Truck Spare Parts

81.27110.6048 SHACMAN Electronic Odometer The 81.27110.6048 is an electronic odometer for SHACMAN trucks. It records distance travelled and shows it on the dash, replacing a failed or inaccurate factory unit. Item Specification Part No. 81.27110.6048 Size 150 x 85 x 150 mm Weight 0.1 kg Fitment and use Fits SHACMAN heavy trucks. Confirm your model when ordering; single pieces and wholesale lots available.

81.62651.0049 SHACMAN Original Tractor Truck Seals The 81.62651.0049 is an original SHACMAN door and window seal for tractor trucks. It closes the gap around the cab opening so wind, rain and dust stay out and cab noise is reduced. Item Specification Part No. 81.62651.0049 Size 610 x 20 x 20 mm Weight 0.1 kg Fitment and use Fits SHACMAN tractor truck cabs. Replace a hardened or torn seal. Wholesale lengths and lots available.

DZ13241770913 SHACMAN Wide-Angle External Mirror Assembly The DZ13241770913 is a SHACMAN wide-angle external mirror assembly. It broadens the driver's rear view to reduce blind spots, an important safety item for long-haul and site work. Item Specification Part No. DZ13241770913 Size 960 x 290 x 280 mm Type Wide-angle mirror Fitment and use Fits SHACMAN F3000, X3000 and H3000 trucks. Original-fit replacement mirror. Order with your model and quantity.

DZ93189723024 SHACMAN Right Headlamp Shield The DZ93189723024 is an original SHACMAN right headlamp shield for dump trucks. It is the protective cover over the headlamp, guarding the lens from stones and debris on site and gravel roads. Item Specification Part No. DZ93189723024 Size 520 x 290 x 65 mm Side Right Fitment and use Fits SHACMAN dump trucks and other heavy trucks. Low-cost protection for the headlamp. Order with your model and quantity.

DZ97259820101 SHACMAN Tilting Oil Cylinder The DZ97259820101 is an original SHACMAN cab tilting oil cylinder. It raises and lowers the cab for engine access, using hydraulic pressure to lift the cab smoothly and hold it safely. Item Specification Part No. DZ97259820101 Size 570 x 110 x 57 mm Weight 2 kg Fitment and use Fits SHACMAN F3000, X3000 and H3000 trucks. Replace a weak or leaking tilt cylinder. Send your model and quantity for a quote.

DZ97189584123 SHACMAN Original Combination Gauge The DZ97189584123 is an original SHACMAN combination gauge for heavy trucks. It places the main driver readouts in one instrument panel, making it quick to check the truck at a glance. Item Specification Part No. DZ97189584123 Size 440 x 220 x 85 mm Type Combination gauge Fitment and use Fits SHACMAN F3000, X3000 and H3000 trucks. Replace a faulty gauge cluster with an original-fit part. Wholesale orders welcome.

DZ93189932117 Howo Dragon Cab Floor Crossmember Bracket The DZ93189932117 is a reinforced floor crossmember and mounting bracket for the Sinotruk Howo Dragon series cab. It stiffens the cab floor and carries the dashboard and interior structure, so the cab stays rigid under load. Item Specification Part No. DZ93189932117 Size 260 x 100 x 10 mm Weight 0.5 kg Fitment and use Suits Sinotruk Howo Dragon series cabs. Send your model and quantity for a quote.

DZ14251240014 Non-Slip Aluminium Cab Step Plate The DZ14251240014 is a heavy-duty non-slip cab step plate for commercial vehicles. The aluminium board keeps weight low while the textured surface gives a sure footing in wet or muddy conditions. Item Specification Part No. DZ14251240014 Size 395 x 155 x 30 mm Material Aluminium Fitment and use Fits SHACMAN and similar truck cabs. Replace a slippery or cracked step board. Wholesale quantities welcome.

DZ15221242464 SHACMAN Original Lower Stair The DZ15221242464 is an original SHACMAN lower stair (cab step) for dump trucks. It gives a solid, non-slip footing for getting in and out of the cab on site and on the road. Item Specification Part No. DZ15221242464 Type Cab lower stair Brand SHACMAN original Fitment and use Common on SHACMAN dump trucks, tractor heads and cargo trucks. Order single pieces or wholesale lots with your model and quantity.

SHACMAN 10PK Poly V Ribbed Belt This SHACMAN 10PK ribbed belt (poly V-belt) drives the engine accessories. The ribbed profile grips the pulleys well to run alternator, fan and compressor quietly, and it comes with a supply warranty. Item Specification Type 10PK poly V-ribbed belt Brand SHACMAN Order Fits SHACMAN heavy trucks. Order per piece or in bulk with your quantity; confirm your engine model for the right size.

