and before the overcurrent protector installed in the circuit disconnects, the battery and interconnect bars of the component will be forced to generate heat to consume energy. This experiment is used to determine the component's ability to withstand ignition and fire in this state. Features: -The

Impulse voltage tester Meets standard: IEC61730-2 MST14 Test purpose: This test is used to verify the ability of solid insulation materials in components to withstand overvoltage caused by atmospheric environment. It also involves overvoltage states caused by low-voltage equipment switches. Equipment Introduction: It is specifically designed for testing the pulse voltage of solar cell modules (solar panels). The generator can generate a surge voltage waveform of 1.2/50 μ s

Moisture and Heat Resistance Testing Machine meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample temperature uniformity ≤ 2 ℃ (after stabilizing for

Humidity and Temperature Cycling Test Equipment meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load) Sample temperature uniformity ≤ 2 ℃ (after stabilizing

Temperature and Humidity Environmental Test Chamber High temperature and high humidity test chamber meet the standard IEC61215-2 MQT13 IEC61215-2 MQT21 IEC61730-2 MST53 IEC62804 Test objective: To determine the ability of components to withstand long-term moisture infiltration effects Main technical parameters: Temperature range RT~150 ℃ Temperature deviation ≤± 1.0 ℃ (full load) Temperature fluctuation ≤ ± 0.5 ℃ (full load) Uniformity of box temperature ≤ 2 ℃ (full load)

Mid-Scale Fire Exposure Test Furnace for Measuring Fire Resistance and Fire Endurance Properties of Building Elements Other requirements -The furnace top shell is insulated with low insulation materials -The combustion system is capable of generating standard heat within the furnace chamber, Time temperature curve with a duration of up to 240 minutes -The furnace wall lining/insulation layer should be made of ceramic fiber modules or equivalent materials that meet the testing

Medium-Sized Fire Test Furnace Designed for Fire Endurance Performance Testing of Various Building Structural Elements Other requirements -The furnace top shell is insulated with low insulation materials -The combustion system is capable of generating standard heat within the furnace chamber, Time temperature curve with a duration of up to 240 minutes -The furnace wall lining/insulation layer should be made of ceramic fiber modules or equivalent materials that meet the

Cylinder type dynamic/static mechanical load testing machine 1. Meet the standard: IEC61215-2 MQT16 IEC61215-2 MQT20 IEC61730-2 MST34 IEC TS 62782:2016 2. Product Introduction: The cylinder type mechanical load testing machine is designed and manufactured in accordance with relevant standard clauses such as IEC61215-2 IEC62782 TS Ed.1. The mechanical load testing machine is used to verify the ability of components to withstand static and dynamic loads under wind, snow, or

GB/T 8627 ASTM D2843 Smoke Density Testing Instrument TTech-GBT8627 for Electric Bicycle Materials Product Introduction: In a fire, people are suffocated by smoke or unable to escape due to the inability to see the way, so accurate testing of the smoke density of materials is crucial in preventing fires; The smoke density tester for building materials meets the technical indicators and requirements specified in the national standard GB/T8627-2007. It can be used to measure

Fire penetration seal fire resistance test furnace Technical parameters 1. Implementation standard: New version of GB 23864-2023 "Fireproof Sealing Materials". 2. Main purpose of the equipment: It can conduct fire resistance tests on all vertical sealing materials except for gap sealing materials. 3. Equipment highlights: - Small footprint, easy installation; -Equipped with sealed furnace walls and set up test openings; -Meet the fiber temperature rise curve and power