Signal Generator

High-performance FPGA-based PXI Vector Signal Transceiver with 1 GHz bandwidth supporting 5G NR and Wi-Fi 6 testing. Features 5-21 GHz frequency range, fast measurement speeds for production environments, and configurable millimeter-wave and intermediate frequency setups. Includes OEM support and comprehensive system integration capabilities.

High-performance RF test solution combining vector signal generator and analyzer in one module. Features 5-12 GHz frequency range, 1 GHz instantaneous bandwidth, FPGA-based processing, and modular design for MIMO systems. Ideal for millimeter-wave verification, production testing, and wireless standards compliance.

High-precision PXI sound and vibration module with 2 analog input and 2 output channels, 250 kS/s sampling rate, and 121 dB dynamic range. Features AC/DC coupling, IEPE conditioning, and six configurable gain settings for audio testing, automotive NVH, and machine monitoring.

The PXIe-4304 offers 32 differential channels, 24-bit resolution, and 5 kS/s sampling per channel. Features anti-aliasing filters and optimized bus transfers for real-time control. Ideal for industrial automation and test systems requiring high accuracy and reliability.

High-density PXI SMU with 12 channels, 4-quadrant operation, 100 pA current resolution, and 100 kS/s test rate. Features SourceAdapt technology for enhanced stability. Ideal for mixed-signal IC testing in semiconductor production. Customizable transient response.

The PXIe-4144 SMU offers 4 channels with 6V voltage and 500mA current range, ideal for RFIC testing. Features 150 pA sensitivity, 3W power sink/source, and supports NI LabVIEW. Customizable modulation and communication protocols for ZigBee, WLAN, and WiMAX.

The PXIe-2748 is a 16x1 RF multiplexer switch module with 3 GHz bandwidth and 50 Ohm impedance. Features onboard relay counting, low insertion loss, and wide operating temperature range. Ideal for production test and OEM systems requiring reliable RF signal routing.

Dual 8x1 RF multiplexer switch module for routing signals up to 2.7 GHz. Supports 30V switching, 50 ohm impedance, and onboard relay counting. Ideal for production test systems requiring high channel count and reliable RF switching.

High-density 50 Ω RF multiplexer switch module with 16 channels and 500 MHz bandwidth. Configurable as unterminated multiplexer or sparse matrix. Supports up to 10W RF power per channel. Ideal for automated test systems and seamless integration with NI instruments.

High-performance 512-crosspoint reed relay matrix switch module for automated test systems. Supports up to 4x2176 single-wire matrices. Fast 2000 ops/sec switching, 30 MHz bandwidth, 100 VDC/0.5 A. Customizable topologies. Ideal for high-channel-count DUT/UUT testing.

The NI PXI-7851 features a user-programmable Virtex-5 FPGA for custom signal processing and direct I/O control. With 8 analog inputs at 750 kS/s, 8 analog outputs at 1 MS/s, and 96 digital I/O lines, it offers OEM-compatible, high-performance reconfigurable I/O for automated test systems.

Industrial-grade PXI digital I/O module with 48 channels (24 isolated inputs, 24 relay outputs) and channel-to-channel isolation. Features programmable power-up states, change detection, and RTSI bus. Supports -60 to +60 VDC input. Includes NI-DAQ driver with LabVIEW support. Ideal for automated test and process control.

24-bit PXI oscilloscope with 15 MS/s sampling rate and 114 dBc SFDR. Features flexible resolution, anti-aliasing, deep onboard memory, and multiple trigger modes. Ideal for precision spectrum analysis and audio measurements. Supports LabVIEW and custom OEM configurations.

The PXI-5404 is a 1-slot PXI waveform generator delivering 100 MHz sine waves with 1.07 µHz resolution. Features DDS technology, programmable amplitude, frequency, phase, and duty cycle. Ideal for ATE and stimulus-response systems. Supports 5V, 3.3V, or 1.8V outputs.

The NI PXI-2598 is a 50 Ohm, 26.5 GHz PXI transfer switch module for RF signal routing in ATE systems. Features electromechanical latching relays, onboard relay count tracking, and 1.25 A max carry current. Ideal for automated test applications.

High-performance 50Ω terminated RF multiplexer with 26.5 GHz bandwidth and 6 channels. Features 0.2 dB insertion loss, 80 dB isolation, and 150W power handling. Ideal for test frameworks and analyzers. Compatible with NI Switch Executive and over 100 PXI/SCXI configurations.

High-performance PXI RF multiplexer switch module with 6 channels and 26.5 GHz bandwidth. Features low insertion loss below 1 dB, Radiall relays, and NI Switch Executive software support. Ideal for automated test systems.

High-power 12A 1-wire 10-channel PXI multiplexer switch module for automotive, battery, and power testing. Features 300V isolation, 3kVA switching power, and durable silver nickel relays. Compact single-slot 3U design with low contact resistance.

High-performance PXI multiplexer with 12 channels, 900kHz bandwidth, and Reed relays. Supports multiple configurations, 300V CAT II, and 600V CAT I isolation. Ideal for automated test systems requiring reliable high-voltage switching.

The NI PXI-2564 is a 16-channel SPST relay module with 5A switching current and 10 MHz bandwidth. Features gold-plated contacts, low thermal offset, and 20M mechanical cycles. Ideal for automated test and automotive applications. Supports NI-SWITCH and LabVIEW.