Analog and Digital Output

Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It converts temperature from an onboard sensing element into an 8-bit digital word, accessible via a 2-wire SMBus/I2C compatible serial port. This allows for multi-drop/multi-zone monitoring and features a low-power Standby mode. With a temperature resolution of 1C and a typical conversion rate of 8 samples/sec, the TC74 offers ease of use and

Microchip TCN75A Digital Temperature SensorThe Microchip TCN75A is a digital temperature sensor designed to convert ambient temperatures into a digital word with high accuracy. It features user-programmable registers for flexible temperature-sensing applications, allowing for user-selectable resolution, power-saving modes (Shutdown and One-shot), and configurable temperature alert and hysteresis limits. The device outputs an alert signal when the temperature exceeds specified

Product OverviewThe MCP9902/3/4 is a high-accuracy, low-cost System Management Bus (SMBus) temperature sensor designed to monitor up to four temperature channels. It offers advanced features like Resistance Error Correction (REC) and Beta Compensation for robust environmental monitoring, automatically compensating for errors caused by series resistance and low beta transistors. This ensures accurate temperature measurements regardless of processor technology, providing a

Microchip EMC1413/EMC1414 Multiple Channel 1C Temperature Sensors with Beta CompensationThe EMC1413/EMC1414 are high accuracy, low cost, System Management Bus (SMBus) temperature sensors designed for complex environmental monitoring applications. They feature Resistance Error Correction (REC) and Beta Compensation to accurately measure temperatures from CPU diodes requiring the BJT/transistor model, even with varying transistor betas common in modern processors. Automatic

MCP9808 Digital Temperature Sensor The MCP9808 is a digital temperature sensor from Microchip Technology Inc. that converts temperature to a digital word with high accuracy, suitable for general, industrial, food processing, personal computer, PC peripheral, consumer electronics, and handheld/portable device applications. It offers user-programmable features such as temperature limits, measurement resolution, and alarm outputs, providing flexibility for various temperature

Product OverviewThe MCP9700/9700A and MCP9701/9701A are analog temperature sensors that convert temperature into an analog voltage. These low-cost, low-power Linear Active Thermistor ICs eliminate the need for additional signal-conditioning circuits required by traditional resistive sensors like thermistors. Their output voltage can be directly connected to a microcontroller's ADC, offering a simple and efficient solution for temperature monitoring. They are designed to drive

Product Overview The MCP9700/9700A and MCP9701/9701A are analog temperature sensors featuring a Linear Active Thermistor Integrated Circuit (IC). These low-cost, low-power devices convert temperature into an analog voltage, eliminating the need for additional signal-conditioning circuits required by traditional thermistors. They offer high accuracy and are optimized for direct connection to microcontroller ADCs, providing a simple and efficient solution for temperature

Product OverviewThe EMC1403 and EMC1404 are high-accuracy, low-cost System Management Bus (SMBus) temperature sensors designed for complex environmental monitoring applications. They feature advanced capabilities such as Resistance Error Correction (REC), Beta Compensation for CPU diodes (supporting 45nm, 65nm, and 90nm processors), and automatic diode type detection. These sensors offer 1C accuracy for external diode temperatures and 2C for internal diode temperatures,

Product OverviewThe AT30TSE004A is an integrated temperature sensor with a 4-Kbit Serial EEPROM, compliant with JEDEC JC42.4 DIMM Serial Presence Detect (SPD) + TS standards. It operates from a low voltage range of 1.7V to 3.6V and features a 2-wire serial interface compatible with I2C Fast Mode Plus (FM+), supporting 100kHz, 400kHz, and 1MHz speeds. The device includes Schmitt Trigger, filtered inputs for noise suppression and is available in industry-standard green (Pb

Product OverviewThe MCP9700/9700A and MCP9701/9701A are analog temperature sensors featuring a Linear Active Thermistor Integrated Circuit (IC). These low-cost, low-power devices convert temperature into an analog voltage, eliminating the need for external signal conditioning circuits. They are optimized for Analog-to-Digital Converters (ADCs) and offer a wide operating voltage range and low operating current. These sensors are ideal for applications requiring accurate

