Lubricating Oil Testing Equipment

SH127 Grease adhesion tester SH127 grease adhesion tester, the instrument in accordance with the SH/T0469 standard manufacturing, suitable for the determination of grease adhesion to metal surface. The working temperature of the instrument can be raised from room temperature to 200℃. In this range, the working temperature can be set arbitrarily according to the needs of the work. After setting, the automatic control system in the box keeps the temperature constant within the

# SH123 Automatic Liquid‑Phase Rust Tester **Compliant with GB/T 11143 and ASTM D665** ## Product Description The SH123 Automatic Liquid‑Phase Rust Tester is manufactured in strict accordance with GB/T 11143. It is mainly applied to evaluate the rust‑preventing performance of inhibited mineral oils and turbine oils under water‑contaminated conditions. This liquid‑phase rust tester is also suitable for testing the rust resistance of hydraulic oils and circulating oils. Widely

# SH129 Lubricating Grease Roll‑Stability Tester **Compliant with ASTM D1831 & SH/T 0122** ## Product Description The SH129 Lubricating Grease Roll‑Stability Tester is built in accordance with ASTM D1831 and SH/T 0122 standards. A prescribed amount of grease sample is loaded into the test drum and subjected to a 2‑hour test run at ambient temperature. The worked cone penetration of the lubricating grease is measured before and after the test procedure. This instrument

Product Titles for Selection SD4929A Double-Hole Oil Bath Grease Dropping Point Tester | Compliant with ASTM D566 Portable Oil Bath Grease Dropping Point Tester ASTM D566 Lab-Grade ASTM D566 Lubricating Grease Dropping Point Apparatus Product Description Model SD4929A Grease Dropping Point Tester is developed and produced in full compliance with GB/T 4929 Test Method for Dropping Point of Lubricating Grease. It performs grease dropping point tests as specified in this

SH129 Grease Roll Stability Tester complies with ASTM D1831 and SH/T 0122 standards. Test procedure: Fill a specified quantity of grease sample into the tester and run the roll test for 2 hours at ambient temperature. Compare the cone penetration values of the grease before and after the test. This instrument measures the consistency variation of lubricating grease after roll shearing, so as to evaluate the mechanical shear stability of grease products. Standard Product

ASTM D1831 Lubricating Grease Roll Stability Tester Stainless Steel Roller Digital Temp Controller Testing Equipment PRODUCT DESCRIPTION The SH129 Lubricating Grease Roll Stability Tester conforms to ASTM D1831 and SH/T0122 standards. Its operating principle is as follows: a specified quantity of test sample is placed in the drum tester and operated for 2 hours at ambient temperature, after which the worked penetration values of the lubricating grease are measured both before

GB/T 511 Hydraulic Oil Mechanical Impurity Analyzer Product Overview The SH101C automatic mechanical impurity content analyzer (with balance) is designed according to the requirements of the national standard GB/T511 "Determination of Mechanical Impurities in Petroleum Products and Additives (Weight Method)". It is suitable for determining the content of mechanical impurities in various light and heavy oils, lubricants, and additives in petroleum products. Method Summary

Gear Oil Fully Automatic Constant Temp Density Meter 0.0001～1.999g/Cm³ ASTM D4052 SH102D Automatic Density Tester The SH102D fully automatic constant temperature petroleum densitometer is suitable for measuring liquid density and relative density. This instrument measures liquid density based on the principle that the oscillation frequency differs when the double U-shaped tube is filled with different media. It complies with GB/T 2013-2010, GB/T 29617-2013, and ASTM D4052

Gear Oil Automatic Trace Moisture Meter Electrolytic Current 0-400mA ASTM D6304 SH103A Automatic Trace Moisture Meter The SH103A automatic micro water analyzer is a precision instrument designed for detecting moisture content in petroleum products. Featuring high sensitivity, accuracy, and reproducibility, it offers Chinese menu navigation with intuitive operation and energy-efficient design. Suitable for petroleum, chemical, power, pharmaceutical, and related industries, it

Transformer Oil Low Temp Closed Flash Point Tester 0 ～ +350℃ Compressor Refrigeration ASTM D93 SH105C Low Temperature Closed Flash Point Tester The SH105C low temperature closed flash point tester is designed and manufactured in accordance with the requirements of the standard GB/T 261-2008 of the People's Republic of China. Automatic heating, rising/falling, ventilation, ignition, display, and flash point value locking Automatic printing of test results Automatic cooling

