Room Temperature Control Unit

QAP1030.200 Cable Temperature Sensor PVC 2m NTC 10k The QAP1030.200 is a cable-mounted NTC 10k temperature sensor with a 2-metre PVC-insulated lead for wired connection to the analog input of AQR2570 series KNX room sensor base modules. The NTC (Negative Temperature Coefficient) thermistor element provides resistance-based temperature measurement processed by the base module for closed-loop room, floor, or duct climate control via KNX. Flexible Installation The 2-metre cable

S 588/13 Stainless Steel Design Frame for KNX Touch Panel UP 588 3 5WG1588-8AB13 The S 588/13 is a stainless steel design frame for the UP 588/..3 series KNX touch panels, delivering a robust metallic surround that combines durability with premium visual appeal. Excellent resistance to scratches, fingerprints, and general wear makes it well-suited for high-traffic commercial environments, hospitality applications, healthcare facilities, and public buildings where long-term

FCC/S1.5.1.1 ABB KNX Fan Coil Controller 2-Fold PWM Output with 0-10V Modulating Fan Control for Advanced HVAC Product Overview The FCC/S1.5.1.1 is a high-performance modular component of the ABB i-bus® KNX building automation ecosystem, engineered to deliver exceptional reliability, energy efficiency, and operational scalability for modern intelligent infrastructure. As part of the globally recognized Room Temperature Control range, this device represents the convergence of

Schneider REG-K KNX HVAC actuator for 2/4-pipe systems. Bus-powered, dual-mode control (proportional/On-Off), supports fan speed regulation & PT1000 sensors. IP20 rated, manual/auto switching, fault feedback. Ideal for offices, hotels & smart buildings.

SE7300C5045 Schneider Local Standalone Room Controller The Schneider Electric Local Standalone Room Controller SE7300C5045 is an independent, non-networked room temperature controller for fan coil units and HVAC terminal equipment. This brand new controller provides reliable stand-alone zone comfort control without the need for a BAS network connection. Key Specifications Part Number SE7300C5045 Type Standalone (no BAS network required) Control Fan coil unit (2-pipe or 4-pipe

MTN6212-0325 KNX smart panel combines 4 lighting/shading buttons with room temperature control in bright white glossy finish. Features backlit display, 5 status LEDs, and supports heating/cooling modes with frost protection. Direct KNX integration for modern building automation.

SpaceLogic thermostat with Modbus for BMS integration, 3-speed fan control, LCD display, and 240V operation. Ideal for hotels, offices, and commercial HVAC systems.

Schneider TC500-4TM-WH thermostat offers reliable fan coil control with Modbus RTU communication for BMS integration. Features cooling/heating modes, adjustable fan speeds, and supports 4-pipe systems. Ideal for hotels, offices, and building automation with easy installation.

TC500 smart thermostat for fan coil units. Controls 3 fan speeds, cooling/heating/fan modes, and precise temperature. Energy-efficient, easy 86-type wall installation, ideal for hotels and offices.

TC600-4TMSA-WH: 4-pipe fan coil thermostat with Modbus communication for centralized HVAC control. Features precise temperature adjustment, multi-function operation, and energy-efficient performance for commercial and residential buildings.

TC600-2TMSA-WH LCD fan coil thermostat with Modbus communication, multi-function control, and 2-pipe system. Durable white design for reliable B2B HVAC applications.

Schneider Electric SE7300C5045 digital thermostat provides precise HVAC control for fan coil and air handling units. Features intuitive operation, reliable performance, and easy installation for offices, hotels, and commercial buildings.

MTN6730-0003 Schneide KNX 0-10V Fan Coil Controller Professional HVAC controller for building automation systems, designed for precise fan coil unit control in residential, commercial, and industrial applications. Technical Specifications Protocol & Connectivity Exclusive KNX wired bus protocol support with KNX Secure encryption technology. Direct integration into KNX building automation systems for signal linkage with room temperature controllers and fan coil units. Control

MTN6221-0414 Schneide KNX Room Temperature Unit System M Property Building Controller for KNX-based building automation systems Technical Specifications Bus Protocol & Integration Exclusively supports KNX wired bus protocol with built-in bus coupler for direct integration into KNX building automation systems. All parameter configuration and control commands are transmitted via bus telegrams. Control Functions Supports 2-point control, continuous PI control, and PWM switching

MTN6221-0325 Schneide Property Room Temperature Module System M KNX Building Control Module for professional property management applications Technical Specifications Communication & Protocol KNX wired bus protocol with integrated bus coupler Direct integration into KNX building automation systems Configuration and control via bus telegrams only Not compatible with KNX wireless or Radio Bus protocols Control Capabilities Three control modes: 2-point, continuous PI, and PWM

MTN639126 Schneide 24V Thermoelectric Valve Drive HVAC Automation Unit Technical Performance Parameters Power Supply & Control: 24V DC rated operating voltage, compatible with building automation system power circuits. Supports proportional and On/Off control modes with 0-10V/4-20mA analog signal input. Independent control design enhances electrical safety for single-point temperature control applications. Drive & Protection: Designed for small-caliber thermoelectric valves

MTN639125 Schneide 230V Proportional Thermoelectric Valve Drive for HVAC Technical Performance Parameters Power Supply & Control Rated operating voltage 230V AC, compatible with civil and industrial standard power supply circuits without additional transformers. Supports dual modes of proportional control and On/Off switching control, can receive 0-10V/4-20mA analog signals from thermostats. Independent control design without relying on bus systems, suitable for single-point

Schneide KNX Valve Drive Controller MTN6921-0001 Schneide KNX Valve Drive with 2 Inputs and Status LED Building Controller Technical Specifications Communication & Protocol Exclusive KNX wired bus protocol support with KNX Secure encryption compatibility Direct integration into KNX building automation systems Signal linkage with room temperature controllers and sensors Anti-loose dedicated terminal blocks for secure bus connections Control & Operation Single channel valve

MTN6730-0002 Schneide SpaceLogic KNX Valve Drive Controller Professional HVAC valve controller with 6 independent outputs for precise temperature regulation in building automation systems. Technical Specifications Communication & Protocol Exclusively supports KNX wired bus protocol with KNX Secure encryption technology. Directly integrable into KNX building automation systems for seamless signal linkage with room temperature controllers and central management platforms.

MTN6221-0319 Schneide KNX Room Temperature Control Module System M KNX Building Unit for professional building automation and temperature management Technical Specifications Protocol & Connectivity Exclusive KNX wired bus protocol support with built-in bus coupler Direct integration into KNX building automation systems All parameter configuration and control via bus telegrams Not compatible with KNX wireless, Radio Bus or other protocols Control Functions Three control modes