Product OverviewThe Microchip Technology Inc. TCN75A is a digital temperature sensor that converts ambient temperatures ranging from -40C to +125C into a digital word with a typical accuracy of 1C. It features user-programmable registers for flexible temperature sensing applications, allowing for user-selectable temperature measurement resolutions from 0.5C down to 0.0625C. The device supports power-saving Shutdown and One-shot modes, and can generate an alert signal with

Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It converts temperature from an onboard thermal sensing element into an 8-bit digital word. Communication is via a 2-wire SMBus/I2C compatible serial port, enabling multi-drop/multi-zone monitoring. The device features a low-power Standby mode activated by the SHDN bit in the CONFIG register. With 1C temperature resolution and a nominal

Product OverviewThe TC1047 and TC1047A are linear voltage output temperature sensors that accurately measure temperature from -40C to +125C. Their output voltage is directly proportional to the measured temperature, with a linear slope of 10 mV/C. Available in a space-saving 3-pin SOT-23B package, these sensors are ideal for applications requiring precise temperature monitoring and thermal management in compact designs. They offer very low supply current, making them suitable

Product OverviewThe TC74 is a serially accessible, digital temperature sensor designed for low-cost, small-form-factor applications. It converts temperature from an onboard sensing element into an 8-bit digital word, accessible via a 2-wire SMBus/I2C compatible serial port. This allows for multi-drop/multi-zone monitoring. The TC74 features a low-power Standby mode, activated by the SHDN bit, reducing quiescent current. With a temperature resolution of 1C and a nominal

Product OverviewThe Microchip Technology Inc. MCP9804 is a digital temperature sensor designed for a wide range of applications, offering high accuracy and flexibility. It converts temperatures between -40C and +125C to a digital word with typical accuracy of 0.25C. The sensor features user-programmable registers for settings like shutdown/low-power modes, temperature alert window limits, and critical output limits. An alert signal is generated when temperature boundaries are

Microchip MCP9800/1/2/3 Digital Temperature Sensor The Microchip MCP9800/1/2/3 family of digital temperature sensors are highly accurate, 12-bit resolution devices designed to convert temperature into a digital word. They offer user-selectable resolution from 9 to 12 bits and operate over a wide voltage range of 2.7V to 5.5V. Featuring a 2-wire I2C/SMBus compatible interface, these sensors are ideal for a variety of applications including personal computers, servers, hard

Product OverviewThe AT30TSE752A/754A/758A is a highly accurate digital temperature sensor with integrated nonvolatile registers and serial EEPROM. It features a 2-wire I2C and SMBus compatible serial interface, supporting SMBus Timeout and Alert functionalities. Selectable addressing allows up to eight devices on the same bus. The device operates from a single 1.7V to 5.5V supply and is compatible with 400kHz and 1MHz communication speeds. It is available in industry-standard

Product OverviewThe Microchip Technology Inc. MCP9800/1/2/3 family of digital temperature sensors are high-accuracy, low-power devices that convert temperature to a digital word. Operating from a 2.7V to 5.5V supply, these sensors offer user-selectable resolution from 9 to 12 bits and feature a 2-wire I2C/SMBus compatible interface. With typical accuracy of 0.5C at +25C and a wide operating temperature range of -55C to +125C, they are ideal for various temperature monitoring

Product OverviewThe TC72 is a digital temperature sensor designed for accurate temperature monitoring from -55C to +125C. It features an SPI-compatible serial interface, eliminating the need for external components. The TC72 offers 10-bit resolution, providing precise temperature readings with a typical accuracy of 2C across a wide operating range. It supports both continuous temperature conversion and a power-saving one-shot measurement mode, making it ideal for thermal

Product Overview The MCP9700/9700A and MCP9701/9701A are analog temperature sensors featuring a Linear Active Thermistor Integrated Circuit (IC). These low-cost, low-power sensors convert temperature into an analog voltage, eliminating the need for external signal conditioning circuits required by traditional resistive sensors like thermistors. They offer high accuracy and are optimized for direct connection to microcontroller ADCs. The sensors are immune to parasitic