ISO 3679 Low Temp Flash Point Tester -30℃ to +80℃ Rapid Equilibrium Closed Cup Mode Product Overview SH105D Balance Method Low Temperature Closed Flash Point Tester The SH105D equilibrium method low-temperature closed cup flash point analyzer is designed and manufactured in accordance with the requirements of the Chinese standard GB/T 5208 "Determination of Flash Point - Rapid Equilibrium Closed Cup Method". This instrument also meets the requirements of ISO 3679 standard and

ASTM D93 Automatic Essence Rapid Equilibrium Closed Flash Point Meter Sample 2ml - 10ml SH105E Full Automatic Essence Closed Flash Point Meter The SH105E full-automatic essence closed flash point tester is designed and manufactured in accordance with the requirements of standards GB/T 261, GB/T 14454.1 essence flash point, and GB/T 5208 Determination of Flash Point Rapid Balance Closed Cup Method. This instrument also meets the requirements of ISO 3679 standard. This

The SH708 Chemiluminescence Nitrogen Tester adopts the chemiluminescence principle to measure total nitrogen content. It features stronger anti-interference capability against impurities, eliminates unstable factors caused by titration cell blockage in coulometric methods, and greatly enhances instrument sensitivity.Core system components are imported, ensuring stable and reliable overall equipment performance.This instrument is applicable for testing total nitrogen content

The SD5096 Petroleum Products Copper Corrosion Tester is designed and manufactured in accordance with China national standard GB/T 5096, which is equivalent to ASTM D130 petroleum product copper corrosion test method. It is used to evaluate the copper corrosion degree of various petroleum products including aviation gasoline, aviation turbine fuel, motor gasoline, tractor fuel, cleaning solvent, kerosene, distillate fuel and lubricating oil in line with standard test methods.

SH708 Chemiluminescence Nitrogen AnalyzerThe SH708 chemiluminescence nitrogen analyzer adopts the chemiluminescence method to determine total nitrogen content. It enhances resistance to impurity interference, eliminates unstable factors caused by the titration cell locking operation in the coulometric method, and significantly improves the instrument sensitivity.Key system components are imported to ensure reliable performance of the entire unit.The analyzer is suitable for

SH129 grease drum stability instrument is applicable to standard ASTM D1831 SH/T0122, the operation of the instrument: with a certain amount of samples, at room temperature, after working on the drum test machine for 2h, determine the work of grease before and after the test coning degree. The instrument is suitable for measuring the consistency change of grease after working on the drum tester, and is used to judge the mechanical shearing stability of grease. ASTM D1831

SH123 automatic liquid phase rust tester is designed in strict accordance with GB / T11143 standard, and is first used to evaluate the determination of adding inhibitor mineral oil and turbine oil during water mixing; the liquid phase rust tester is equally suitable for the determination of rust resistance of hydraulic oil and circulating oil. Liquid phase rust tester can be widely used in electric power, petroleum, chemical industry, commercial inspection and scientific

SD5096 petroleum products copper corrosion tester is according to the standard of the People's Republic of China GB/T5096 equivalent ASTMD130 copper corrosion test method of the petroleum products the requirements stipulated in the design and manufacture, apply to specified by the standard test method, evaluation of aviation gasoline, aviation turbine fuel, motor gasoline, farm tractors, washing solvent, kerosene distillate fuel and lubricating oil and other petroleum

ASTMD566 grease drop point tester Double hole oil bath SD4929A SD4929A grease drop point tester is designed and manufactured according to the requirements of the People's Republic of China standard GB/T4929 "Grease drop point determination method". It is suitable for testing the drop point of grease according to the GB/T4929 standard. Purpose: This instrument is suitable for measuring the drop point of grease according to GB/T4929, ISO2176, ASTMD566, TP31, "Grease drop point

PRODUCT DESCRIPTION SD-4929A Lubricant Drop Point Tester ASTMD566 Double Hole Drip Hole Ø28mm Oil Bath The SD4929A lubricant drop point measuring instrument is designed and manufactured according to the requirements of the Chinese standard GB/T 4929 "Method for Measuring the Drop Point of Lubricating Greases", and is suitable for measuring the drop point of lubricating grease according to the test method specified in GB/T4929 standard. Purpose: This instrument is suitable for