Presence Detector

MTN6300-0019 Schneide KNX Presence Detector DI - SpaceLogic 2 Channels 10 mA The MTN6300-0019 is a dual-technology presence detector with 2 digital inputs, designed for seamless integration into Schneide's SpaceLogic KNX building automation system. It combines passive infrared (PIR) and microwave detection to reliably identify human presence (even when stationary) and trigger automated control of lighting, HVAC, and other building systems. Key Specifications Supply Voltage

UP 255D21 KNX Brightness Sensor with Constant Light Level Controller 5WG1255-2DB21 Product Overview This KNX ceiling brightness sensor delivers precise mixed light measurement with an integrated constant light level controller for automatic daylight-harvesting dimming — no separate controller needed. Mounted compactly, it measures ambient illuminance while driving one main luminaire group plus up to four additional groups at a user-defined lux setpoint. Daylight increases

UP 251/11 KNX Motion Detector WALL White 5WG1251-2AB11 This wall-mounted KNX motion detector brings comprehensive occupancy sensing to locations where ceiling installation is impractical — stairwells, corridors, hallways. Featuring a 180° wide-angle PIR lens with frontal coverage up to 18 meters and lateral reach of 4–14 meters, it captures motion along elongated spaces that ceiling units cannot cover. Three sensors provide brightness for constant-light control, temperature

5WG1258-2DB61 UP258D61 KNX Presence Detector PIR Lux Sahara The 5WG12582DB61 (UP 258 D61) offers comprehensive KNX presence detection in a warm sahara (cream-beige) finish, perfectly coordinated with the DELTA sahara switch program. This advanced detector combines PIR sensing and lux measurement to automate lighting and HVAC control based on real-time occupancy and daylight conditions. Product Overview Ideal for hospitality environments, corridors, and spaces requiring warm

UP 251/12 KNX Motion Detector WALL Black 5WG1251-2AB12 This wall-mounted KNX motion detector matches its white variant's functionality in a sleek black finish for contemporary interiors with dark-toned switch ranges. Its 180° wide-angle PIR lens detects motion up to 18 meters frontally and 4-14 meters laterally—ideal for stairwells and corridors. Integrated brightness, temperature, and humidity sensors enable constant-light control, HVAC response, and dew-point monitoring.

5WG12582DB41 UP258D41 KNX Presence Detector PIR Lux Stainless The 5WG12582DB41 (UP 258 D41) delivers the full KNX presence detection capability of the UP 258 platform in a stainless-steel-effect finish (DB41), compatible with the DELTA stainless switch range. Product Overview PIR detection combined with a lux sensor enables precise, daylight-responsive presence control across lighting and climate systems. Chosen for high-specification commercial and hospitality projects where

AP 254/02 KNX Dual Sensor Brightness Temperature Sun Protection Control 5WG1254-3EY02 This outdoor KNX dual-function sensor combines brightness measurement, temperature sensing, sun protection control, and lighting supervision in an IP54-rated surface housing for facade installation. Technical Specifications Protocol KNX TP, S-Mode ETS; dual-sensor (brightness + temperature) single housing Brightness Range Mixed light; 1 ... 100,000 Lux (100 kLux) Temperature Range −25 °C ...

UP 258E22 KNX Presence Detector Motion Detector with Constant Light Level Control 5WG1258-2EB22 This KNX ceiling presence detector combines passive infrared occupancy sensing with integrated constant light level control for automatic daylight-harvesting in a single flush-mount unit. It delivers three selectable function blocks — presence detection, motion detection, and HVAC signaling — each with two configurable output functions including On/Off switching, dimming, scene

UP 258D12 KNX Presence Detector with Brightness Sensor 5WG1258-2DB12 This KNX ceiling presence detector integrates PIR occupancy detection with a built-in brightness sensor, providing both presence-triggered control and real-time illuminance measurement for daylight-responsive automation. It covers 360° horizontal field with approximately 105° vertical coverage, monitoring an area up to 8 m diameter depending on mounting height. The integrated IR decoder supports S 255/11

5WG1258-7EB11 AP258E11 Surface Mount Box Type B for UP/258 White Product Overview The 5WG12587EB11 (AP 258E11) is a surface mounting box Type B designed to convert UP 258 KNX presence detectors (D31, D41, D51) from flush-mount to surface-mount installation. When structural constraints prevent back-box cavity installation, the AP 258E11 provides a clean, finished housing that secures the UP 258 detector directly on wall or ceiling surfaces. The white finish (EB11) provides a

