Flash Point Tester

SH8019B Steam Method Existent Gum Tester ASTM D381 3-Hole Metal Bath Fast Uniform Heating for Jet Fuel Test PRODUCT DESCRIPTION Product Specifications Attribute Value Number of test holes 3 Test hole size φ 51mm × 70mm Temperature display digital display Flow display displayed by pressure gauge Host size 650 * 550 * 430mm Weight 28kg Product Description SH8019B Actual Gel Tester (Steam Jet Method) The SH8019B actual gum tester is designed and manufactured in accordance with

SH9168B Auto Vacuum Distillation Tester German Imported Parts Multi-Standard Compliant Product Description SH9168B All-Auto Vacuum Distillation Test Unit The SH9168B vacuum distillation test machine is a dedicated lab device engineered to meet China’s GB/T 9168 and ASTM D1160 specifications. It gauges the boiling ranges of petroleum samples during full or partial vaporization. Equipped with heating and cooling systems, this all-auto distillation unit uses an imported liquid

SH107 Auto Interfacial Tester Platinum Ring 0.1mN/m Precision Temp Calibration for Oil Liquid Testing Model SH107 fully automatic interfacial tensiometer is fabricated in compliance with GB/T6541 standards. It applies the platinum ring testing method to gauge surface tension of all kinds of liquids at liquid-gas boundaries, as well as the oil-water interfacial tension between mineral oil and pure water under non-equilibrium testing environments. Built around a single-chip

SD3536S Semi-automatic Open Flash Point Tester The SD3536S Semi-automatic Open Cup Flash Point Tester is designed and manufactured in accordance with **GB/T 3536-2008 *Petroleum Products—Determination of Flash Point and Fire Point—Cleveland Open Cup Method***. It is suitable for determining the open cup flash point of fuel oils and other petroleum products with flash points below 79 °C. It also supports the flash point test of plasticizers as specified in **GB/T 1671-2008**.

PRODUCT DESCRIPTION SH6531 Petroleum Sediment Tester, Dual Test, GB/T6531 & ASTM D473 Compliant SH6531 Petroleum precipitate tester is according to the People's Republic of China standard GB/T6531 "Determination of precipitate in crude oil and fuel oil" and ASTMD 4870 regulations, applicable to the test method according to GB/T6531 standard to determine the content of precipitate in crude oil and fuel oil. This instrument is a double structure, can carry out two samples at

SD3536S Semi-automatic Open Flash Point Tester SD3536S Semi-automatic open flash point tester is in according to the standard of the People's Republic of China GB/T3536-2008 "petroleum products determination of flash point and burning point Cleveland KaiKouBei act the requirements stipulated in the design and manufacture, is suitable for the determination of the fuel oil and oil products outside the mouth flash point is below 79 ℃, flash point and burning point also support

The SK101 Automatic Open-Cup Flash Point Tester is equipped with an atmospheric pressure correction function and an automatic ignition system. Featuring a large-screen LCD display, the instrument is fully computer-controlled throughout the entire testing process. It integrates a host of automated functions, including automatic temperature rise control, automatic ignition and scanning, automatic flash point detection and result locking, result printing, and automatic gas

Gravimetric Method Feed Crude Fat Analyzer ST-06 Soxhlet Extraction Principle PRODUCT DESCRIPTION Crude Fat Analyzer ST-06D is base on the Soxhlet extraction principle and integrates functions: soaking, extraction, leaching, heating, condensation and solvent recovery. Sealed metal bath heating with automatic temperature control, ensuring uniform heating and safe operation, Six samples can be tested at the same time, and optimal temperature can be selected according to the

Diesel oil above 40 ℃, transformer oil, cold pressed oil flash point SD261 closed flash point meter SD261 closed mouth flash point meter is designed and manufactured in accordance with the requirements of the national standard GB/T 261-2008 "determination of flash point Binsky-Martin closed mouth cup method". It is suitable for the determination of the flash point of petroleum product samples with a flash point above 40℃ by the method specified in the GB/T 261-2008 standard.

SD3536 Semi Automatic Open Flash Point Tester ASTM D92 Room Temp～400 ℃ Scale Division 2℃ SD3536 Semi-automatic open flash point tester is in according to the standard of the People's Republic of China GB/T3536-2008 "petroleum products determination of flash point and burning point Cleveland KaiKouBei act the requirements stipulated in the design and manufacture, is suitable for the determination of the fuel oil and oil products outside the mouth flash point is below 79 ℃,

Diesel oil above 40 ℃, transformer oil, cold pressed oil flash point SD261 closed flash point meter SD261 closed mouth flash point meter is designed and manufactured in accordance with the requirements of the national standard GB/T 261-2008 "determination of flash point Binsky-Martin closed mouth cup method". It is suitable for the determination of the flash point of petroleum product samples with a flash point above 40℃ by the method specified in the GB/T 261-2008 standard.

ASTM D93 Fully Automatic Closed Flash Point Tester For Petroleum Products SH105BS SH105BS Automatic closed cup flash point tester adopts microcomputer technology and large screen LCD LCD display. The instrument warms up according to the standard method, automatic lifting, automatic ignition, automatic display, automatic locking flash point value, automatic printing results. After the test, it can automatically cool down and realize the full automation of the working process.

SH21789 Abel Flash Point Tester Closed Mouth Cup Method ISO13736 SH21789 Automatic Abel closed flash point tester is designed and manufactured according to the requirements of the national standard GB/21789 "Determination of flash point of petroleum products and other liquids (Abel closed cup method)" and ISO13736. Automatic Abel Closed Cup Flash Point Tester Automatic Closed up Flash Point Testing Machine Oil Flash Point Tester Digital Abel Flash Point Apparatus ISO13736

Fully Automatic Cleveland Open Flash Point Tester ASTMD92 Lubricating Oil Rt ～ 400 ℃ SH106B automatic open flash point tester is designed and manufactured according to the standard GB/T 3536 and ASTMD 92 "Determination of flash point and ignition point of petroleum products (Cleveland open cup method)". Instrument according to the standard method of heating, automatic rise and fall, automatic ventilation, automatic ignition, automatic display, automatic locking flash point

ASTM D93 Pensky-Martens Closed Cup Flash Point Tester for Petroleum The SH105B closed flash point automatic tester is a scientifically developed product featuring microcomputer technology and large LCD display. This instrument automatically performs heating, ventilation, ignition, display, flash point value locking, and result printing according to standard methods. After testing, it automatically cools, achieving full automation of the work process with accurate measurement,