Transistor, Photovoltaic Output Optoisolators

Broadcom HCNR200/201 High-Linearity Analog Optocouplers Product Overview The Broadcom HCNR200/201 is a high-linearity analog optocoupler designed to isolate analog signals with exceptional stability, linearity, bandwidth, and cost-effectiveness. It features a high-performance AlGaAs LED coupled with two closely matched photodiodes. The integrated input photodiode monitors and stabilizes the LED's light output, effectively eliminating nonlinearity and drift. The output

Product Overview The HCPL-4701/4731/070A/073A series are very low power consumption, high gain single and dual channel optocouplers. Designed for ultra-low input current capability (as low as 40 A) and specified for 3V operation, these devices offer typical power consumption of less than 1 mW. They are ideal for battery-operated applications, ISDN telephone interfaces, and ground isolation between logic families due to their high current transfer ratio (up to 3500%) and TTL

Broadcom ACPL-227/ACPL-247 DC Input, Multi-Channel Half-Pitch Phototransistor Optocoupler Product Overview The Broadcom ACPL-227 and ACPL-247 are DC-input phototransistor optocouplers designed for reliable signal isolation. The ACPL-227 is a dual-channel device in an 8-pin SO package, while the ACPL-247 is a quad-channel device in a 16-pin SO package. Both offer high input-output isolation voltage of 3750VRMS and a typical response time of 2 s. They are suitable for

Product Overview The Broadcom ACPL-P343 and ACPL-W343 are optocouplers designed for driving power IGBTs and MOSFETs in motor control inverter applications. Featuring an integrated AlGaAs LED and a power output stage, these devices offer a high operating voltage range suitable for gate-controlled devices. They provide high peak output current and drive voltages required for IGBTs up to 1200V/200A, or can drive discrete power stages for higher-rated IGBTs. Key advantages

Broadcom QCFJ-3439T Automotive 17A Peak Gate Drive Optocoupler Product Overview The Broadcom QCFJ-3439T is a 17A peak smart gate drive optocoupler designed for driving IGBT or MOSFET directly in motor-control and inverter applications. It features high peak output current, a wide operating voltage range, fast propagation delay, and excellent timing skew performance. The device offers integrated IGBT/MOSFET desaturation protection and functional safety reporting, including

Product Overview Broadcom high gain series optocouplers utilize a Light Emitting Diode (LED) and an integrated high gain photodetector to achieve exceptional current transfer ratios. These optocouplers offer separate pins for the photodiode and output stage, enabling TTL-compatible saturation voltages and high-speed operation. For conventional photodarlington operation, the VCC and VO terminals can be tied together. A base access terminal allows for gain bandwidth adjustment.

Product Overview The Broadcom ACPL-2x4 series comprises AC-input, multi-channel, half-pitch phototransistor optocouplers designed for reliable signal transmission between circuits of different potentials and impedances. The ACPL-224 offers dual-channel isolation in an 8-pin SO package, while the ACPL-244 provides quad-channel isolation in a 16-pin SO package. Both devices feature high input-output isolation voltage (3750 VRMS), a typical response time of 2 s, and a minimum

Product Overview The HCNR200/201 is a high-linearity analog optocoupler designed for robust analog signal isolation. It features a high-performance AlGaAs LED illuminating two closely matched photodiodes, enabling precise monitoring and stabilization of LED light output. This design virtually eliminates non-linearity and drift, ensuring high linearity and stable gain characteristics. The optocoupler offers a wide bandwidth from DC to over 1 MHz and supports flexible circuit

Product Overview The HCPL-181 is a phototransistor optocoupler featuring a light-emitting diode optically coupled to a phototransistor. It is housed in a compact 4-pin mini-flat SMD package with a 2.0 mm profile, offering significant space savings with a 30% smaller package volume compared to conventional DIP types. This device provides high input-output isolation voltage of 3750 Vrms and a typical response time of 4 s. It is suitable for applications such as I/O interfaces

Product Overview The HCPL-817 is a high-density mounting type phototransistor optocoupler designed for signal transmission between circuits of different potentials and impedances. It features high input-output isolation voltage of 5000 Vrms and a compact dual-in-line package. Key performance characteristics include a minimum Current Transfer Ratio (CTR) of 50% and a fast response time (tr) typically at 4 s. This component is suitable for applications such as I/O interfaces

