Electrical Components

AZD9L-W WIFI Control mode MCB/RCCB/RCBO Controlled by WiFi -It can be used for intelligent household electricity management and photovoltaic distribution systems. -It can be matched with MCB/RCCB/RCBO and remotely controlled for closing and opening through the APP. -RCCB/MCB/RCBO (timing switch function) can be set to be turned ON/OFF at any time through the APP. -With manual / automatic selector switch. -With mechanical / electronic double locking function. -The shaft

AZD9L-S RS485 Control mode MCB/RCCB/RCBO with RS485 Interface Can be widely used in power grid terminal line, such as meter box, new energy circuit management, PV solar control box, smart electricity, smart home, new energy vehicle charging pile, and so on. -Can be matched with MCB/RCCB,remote switching and splitting of MCB/RCCB -Remote monitoring and control of MCB/RCCB through RS485 interface -With manual/ automatic selector switch. -With mechanical/electronic double

AZD9L-R Auto Rexlosing Control mode MCB/RCCB/RCBO with Auto Reclosing Can be widely used in power grid terminal line, such as meter box, new energy circuit management, PV solar control box, smart electricity, smart home, new energy vehicle charging pile, and so on. -It can be matched with MCB /RCD and automatically reclose when MCB /RCCB trips unexpectedly, No need for manual closing, reduce the cost of manual maintenance, and eliminate faults in time to improve efficiency.

AZD9L-C/D MCB/RCCB/RCBO Controlled by Switch Controlled by Switch Control mode Can be widely used in power grid terminal line, such as meter box, new energy circuit management, PV solar control box, smart electricity, smart home, new energy vehicle charging pile, and so on. -It can be matched with MCB /RCCB to remotely close and open MCB/RCCB -MCB / RCCB controlled by switch, type D has auto reclosing function. -With manual/automatic selector switch. -With mechanical

AZH8 Rated current16-125A IEC60947-3 GYH8 isolation switch is mainly suitable for distribution and control circuits with AC 50Hz, rated voltage up to 400V, rated current 125A and below. It is mainly used as the main switch in terminal combination appliances and can also be used to control various low-power appliances and lighting infrequently.Widely used in industrial and mining enterprises, high-risebuildings, commercial and household places, etc. The product has a

AZR9LE Rated residual Operating current 0.03A,0.1A,0.3A IEC/EN61009-1 The AZR9LE residual current circuit breaker is designed for AC 50/60Hz power systems with rated voltages of 240V (two-pole) and 415V (four-pole), supporting rated currents up to 40A. When a person experiences electric shock or grid leakage current exceeds specified thresholds, the breaker instantly disconnects faulty circuits to ensure safety for both personnel and electrical equipment. It also provides

AZR9NE-ARC Rated residual action current0.03A IEC/EN62606,IEC/EN61009-1 AZR9NE-ARC series arc fault circuit breaker is suitable for household and similar AC circuits with AC 50/60Hz, rated voltage of 240V at both poles, and rated current of 40A and below. The product has an arc fault protection unit that can detect and identify series arc faults, parallel arc faults, and grounding arc faults in the line; For example, aging, damage, and humid air in the insulation layer of the

AZR10NE Rated residual action current0.03A,0.1A,0.3A IEC/EN 61009-1 AZR10N residual current operated circuit breaker is suitable for AC 50/60Hz, rated voltage up to 240V, and rated current up to 40A lines. When personal electric shock or power grid leakage current exceeds the specified value, the circuit breaker can quickly cut off the faulty power supply in a very short time, protecting the safety of personnel and electrical equipment. It can also be used for overload and

AZR9NE-F/B Rated residual action current0.03A,0.1A,0.3A IEC/EN 61009-1, IEC/EN 62423 The AZR9NE-F/B Residual Current Operated Circuit Breaker is suitable for circuits with an AC frequency of 50/60Hz, rated voltage up to 240V, and rated current up to 40A. It is designed to detect AC leakage, pulsating DC leakage, smooth DC leakage, composite waveform leakage, and high-frequency leakage up to 1kHz. The device can rapidly cut off faulty power within an extremely short time to

AZR9N Rated residual action current 0.03A,0.1A,0.3A IEC/EN 61009-1 AZR9N residual current operated circuit breaker is suitable for AC 50/60Hz, rated voltage up to 415V, and rated current up to 40A lines. When a person is electrocuted or the leakage currentof the power grid exceeds the specified value, the circuit breaker can quickly cut off the faulty power supply in a very short time, protecting the safety of people and electrical equipment. It can also be used for overload