BY612640060240 Air Conditioning Compressor Bracket The BY612640060240 is an air-conditioning compressor bracket for tractor trucks. It mounts the A/C compressor to the engine so the belt runs true and the compressor stays aligned under vibration. Item Specification Part No. BY612640060240 Size 245 x 250 x 115 mm Type A/C compressor bracket Order Fits SHACMAN tractor trucks. Original-fit bracket for A/C repair. Order with your model and quantity.

SHACMAN X3000 Truck Wiper Blade DZ14251740014 The DZ14251740014 is an original wiper blade for the SHACMAN X3000 truck. It clears the windscreen to keep the driver's view sharp in rain and mud, and it fits the factory wiper arm directly. Item Specification Part No. DZ14251740014 Model SHACMAN X3000 Type Wiper blade Order Fits SHACMAN X3000 trucks. A quick, low-cost wiper replacement. Order per piece or in bulk.

81.25902.0460 SHACMAN Original Auto Parts Relay The 81.25902.0460 is an original SHACMAN relay. It switches circuits in the truck electrical system, letting cab controls operate higher-current loads without overloading the switchgear. Item Specification Part No. 81.25902.0460 Size 40 x 27 x 27 mm Type Relay Order Fits SHACMAN heavy trucks. A low-cost spare for fault repair. Order per piece or in bulk.

DZ98259510040 Heavy Duty Chassis Cross Member for SHACMAN F3000 X3000 This is the reinforced chassis cross member for SHACMAN F3000 and X3000 trucks working on mine haul roads and heavy construction. Same fitment as DZ95319519003, but built thicker for trucks that carry a load every day and barely see a smooth road. The beam is formed from Q345 steel with a deeper trough section, and the gussets at the ends are full length rather than spot welded. That is what holds the frame

Engine Limit Relay 24V for SHACMAN F3000 X3000 This engine limit relay sits in the truck electrical box and cuts the circuit when the engine reaches a set limit, which is what protects the motor on overspeed, overheat or low oil pressure events. It fits SHACMAN F3000 and X3000 cabs and drops straight into the original socket. The contacts are silver alloy, so they do not pit as quickly as plain copper under repeated switching. The coil is sealed against dust and the base has

81.62640.6058 Manual Window Regulator Lifter for SHACMAN Trucks Not every fleet wants a motor on the door. This manual window regulator is the hand-crank version for SHACMAN F3000 and X3000 cabs, and it uses the same mounting holes and the same part number 81.62640.6058 as the powered unit. The crank shaft and the lifting arm are both steel, and the sector gear is case hardened so the teeth do not round off over time. For long-haul trucks working in dusty areas, a manual

The SHACMAN truck convex blind spot rearview mirror widens the view along the truck sides. The curved convex surface shows more of the adjacent lane, which helps the driver confirm the blind zone before overtaking or changing lanes. It is a practical, low cost safety accessory for both new and used trucks. Key Features Convex glass that widens the side field of view Fits standard SHACMAN cab mirror brackets Lightweight housing that adds little load to the bracket Quick

The SHACMAN truck wide angle rearview mirror is supplied as a matched left and right pair. The curved wide angle surface displays more of the adjacent lane than a standard flat mirror, which helps drivers spot overtaking vehicles and reduce blind zones on the cab sides. Key Features Matched left and right pair for a complete cab side refresh Wide angle convex glass for an extended rearward view Vibration resistant bracket that holds steady at highway speed Direct replacement,

Waterproof Engine Limit Relay for SHACMAN Trucks For trucks working in dust, rain or wash-down conditions, this is the sealed version of the engine limit relay. It does the same job as the standard part, cutting the engine circuit at its set limits, but the housing is fully sealed so water and grit cannot get to the coil or the contacts, so it fits SHACMAN F3000 and X3000 cabs. The terminals are tinned against corrosion, and the sealed body keeps the contacts dry even after a

When a truck works hard all day, the crankshaft seal is the part that takes the heat. This 2863702X seal is made from FKM (Viton) instead of the usual nitrile, and that is the whole point: it keeps sealing when the front of the engine gets hot and ordinary rubber starts to harden and crack. It is a drop-in fit for Weichai WP10 and WP12 engines, and it is the seal we recommend for long-haul and mining trucks that rarely see a cool day. The case is zinc plated so it comes back