Noise Analyzer

The PXIe-4339 offers 8 differential analog input channels with 25.6 kS/s sampling rate for precise strain/bridge measurements. Features dual error correction via remote sensing and shunt calibration. Supports quarter, half, and full-bridge configurations with 120Ω, 350Ω, 1000Ω resistance. Ideal for long-lead sensors.

The NI sbRIO-9269 C Series Voltage Output Module delivers 4 analog channels with ±10 V range and 100 kS/s simultaneous update rate. Features 16-bit DACs, 250 Vrms channel-to-channel isolation, short-circuit protection, and CompactRIO compatibility. Ideal for industrial automation and test systems.

The NI sbRIO-9239 C Series module offers 4 differential analog inputs with ±10 V range, 24-bit resolution, and 50 kS/s per channel. Features 60 VDC isolation and ±100 V overvoltage protection for reliable industrial measurement. Compatible with CompactRIO for precision automation and test systems.

The NI SbRIO-9219 offers 4 differential analog input channels with 24-bit resolution and 100 S/s per channel. Features channel-to-channel isolation at 250 Vrms, overvoltage protection, and low power consumption. Ideal for strain gages, thermocouples, and RTDs. Compatible with CompactRIO.

The SbRIO-9215 is a 4-channel C Series voltage input module with simultaneous sampling, 16-bit resolution, and dual barrier isolation up to 250 Vrms. Ideal for high common-mode voltage applications, it offers overvoltage protection and low-power sleep mode. Customizable for OEM needs.

High-density 16-channel thermocouple input module with 24-bit ADC, 75 S/s sampling, and 250 Vrms isolation. Supports all standard thermocouples with cold-junction compensation and anti-aliasing filtering. Ideal for precise temperature measurement in CompactRIO systems. Custom OEM solutions available.

OEM-approved NI sbRIO-9208 current input module with 16 single-ended analog channels, 500 S/s sampling rate, and 24-bit ΔΣ ADC. Features ±20 mA range, 60 VDC isolation, and low power consumption. Ideal for high-density industrial applications with customized support available.

OEM-supported C Series module with 4 programmable voltage ranges, 16-bit ADC, and 250 kS/s sampling. Features 32 single-ended channels, dual isolation, and ±30 VDC protection. Ideal for industrial signal acquisition.

OEM-ready C Series voltage input module with 8 single-ended channels, 12-bit resolution, and 500 kS/s sampling rate. Features ±10 V range, overvoltage protection up to 100 V, and low-power sleep mode. Compatible with CompactDAQ and CompactRIO systems.

Modular DC electronic load mainframe supporting up to 4 load modules with independent channels. Features 5-digit resolution, 120 programmable sequences, RS-232C USB LAN ports, and rack-mountable design. Ideal for production testing and battery evaluation.

High-speed PXI GPIB module with 7.7 MB/s HS488 transfer rate. Integrates non-PXI instruments into PXI systems. Includes NI-488.2 driver license. Backward compatible with IEEE 488.1. Ideal for OEM buyers seeking reliable, customizable control solutions.

The PXIe-8522 provides four 100BASE-T1 UTP endpoints and two network terminal access points for automotive ECU testing. Features onboard hardware timestamping, PXI synchronization, and NI-XNET software support. Ideal for reliable Ethernet validation in automotive applications.

High-performance PXI Express automotive Ethernet module with 4 ports, 100BASE-T1 UTP support, and 802.1AS master/slave synchronization. Features onboard hardware timestamping, 1.73 μs sniffer latency, and NI-XNET driver compatibility. Ideal for ECU development and validation.

8-port serial interface module supporting RS485/RS422 with full-duplex transmission. Features Modbus protocol, master-slave architecture, and compatibility with up to 247 slave devices. Ideal for industrial automation and OEM applications.

High-performance 40 Gigabit Ethernet interface module with dual QSFP+ ports supporting copper and fiber optic cabling. Features Intel XL710 controller, 40GBase-SR4 multimode support, and 150m max range. Hot-pluggable design with lifetime warranty. Ideal for industrial automation and high-speed data acquisition.

High-performance 10 Gigabit Ethernet interface module for PXI Express systems. Features dual SFP+ ports, Intel 82599 controller, and Gen2 x8 connection for fast data transfer. Supports copper and fiber optic cabling. Ideal for industrial automation and test systems.

OEM customizable NI PXIe-7972 FPGA module with Kintex-7 325T FPGA and 2 GB DRAM. Features CLIP node interface for HDL integration with LabVIEW, 1.7 GB/s bandwidth, and support for multiple clock domains. Ideal for complex HDL applications.

High-performance PXI FlexRIO Coprocessor Module with Kintex UltraScale KU060 FPGA, 4GB DRAM, and 60 DMA channels. Supports data rates up to 16.375 Gbps. Programmable with LabVIEW and Vivado. Ideal for demanding signal-processing applications.

The PXIe-7903 features a reconfigurable XCVU11P FPGA for high-performance coprocessing, supporting data rates up to 28.2 Gb/s. With 48 bidirectional digital channels and 20 GB DRAM, it offers flexible connectivity via Mini-SAS HD and SMA connectors. Ideal for protocol verification and OEM requirements.

High-performance PXI Digital Reconfigurable I/O Module with Kintex-7 325T FPGA, 512 MB DRAM, and 128 DIO channels. Supports custom I/O, peer-to-peer streaming, and LabVIEW FPGA. Ideal for sensor simulation, HIL testing, and high-speed waveform generation.