Product Overview The Broadcom HCNR200/201 is a high-linearity analog optocoupler designed for precise analog signal isolation. It features a high-performance AlGaAs LED coupled with two closely matched photodiodes. An integrated input photodiode monitors and stabilizes the LED's light output, effectively eliminating nonlinearity and drift. The output photodiode generates a photocurrent linearly proportional to the LED's stabilized light output. This design ensures high

Product Overview The HCNR200/201 is a high-linearity analog optocoupler designed for robust analog signal isolation. It features a high-performance AlGaAs LED illuminating two closely matched photodiodes, enabling superior linearity and stable gain characteristics by virtually eliminating LED non-linearity and drift. This optocoupler is ideal for applications requiring good stability, linearity, bandwidth, and low cost, including telecommunications, industrial process control

Product Overview The HCPL-181 is a phototransistor optocoupler housed in a compact 4-pin mini-flat SMD package with a 2.0 mm profile, offering significant space savings with a 30% smaller package volume compared to conventional DIP types. It provides high input-output isolation voltage of 3750 Vrms. Key features include a minimum Current Transfer Ratio (CTR) of 50% at 5 mA input current, a high collector-emitter voltage of 80 V, and a fast response time (tr) typically 4 s.

Product Overview The Broadcom HCPL-181 is a phototransistor optocoupler featuring a light-emitting diode optically coupled to a phototransistor. Packaged in a space-saving 4-pin mini-flat SMD with a 2.0-mm profile, it offers a 30% smaller package volume compared to conventional DIP types. This optocoupler provides high input-output isolation voltage of 3750 Vrms, a typical response time of 4 s, and a minimum CTR of 50% at 5 mA input current. It is suitable for I/O interfaces,

Product Overview The Broadcom ACPL-227 and ACPL-247 are DC-input, multi-channel, half-pitch phototransistor optocouplers designed for reliable signal isolation. The ACPL-227 features a dual-channel configuration in an 8-pin SO package, while the ACPL-247 offers a quad-channel setup in a 16-pin SO package. Both devices provide high input-output isolation voltage of 3750 VRMS, a typical response time of 2 s, and a minimum CTR of 50% at 5 mA input current. They are suitable for

Product Overview The Broadcom HCPL-354 is an AC input phototransistor optocoupler designed for space-saving applications. It features a phototransistor optically coupled to two inverse parallel LEDs, allowing direct operation with AC input current. Packaged in a 4-pin mini-flat SMD with a 2.0-mm profile, it offers a 30% smaller volume than conventional DIP types. The HCPL-354 provides an input-output isolation voltage of 3750 Vrms, a typical response time of 4 s, and a

Product Overview The Broadcom ACPL-217 is a single-channel, half-pitch phototransistor optocoupler designed for DC input applications. It features a light-emitting diode optically coupled to a phototransistor and is housed in a 4-pin SO package. Offering high input-output isolation voltage of 3750VRMS, a typical response time of 2 s, and a minimum CTR of 50% at 5 mA input current, the ACPL-217 is suitable for I/O interfaces in programmable controllers, sequence controllers,

Product Overview The Broadcom HCPL-181 is a compact phototransistor optocoupler featuring a light-emitting diode optically coupled to a phototransistor. Packaged in a 4-pin mini-flat SMD with a 2.0-mm profile, it offers significant space savings with a 30% smaller package volume compared to conventional DIP types. This component provides high input-output isolation voltage of 3750 Vrms and a typical response time of 4 s. It is suitable for I/O interfaces, system appliances,

Product Overview This document presents reliability data for Broadcom's Smart Gate Drive Optocoupler family, including models HCPL-316J, ACPL-331J/332J, ACPL-330J/333J, and QCPL-325J/329J. The data is derived from Broadcom's internal testing, utilizing similar wafer technology across these products. The reliability data reflects actual test results on a per-channel basis, with devices preconditioned at MSL 1 using a solder reflow process and temperature cycling. These

Product Overview These single-channel diode-transistor optocouplers provide electrical insulation between input and output using an insulating layer between an LED and an integrated photodetector. They offer high-speed operation, up to 1 Mb/s, and are TTL compatible. Separate connections for the photodiode bias and output transistor collector reduce base-collector capacitance, increasing speed significantly compared to conventional phototransistor couplers. Available in 8-Pin