Truck Spare Parts

24V HVAC Blend Door Actuator Motor for SHACMAN Delong X3000 This 24V HVAC blend door actuator motor is a bolt-on replacement for the air mix damper on SHACMAN Delong and X3000 trucks. It turns the damper door that blends warm and cool air, so the driver keeps full control of cab temperature. A worn motor usually sticks or hums; this one restores smooth movement. Item Specification Model No. DZ97189585302 Type HVAC air mix damper motor Voltage 24V DC Power 5W Connector 3-pin,

DZ97189585302 SHACMAN Blend Door Actuator Motor The DZ97189585302 is the blend door actuator motor for SHACMAN trucks. It drives the air mix damper inside the heater and AC box, so the cab warms or cools the way the driver sets it. When the old motor gives up, the door sticks and the vents blow one temperature only; this unit puts that control back. Item Specification Part No. DZ97189585302 Voltage 24V DC Torque 1.5 N.m Connector Original plug Gear POM Housing PA66 with glass

24V LED Height Indicator Lamp for SHACMAN Delong X3000 This 24V LED height indicator lamp is a drop-in replacement for the cab roof marker on SHACMAN Delong and X3000 trucks. The LED board uses less current than the old bulb unit and holds a steady amber light, so the truck outline stays easy to read at night and in heavy weather. Item Specification Model No. DZ93189723231 Light source SMD LED Voltage 24V DC Power 3W Light colour Amber Waterproof IP67 Housing PA66 nylon

DZ93189723231 SHACMAN Truck Height Indicator Lamp The DZ93189723231 is the height indicator lamp for SHACMAN heavy trucks. It sits on the cab roof and marks the top outline of the vehicle, so other drivers can judge the truck height and width in fog, rain or on a dim site road. It uses the original mounting points, so there is no drilling and no rewiring. Item Specification Part No. DZ93189723231 Voltage 24V DC Light colour Amber Lens PC, UV resistant Housing Black ABS

DZ9112530260 Heavy Duty Expansion Tank Return Water Joint The DZ9112530260 heavy duty return water joint is the expansion tank return connector built for SHACMAN F3000 and X3000 trucks working in dusty, high load jobs such as mining and long haul fleet duty. It returns coolant from the expansion tank back into the cooling loop and keeps the joint tight under vibration. Compared with a plain replacement, this version uses a corrosion resistant steel body and a reinforced

DZ9112530260 Expansion Tank Return Water Connector The DZ9112530260 return water connector is the expansion tank (coolant reservoir) return joint used on SHACMAN F3000 and X3000 heavy trucks. It links the expansion tank return line back into the cooling circuit, keeping coolant flow steady and the recovery pressure balanced while the engine runs. This unit is a direct replacement for the original factory part. The body is machined from steel and finished for everyday engine

SHACMAN Expansion Tank Assembly DZ97259533031 The DZ97259533031 is the complete coolant expansion tank assembly for SHACMAN heavy trucks. It holds the coolant that is pushed out of the radiator as the engine warms up, then lets it flow back once the system cools, so the cooling circuit keeps a steady pressure instead of building up at the cap. The unit arrives as a full assembly with the filler cap and the hose ports already fitted, so it goes straight onto the original

SHACMAN Coolant Return Hose DZ97259539024 The DZ97259539024 is the coolant return hose that runs between the expansion tank and the engine cooling circuit on SHACMAN heavy trucks. It feeds coolant back to the tank while the system expands and contracts, which keeps the pressure in the circuit within its normal range. The hose is built from moulded rubber with a metal fitting on the end, so it seals onto the tank outlet without extra adapters. It is kept in stock for SHACMAN

SHACMAN Expansion Tank Return Pipe DZ96259533005 The DZ96259533005 is the coolant return pipe that links the expansion tank to the cooling circuit on SHACMAN heavy trucks. It carries coolant back to the tank as the engine warms up and cools down, so the system keeps a steady pressure instead of building up at the cap. This is a direct fit replacement part. The hose is moulded EPDM rubber with a reinforced layer and the metal clamp connector is fitted on the end. It is a

BY612600091076 Dump Truck Starter Motor for Heavy Trucks The BY612600091076 is a heavy-duty starter motor for dump trucks. It turns the engine over with the torque needed for large diesel units, giving dependable cold and hot starts. Item Specification Part No. BY612600091076 Size 330 x 200 x 125 mm Type Starter motor Order Fits SHACMAN dump trucks and other heavy trucks. Order per piece or in wholesale lots.

