Noise Analyzer
National Instruments PXI-8512 High Speed CAN Interface Module with Flexible Data Rate - Single/Dual Port Configurations
National Instruments PXI-8512 CAN Interface Module delivers high-speed performance with flexible data rates, supporting CAN, LIN, and FlexRay protocols. Features patented NI-XNET DMA engine reducing latency to microseconds, hardware acceleration for 192 frames, and seamless LabVIEW compatibility across Windows and Real-Time platforms. Ideal for industrial automation, HIL simulation, and control prototyping applications.
National Instruments PXI-8232 GPIB Control Module with Gigabit Ethernet 1000 Mbit/s and Compact 3.9x6.3 Inch Single-Slot Design
The National Instruments PXI-8232 combines IEEE 488 GPIB instrument control with Gigabit Ethernet connectivity in a space-efficient single-slot module. Features include 1000 Mbit/s transfer rates, HS488 support up to 7.7 MB/s, automatic cable polarity detection, and compatibility with 10BASE T/100BASE TX networks. Ideal for OEM applications requiring seamless integration of PXI and non-PXI systems.
National Instruments PXI-7853 PXI Reconfigurable I/O Module with 750 kS/sec Sampling Rate and 96 Digital Channels
Customizable PXI-7853 multifunction I/O module featuring 750 kS/sec sampling rate, 96 bidirectional digital channels, and Virtex-5 LX85 FPGA. Ideal for industrial automation and test systems with 8 analog inputs/outputs and 40 MHz clock rate. OEM support available for specialized applications.
National Instruments PXI-7852 Multifunction Reconfigurable I/O Module 96 Digital Channels 40 MHz Clock Rate
The PXI-7852 features a Virtex-5 LX50 FPGA, 96 bidirectional digital channels, and a 40 MHz clock rate for high-speed parallel processing. Ideal for DSP, control, and automation. Supports custom OEM configurations and LabVIEW FPGA programming for enhanced throughput and determinism.
National Instruments PXI-7841 Multifunction Reconfigurable I/O Module 8 AI 8 AO 200 kS/s
The PXI-7841 features 8 analog inputs and 8 analog outputs with 200 kS/s per channel, 16-bit resolution, and a built-in Virtex-5 LX30 FPGA for enhanced performance. Supports 96 digital I/O lines, multiple input modes, and meets EMC standards. Ideal for automated test and control systems.
National Instruments PXI-6529 PXI Digital I/O Module - 48 Channels, 60V Logic, 100-Pin SCSI Connector
High-performance 48-channel PXI digital I/O module with channel-to-channel isolation and -60V to 60V input range. Features change detection, digital filtering, and real-time system integration. Ideal for industrial automation, automotive design, and biomedical applications with full NIDAQmx driver compatibility.
National Instruments PXI-6514 64-Channel ±30 VDC Digital I/O Module with 350 mA Drive and 100-pin SCSI Connector
Industrial-grade 64-channel PXI digital I/O module featuring ±30 VDC operation, 32 source/sink inputs, 32 source outputs, and advanced safety features including software-configurable states, digital filtering, and watchdog technology. Compatible with NIDAQmx drivers and LabVIEW for reliable automation and test system integration.
National Instruments PXI-6511 64-Channel ±30 VDC Digital I/O Module for OEM Integration
The PXI-6511 offers 64 bank-isolated digital I/O channels with ±30 VDC range and 24 V logic. Features integrated watchdog, programmable input filters, and high-density 100-pin SCSI connector. Compatible with LabVIEW and NIDAQmx for reliable industrial automation.
National Instruments PXI-6143 Multifunction I/O Module 8 AI 16-Bit 250 kS/s
The NI PXI-6143 offers 8 analog input channels with 16-bit resolution and 250 kS/s per channel, plus 8 digital I/O. Features simultaneous sampling, two 24-bit counters, and NI-DAQmx support. Ideal for high-energy physics, sonar, and multi-axis control. Custom support available.
National Instruments PXI-2566 16-Channel SPDT Relay Module with 70 MHz Bandwidth and 2A Switching Current
High-performance PXI relay module featuring 16 SPDT channels with 70 MHz switching bandwidth and 2A DC/AC current capacity. Designed for automated test systems with fast 2ms switching, 115 cycles/second operation, and compact 3U single-slot design. Ideal for general-purpose switching applications requiring reliable signal routing and precision measurement capabilities.