AP 258E13 Surface Mounting Box Type B Black for KNX WIDE Presence Detector 5WG1258-7EB13 The Surface Mounting Box Type B in black is an accessory designed to convert KNX WIDE series ceiling presence detectors (UP 258D..) from flush-mount to surface-mount installation. It is the black-finish counterpart to AP 258E11, intended for pairing with black-variant detectors (UP 258D33, D43, D53) to maintain a consistent visual appearance against dark or black ceilings. When a 60 mm

AP 258E01 Surface Mounting Enclosure White for Presence Detectors 5WG1258-7EB01 This white surface-mounting enclosure enables flush-mount KNX ceiling detectors to be installed on solid ceilings, exposed concrete, suspended grids, or any location where recessed conduit boxes are unavailable. It provides a clean architectural finish while maintaining full detection performance. Compatible Devices Designed specifically for the UP 258D12 (presence + brightness), UP 258E22

5WG1258-2DB53 KNX Presence Detector WIDE multi PIR Lux Temp RH CO2 Black Product Overview The 5WG1258-2DB53 (UP 258D53) is the flagship WIDE multi presence detector, offering a comprehensive sensor suite in a single ceiling-mounted device. This advanced detector combines PIR presence/motion detection, brightness, temperature, relative humidity, and CO₂ concentration measurement — five critical environmental parameters for complete building automation. Designed for indoor

5WG1258-2DB51 UP258D51 KNX Presence Detector PIR Lux Anthracite The 5WG12582DB51 (UP 258 D51) is the anthracite-finish variant of the UP 258 KNX presence detector family, designed to match the DELTA anthracite switch program. It integrates PIR occupancy detection with ambient lux sensing for automated, energy-efficient control of lighting and HVAC circuits. Product Overview The dark anthracite frame is favored in modern interiors, auditoriums, and upscale retail environments

S 258/13 Mounting Plate Black for KNX WIDE Presence Detector and 4x4 Boxes 5WG1258-8AB13 The S 258/13 Mounting Plate in black is an installation accessory that adapts KNX WIDE ceiling presence detectors (UP 258D..) to standard 4×4 electrical junction boxes. This black-finish counterpart to S 258/12 is designed for pairing with black-variant detectors (UP 258D33, D43, D53) to maintain a uniform dark appearance on the ceiling surface. When no 60 mm recessed back box is

S 255/11 IR Remote Control 6 Pushbutton Pairs for KNX Detectors 5WG1255-7AB11 Product Overview This infrared remote provides wireless operation of KNX presence detectors and brightness sensors without additional bus wiring or wall panels. Featuring six pushbutton pairs, it enables users to override lighting scenes, adjust dimming, control shutter/blind positions, and activate preset scenes from anywhere in the room. Each pair is independently parameterizable via ETS —

5WG1258-8AB12 S258 12 Mounting Plate 4-Gang Box for UP 258 White Product Overview The 5WG12588AB12 (S 258/12) is a mounting plate that enables installation of UP 258 KNX presence detectors into 4-gang (4*4) junction boxes. The plate bridges the gap between the UP 258's standard 55 mm footprint and the larger 4-gang box format commonly found in commercial electrical infrastructure. Finished in white (similar to RAL 9016) to maintain a clean, consistent appearance on walls and

5WG12582DB31 UP258D31 KNX Presence Detector PIR Lux Alu Silver Product Overview The 5WG12582DB31 (UP 258 D31) is a KNX flush-mount presence detector that combines PIR occupancy sensing with ambient lux measurement for automated lighting and HVAC control. This aluminum silver (DB31) variant matches the DELTA design series aluminium-effect switch frames, making it ideal for contemporary commercial interiors, executive offices, and architectural spaces where metallic switch

5WG12582EB22 UP258E22 KNX Presence Detector PIR Lux Titan White Product Overview The 5WG12582EB22 (UP 258 E22) is the DELTA line design variant of the UP 258 KNX presence detector, finished in titanium white (EB22) to match DELTA line switch frames. Functionally identical to the DB-series detectors, it combines PIR presence sensing and ambient lux detection for full KNX automation of lighting and climate loads. The DELTA line E-design offers a slimmer, more minimalist

5WG1255-2DB21 KNX Brightness Sensor with Constant Light Controller 5-CH Product Overview The 5WG1255-2DB21 (UP 255D21) is a KNX brightness sensor with integrated constant light level controller, designed for ceiling installation. Unlike presence detectors, its primary function is precise illuminance measurement via reflected light from the working plane below, with a range of 0–2,000 lux. It supports mixed-light measurement to distinguish between daylight and artificial light