BY612600091078 SHACMAN Original Starter Motor The BY612600091078 is an original SHACMAN starter motor. It cranks the engine over at starting speed, so a strong starter gives quick, reliable starts in cold and hot conditions alike. Item Specification Part No. BY612600091078 Size 330 x 200 x 125 mm Type Starter motor Order Fits SHACMAN heavy trucks. Replace a slow or clicking starter. Order with your model and quantity.

BY612600040114 SHACMAN Tractor Valve Rod Sealing Sleeve The BY612600040114 is a valve rod sealing sleeve for SHACMAN tractor trucks. It seals the valve guide area to stop oil passing into the combustion chamber or leaking out, which keeps engine oil use and smoke in check. Item Specification Part No. BY612600040114 Size 20 x 20 x 11 mm Type Valve rod sealing sleeve Fitment and use Suits SHACMAN tractor truck engines. A routine engine repair part. Order per piece or in sets

DZ93189585807 SHACMAN Wiper/Flash Interval Controller The DZ93189585807 is an original SHACMAN wiper and flash interval controller. It sets the intermittent wiper and indicator timing from the cab, so the driver can match the wiper speed to the weather. Item Specification Part No. DZ93189585807 Size 60 x 60 x 28 mm Type Interval controller Fitment and use Suits SHACMAN heavy trucks and trailers. Send your model and quantity for a quote.

DZ13241770930 Blind-Spot View Mirror Assembly The DZ13241770930 is a complementary exterior view mirror assembly (blind-spot mirror). It covers the area the main mirrors miss, helping the driver see close traffic and obstacles when turning. Item Specification Part No. DZ13241770930 Size 350 x 200 x 50 mm Weight 3 kg Type Blind-spot mirror Fitment and use Fits SHACMAN heavy trucks. A practical safety upgrade. Send your model and quantity for a quote.

DZ97189585301 Mode Damper Assembly The DZ97189585301 is a mode damper assembly (damper motor) for SHACMAN dump trucks. It moves the air distribution flap in the cab HVAC system so the driver can switch airflow between face, feet and defrost. Item Specification Part No. DZ97189585301 Size 120 x 90 x 50 mm Type Mode damper motor Fitment and use Fits SHACMAN dump trucks and other heavy trucks. Restores full control of the cab ventilation. Order with your model and quantity.

DZ96189584110 Tractor Truck Combination Gauge The DZ96189584110 is an original SHACMAN tractor truck combination gauge. It groups the main driver gauges in one panel so readings for speed, pressure and temperature sit together on the dash. Item Specification Part No. DZ96189584110 Size 400 x 230 x 60 mm Type Combination gauge Fitment and use Fits SHACMAN tractor trucks. Replace a faulty or fogged gauge cluster. Wholesale and fleet orders welcome.

DZ96189270001 SHACMAN Truck Air Horn The DZ96189270001 is an original SHACMAN truck air horn for heavy-duty cabs. It gives a loud, clear signal for highway and site work, and mounts to the factory air horn position. Item Specification Part No. DZ96189270001 Type Air horn Brand SHACMAN original Fitment and use Fits SHACMAN dump trucks, tractor heads and cargo trucks. Send us your model and quantity for a price and lead time.

DZ1640230024 Right Front Fender for Heavy Trucks The DZ1640230024 is an original right front fender for heavy trucks. It guards the front wheel and bodywork from spray and stones, and restores the cab's front lines after damage. Item Specification Part No. DZ1640230024 Size 540 x 640 x 130 mm Side Right front Fitment and use Fits SHACMAN heavy trucks. Original-fit body repair part. Confirm your model and quantity when ordering.

Original Front-View Mirror Assembly for SHACMAN This is an original front-view mirror assembly for SHACMAN trucks. It mounts above the cab to show what is directly in front, a useful safety aid in yards and tight city traffic. Item Specification Part Front-view mirror assembly Brand SHACMAN original Order Fits SHACMAN heavy trucks. Original-fit replacement mirror. Order with your model and quantity.

DZ13241845013 Compressor Assembly for Dump Trucks The DZ13241845013 is an original compressor assembly for dump truck air-conditioning systems. It compresses the refrigerant and drives it round the A/C circuit, so a sound compressor is key to cool air in the cab. Item Specification Part No. DZ13241845013 Size 125 x 240 mm Weight 0.1 kg Fitment and use Fits SHACMAN dump trucks and other heavy trucks. Replace a weak or seized A/C compressor. Wholesale orders welcome.