National Instruments PXI-2549 PXI RF Relay Module with 2.7 GHz Bandwidth and 50 Ohm Impedance for Multiplexer Systems
High-performance PXI RF relay module featuring 4 relay groups, 45 Hz scan rate, and 2.7 GHz switching bandwidth. Includes SwitchBlock technology for flexible matrix switching, relay life tracking, and supports networks with over 2000 crosspoints. Ideal for automated test systems requiring reliable signal routing and minimal signal degradation.
National Instruments PCIe GPIB+ Controller with Integrated Analyzer for Windows
Combines IEEE 488 controller and analyzer in one PCIe device. Delivers highest IEEE 488.2 transfer rates with onboard DMA for uninterrupted data flow. Includes NI-488.2 driver for reliable third-party instrument integration. Ideal for troubleshooting and high-speed GPIB control.
National Instruments NI USRP-2901 Software-Defined Radio with 56 MHz Bandwidth and 70 MHz to 6 GHz Frequency Range
Professional software-defined radio device featuring 56 MHz instantaneous bandwidth and 70 MHz to 6 GHz frequency range. Supports full-duplex MIMO operation with 12-bit ADC resolution for high-quality signal processing. Ideal for white space applications, sensor networks, broadcast FM, public safety systems, and GPS networks with USB 3.0 connectivity.
National Instruments PCIe-7846 Reconfigurable I/O Device with 500 kS/s Sampling Rate, 8 Analog Input/Output Channels
High-performance PCIe-7846 multifunction I/O device featuring 500 kS/s sampling rate, 8 analog input/output channels, and 48 digital I/O lines. Powered by Kintex-7 FPGA with 16 DMA channels for industrial automation and test applications. PCI Express interface with bus-powered operation.
National Instruments PCIe-7842 Reconfigurable I/O Device with 200 kS/s Sampling Rate, 96 Digital I/O Lines and Virtex-5 FPGA
High-performance multifunction reconfigurable I/O device featuring user-programmable Virtex-5 FPGA, 16-bit resolution, 200 kS/s sampling rate, and 96 digital I/O lines. Ideal for custom measurement, control systems, and real-time data acquisition with LabVIEW FPGA Module compatibility.
National Instruments PCIe-7841 Multifunction Reconfigurable I/O Device with Virtex-5 LX30 FPGA, 96 Digital I/O, 200 kS/s Sampling Rate
High-performance PCI Express reconfigurable I/O device featuring Xilinx Virtex-5 LX30 FPGA, 8 analog inputs with 200 kS/s sampling, 8 analog outputs with 1 MS/s update rate, and 96 bidirectional digital I/O ports. Offers TTL compatibility, independent timing control, and comprehensive OEM support for industrial automation and test applications.
National Instruments PCIe-6535B Digital I/O Device with 32 Bidirectional Channels, 10 MHz Clock Rate, 40 MB/s Throughput
High-performance PCI Express digital I/O device featuring 32 bidirectional channels, 10 MHz clock rate, and 40 MB/s throughput. Supports flexible voltage selection (2.5V-3.3V), multiple timing modes, and 32 mA current drive. Ideal for industrial applications requiring precision and reliability in display panel testing and high-throughput scenarios.
National Instruments PCIe-6376 Multifunction I/O Device with 16-bit Resolution 3.571 MS/s Sampling Rate and 8 Differential Inputs
High-performance PCI Express multifunction I/O device featuring 8 differential analog inputs with 16-bit resolution, simultaneous sampling at 3.571 MS/s per channel, and advanced NI STC3 timing technology. Ideal for industrial testing, telecommunications, and research applications with 24 digital I/O lines and 4 high-resolution counters.
National Instruments PCIe-6346 Multifunction I/O Device with 500 kS/s/ch Sampling, 10 ns Resolution, 840 kS/s Update Rate
High-performance PCIe multifunction I/O device featuring 8 analog inputs, 2 analog outputs, and 24 digital I/O channels. Includes NI-STC3 technology for advanced synchronization, 4 universal 32-bit counters, and NI-DAQmx driver support. Ideal for control systems, test automation, and data logging applications requiring precision timing and measurement.
National Instruments PCI-6516 32-Channel Digital I/O Device 5V to 30V Control Power
The NI PCI-6516 provides 32 digital output channels with 0V to 30V range and 75mA current drive. Features a configurable watchdog timer for system safety, setting outputs to a safe state on failure. Ideal for industrial automation with OEM customization support.