AZL9-F/B Rated residual action current 0.03A,0.1A,0.3A IEC/EN 61008-1,IEC/EN 62423 GYL9-F/B residual current operated circuit breaker is suitable for AC 50/60Hz, rated voltage two poles 240V, four poles 415V, rated current up to 100A lines. Used for detecting AC leakage, pulsating DC leakage, smooth DC leakage, composite wave leakage, and high-frequency leakage up to 1kHz. When personal electric shock or circuit leakage current exceeds the specified value,the circuit breaker

AZL9-EV Rated residual action current 0.03A,0.1A,0.3A IEC/EN 61008-1,IEC/EN 62955 AZL9-EV residual current operated circuit breaker is suitable for AC 50/60Hz, rated voltage two poles 240V, four poles 415V, and rated current up to 100A lines. Used to detect AC leakage, pulsating DC leakage, composite wave leakage, and high-frequency leakage up to 1kHz, while disconnecting or triggering the disconnection of electric vehicle charging when a smooth DC residual current greater

AZL9 Rated residual action current 0.03A,0.1A,0.3A IEC/EN 61008-1 AZL9 residual current operated circuit breaker is suitable for AC 50/60Hz, rated voltage two poles 240V, four poles 415V, rated current up to 100A lines. When a person is electrocuted or the leakage current of the power grid exceeds the specified value, the circuit breaker can quickly cut off the faulty power supply in a very short time, protecting the safety of people and electrical equipment. It can also be

AZL10 Rated residual action current 0.03A ,0.1A ,0.3A IEC/EN 61008-1 The AZL10 residual current operated circuit breaker is designed for AC circuits with a frequency of 50/60Hz, rated voltage up to 415V, and rated current up to 63A. In the event of electric shock or when grid leakage current exceeds the specified threshold, the breaker can rapidly disconnect the faulty circuit within an extremely short time to ensure personal safety and protect electrical equipment. It can

AZL8 Rated residual action current 0.03A,0.1A,0.3A IEC/EN 61008-1 The AZL8 Residual Current Operated Circuit Breaker is designed for AC circuits with 50/60Hz frequency, rated voltage up to 415V, and rated current up to 63A. When electric shock to a person occurs or when grid leakage current exceeds preset values, the circuit breaker can rapidly cut off the fault power supply within an extremely short time to protect personal safety and electrical equipment. It may also serve

AZM9N Breaking capacity3/4.5KA IEC/EN 60898-1 AZM9N miniature circuit breaker is mainly used for overload and short circuit protection in AC 50/60Hz, rated working voltage up to 230V, and rated current up to 40A lines, and can also be used for infrequent operation and conversion of lines.Suitable for various places such as industry, commerce, high-rise buildings, and residential buildings. RoHS 2.0 Compliant Connect the N line first and then disconnect it Contact Position

AZM9H-Z AC/DC Breaking capacity6KA IEC/EN 60947-2 AZM9H-Z Miniature Circuit Breaker is designed for both AC and DC circuits: AC applications: 50/60Hz, rated voltage 230/400V, rated current up to 63A. DC applications: Rated voltage 220V, rated current up to 63A. It provides overload and short-circuit protection and is suitable for infrequent switching operations of circuits under normal conditions. This circuit breaker is widely applicable in industrial, commercial, high-rise

AZM9H-DC Breaking capacity6KA IEC/EN 60947-2 AZM9H DC Circuit Breaker is designed for DC circuits with a rated voltage up to 1000V and a rated current up to 63A. It provides overload and short-circuit protection and can also be used for infrequent switching operations of circuits. This circuit breaker is suitable for DC system applications, such as communications and photovoltaic (PV) systems RoHS 2.0 compliant Dual busbar wiring function Transparent marking feature Contact

AZM9H-125 Breaking capacity10KA IEC/EN60947-2 AZM9H-125 Miniature Circuit Breaker is designed for circuits with AC 50/60Hz, rated voltage of 240/415V, and rated current up to 63A. It provides overload and short-circuit protection and is suitable for infrequent switching operations of circuits under normal conditions. This circuit breaker is widely applicable in industrial, commercial, high-rise buildings, and residential installations. RoHS 2.0 compliant Dual busbar wiring

AZM9(H) Breaking capacity6/10KA IEC/EN60898-1 The AZM9H miniature circuit breaker (MCB) is designed for AC 50/60Hz circuits with rated voltage 240/415V and rated current up to 63A, providing reliable overload and shortcircuit protection. It also serves for infrequent circuit switching operations. This breaker is suitable for various installations including industrial facilities, commercial buildings, high-rise structures, and residential applications. RoHS 2.0 compliant Dual